[Fri Sep 30 03:02:48 2011] Detection parameters:
  Position = (1011.4, 158.7) = 10 47 16.23 59 20 59.2
  Extent = 0.5" x 0.5", rotation angle = 153 degrees
  Source counts = 14.0 +/- 3.9
  Background counts = 1.0
  Rate = 0.0002 +/- 6e-05

[Fri Sep 30 03:02:49 2011] Off-axis axis estimate = 0.88'
[Fri Sep 30 03:03:57 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 03:03:57 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Sep 30 03:03:57 2011] source mask rpix=0.8, npix_max = 6, mask sum = 8, frac = 1.232
[Fri Sep 30 03:03:57 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.38"
[Fri Sep 30 03:03:58 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass0_src13.ximg exists
[Fri Sep 30 03:03:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05031_pi14-548_cl_pass0_src13.csv
[Fri Sep 30 03:03:58 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass0_src13_1.ximg exists
[Fri Sep 30 03:03:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05031_pi14-548_cl_pass0_src13.csv
[Fri Sep 30 03:03:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05031_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05031_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 03:03:58 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri Sep 30 03:03:58 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Sep 30 03:03:58 2011] Fit fullrun_ccd2_acisf05031_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Sep 30 03:04:20 2011] Spatial fit model total counts = 20.614200, observed total counts = 19.000000
[Fri Sep 30 03:04:20 2011] Offset between fit and detection position for source 28 = 0.832751 pixels
[Fri Sep 30 03:04:20 2011] 20.551930 total counts/ 7.041630 bgd. counts: snr = 5.091297
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.832751 pixels
  Position = (1012.1, 159.1) = 10 47 16.21 59 20 59.2
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 13.5 +/- 4.5
  Background counts = 7.0
  Rate = 0.0002 +/- 7e-05
[Fri Sep 30 03:04:20 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 03:04:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 03:04:20 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 03:04:20 2011] Source does appear to be extended
[Fri Sep 30 03:04:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 03:05:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 03:05:09 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Sep 30 03:05:09 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.595
[Fri Sep 30 03:05:09 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.39"
[Fri Sep 30 03:05:11 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass1_src13.ximg exists
[Fri Sep 30 03:05:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05031_pi14-548_cl_pass1_src13.csv
[Fri Sep 30 03:05:11 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass1_src13_1.ximg exists
[Fri Sep 30 03:05:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05031_pi14-548_cl_pass1_src13.csv
[Fri Sep 30 03:05:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05031_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05031_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 03:05:13 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri Sep 30 03:05:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05031_pi14-548_cl_pass1_tfrozen_src13.csv
[Fri Sep 30 03:05:13 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Sep 30 03:05:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05031_pi14-548_cl_pass1_tfrozen_src13.csv
[Fri Sep 30 03:05:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05031_pi14-548_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05031_pi14-548_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 03:05:39 2011] Spatial fit model total counts = 21.296700, observed total counts = 19.000000
[Fri Sep 30 03:05:39 2011] Offset between fit and detection position for source 28 = 0.023364 pixels
[Fri Sep 30 03:05:39 2011] 21.138630 total counts/ 7.549830 bgd. counts: snr = 4.945526
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.023364 pixels
  Position = (1012.1, 159.1) = 10 47 16.21 59 20 59.2
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 13.6 +/- 4.6
  Background counts = 7.5
  Rate = 0.0002 +/- 7e-05
[Fri Sep 30 03:05:39 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 03:05:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 03:05:39 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 03:05:39 2011] Source does appear to be extended
[Fri Sep 30 03:05:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 03:13:49 2011] Not overwriting source region fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28_src.reg
[Fri Sep 30 03:13:49 2011] Extracting stamp from image fullrun_ccd2_acisf05031_pi14-548_cl_sm2.00.img.gz, (994, 142) - (1030, 177)
[Fri Sep 30 03:13:49 2011] Writing fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28.gif
[Fri Sep 30 03:15:29 2011] ../../acisf05031/products/events/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28_src.evt and ../../acisf05031/products/events/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Fri Sep 30 03:15:29 2011] Size of ../../acisf05031/products/events/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28_src.evt.gz[events] = 15 counts
[Fri Sep 30 03:15:29 2011] Mean chipx,y = (162.67, 1009.27)
[Fri Sep 30 03:15:29 2011] Mean tdetx,y = (4070.27, 3923.33)
[Fri Sep 30 03:15:29 2011] chipx,y range = (148.00-183.00, 1003.00-1020.00)
[Fri Sep 30 03:15:29 2011] Size of ../../acisf05031/products/events/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 5 counts
[Fri Sep 30 03:15:29 2011] ../../acisf05031/products/images/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28_src.img and ../../acisf05031/products/images/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Fri Sep 30 03:15:29 2011] Not generating rmf since there are only 13 counts
[Fri Sep 30 03:15:29 2011] arf not found, will run specextract
[Fri Sep 30 03:15:31 2011] ../../acisf05031/products/spectra/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28_bkg.pi not found
[Fri Sep 30 03:15:31 2011] ../../acisf05031/products/spectra/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28.warf not found
[Fri Sep 30 03:15:31 2011] ../../acisf05031/products/spectra/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28.wrmf not found
[Fri Sep 30 03:15:31 2011] Removal of ../../acisf05031/products/spectra/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28.soff failed
[Fri Sep 30 03:15:31 2011] Failed to rename ../../acisf05031/products/spectra/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28_grp.pi to ../../acisf05031/products/spectra/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28_src.pi
[Fri Sep 30 03:15:36 2011] ../../acisf05031/products/lightcurves/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28_src.lc and ../../acisf05031/products/lightcurves/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Fri Sep 30 03:17:58 2011] No arf file found
[Fri Sep 30 03:24:14 2011] Updating aperture counts using extracted products
[Fri Sep 30 03:24:14 2011] Error reading totcts from fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28_src.pi
[Fri Sep 30 03:24:14 2011] No arf file for this source, not re-computing flux
[Fri Sep 30 03:24:21 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 03:24:22 2011] acisf05031/analysis//spectral/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete