[Fri Sep 30 03:02:48 2011] Detection parameters:
  Position = (1142.7, 656.2) = 10 47 7.76 59 25 3.9
  Extent = 0.9" x 0.6", rotation angle = 137 degrees
  Source counts = 13.4 +/- 3.9
  Background counts = 1.6
  Rate = 0.0002 +/- 6e-05

[Fri Sep 30 03:02:49 2011] Off-axis axis estimate = 5.06'
[Fri Sep 30 03:03:57 2011] Using EEF radius (= 1.21 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 03:03:57 2011] Initial guess for spatial extent in simple fitting = 1.21"
[Fri Sep 30 03:03:57 2011] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.034
[Fri Sep 30 03:03:57 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 1.21"
[Fri Sep 30 03:03:58 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass0_src14.ximg exists
[Fri Sep 30 03:03:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05031_pi14-548_cl_pass0_src14.csv
[Fri Sep 30 03:03:58 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass0_src14_1.ximg exists
[Fri Sep 30 03:03:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05031_pi14-548_cl_pass0_src14.csv
[Fri Sep 30 03:03:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05031_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05031_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 03:03:58 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Fri Sep 30 03:03:58 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Sep 30 03:03:58 2011] Fit fullrun_ccd2_acisf05031_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Sep 30 03:04:20 2011] Spatial fit model total counts = 15.706200, observed total counts = 16.000000
[Fri Sep 30 03:04:20 2011] Offset between fit and detection position for source 25 = 0.764823 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.764823 pixels
  Position = (1143.1, 656.8) = 10 47 7.77 59 25 4.0
  Extent = 1.1 (0.8-1.3)", rotation angle = 0
  Source counts = 15.9 +/- 4.0
  Background counts = 0.0
  Rate = 0.0002 +/- 6e-05
[Fri Sep 30 03:04:20 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 03:04:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 03:04:20 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 03:04:20 2011] Source does appear to be extended
[Fri Sep 30 03:04:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 03:05:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 03:05:09 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Fri Sep 30 03:05:09 2011] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.255
[Fri Sep 30 03:05:09 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 1.07"
[Fri Sep 30 03:05:11 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass1_src14.ximg exists
[Fri Sep 30 03:05:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05031_pi14-548_cl_pass1_src14.csv
[Fri Sep 30 03:05:11 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass1_src14_1.ximg exists
[Fri Sep 30 03:05:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05031_pi14-548_cl_pass1_src14.csv
[Fri Sep 30 03:05:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05031_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05031_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 03:05:13 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Fri Sep 30 03:05:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05031_pi14-548_cl_pass1_tfrozen_src14.csv
[Fri Sep 30 03:05:13 2011] fullrun_ccd2_acisf05031_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Sep 30 03:05:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05031_pi14-548_cl_pass1_tfrozen_src14.csv
[Fri Sep 30 03:05:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05031_pi14-548_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05031_pi14-548_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 03:05:39 2011] Spatial fit model total counts = 14.590800, observed total counts = 16.000000
[Fri Sep 30 03:05:39 2011] Offset between fit and detection position for source 25 = 0.161477 pixels
[Fri Sep 30 03:05:39 2011] 14.522900 total counts/ 0.000000 bgd. counts: snr = 368219828635472.687500
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.161477 pixels
  Position = (1143.0, 657.0) = 10 47 7.78 59 25 4.1
  Extent = 1.0 (0.9-1.4)", rotation angle = 0
  Source counts = 14.5 +/- 3.8
  Background counts = 0.0
  Rate = 0.0002 +/- 6e-05
[Fri Sep 30 03:05:39 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 03:05:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 03:05:39 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 03:05:39 2011] Source does appear to be extended
[Fri Sep 30 03:05:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 03:13:49 2011] Not overwriting source region fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25_src.reg
[Fri Sep 30 03:13:49 2011] Extracting stamp from image fullrun_ccd2_acisf05031_pi14-548_cl_sm2.00.img.gz, (1095, 609) - (1191, 705)
[Fri Sep 30 03:13:49 2011] Writing fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25.gif
[Fri Sep 30 03:15:36 2011] ../../acisf05031/products/events/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25_src.evt and ../../acisf05031/products/events/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25_bgd.evt exist, delete to re-create
[Fri Sep 30 03:15:36 2011] Size of ../../acisf05031/products/events/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25_src.evt.gz[events] = 17 counts
[Fri Sep 30 03:15:36 2011] Mean chipx,y = (682.76, 962.18)
[Fri Sep 30 03:15:36 2011] Mean tdetx,y = (4023.18, 3403.24)
[Fri Sep 30 03:15:36 2011] chipx,y range = (660.00-696.00, 943.00-977.00)
[Fri Sep 30 03:15:36 2011] Size of ../../acisf05031/products/events/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 31 counts
[Fri Sep 30 03:15:36 2011] ../../acisf05031/products/images/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25_src.img and ../../acisf05031/products/images/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25_bgd.img exist, delete to re-create
[Fri Sep 30 03:15:36 2011] Not generating rmf since there are only 14 counts
[Fri Sep 30 03:15:36 2011] arf not found, will run specextract
[Fri Sep 30 03:15:38 2011] ../../acisf05031/products/spectra/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25_bkg.pi not found
[Fri Sep 30 03:15:38 2011] ../../acisf05031/products/spectra/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25.warf not found
[Fri Sep 30 03:15:38 2011] ../../acisf05031/products/spectra/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25.wrmf not found
[Fri Sep 30 03:15:38 2011] Removal of ../../acisf05031/products/spectra/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25.soff failed
[Fri Sep 30 03:15:38 2011] Failed to rename ../../acisf05031/products/spectra/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25_grp.pi to ../../acisf05031/products/spectra/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25_src.pi
[Fri Sep 30 03:15:44 2011] ../../acisf05031/products/lightcurves/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25_src.lc and ../../acisf05031/products/lightcurves/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25_bgd.lc exist, delete to re-create
[Fri Sep 30 03:17:58 2011] No arf file found
[Fri Sep 30 03:24:14 2011] Updating aperture counts using extracted products
[Fri Sep 30 03:24:14 2011] Error reading totcts from fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25_src.pi
[Fri Sep 30 03:24:14 2011] No arf file for this source, not re-computing flux
[Fri Sep 30 03:24:21 2011] Source 25 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 03:24:22 2011] acisf05031/analysis//spectral/fullrun_ccd2_acisf05031_pi14-548_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete