[Sun Oct 16 09:09:38 2011] Detection parameters:
  Position = (329.4, 584.9) = 10 43 11.22 59 11 28.5
  Extent = 0.8" x 0.5", rotation angle = 90 degrees
  Source counts = 12.5 +/- 3.7
  Background counts = 1.5
  Rate = 0.0002 +/- 5e-05

[Sun Oct 16 09:09:41 2011] Off-axis axis estimate = 2.63'
[Sun Oct 16 09:10:44 2011] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:10:44 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Sun Oct 16 09:10:44 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.946
[Sun Oct 16 09:10:44 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.51"
[Sun Oct 16 09:10:45 2011] fullrun_ccd3_acisf05029_pi14-548_cl_pass0_src21.ximg exists
[Sun Oct 16 09:10:45 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf05029_pi14-548_cl_pass0_src21.csv
[Sun Oct 16 09:10:45 2011] fullrun_ccd3_acisf05029_pi14-548_cl_pass0_src21_1.ximg exists
[Sun Oct 16 09:10:45 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf05029_pi14-548_cl_pass0_src21.csv
[Sun Oct 16 09:10:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05029_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05029_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:10:46 2011] fullrun_ccd3_acisf05029_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Sun Oct 16 09:10:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05029_pi14-548_cl_pass0_tfrozen_src21.csv
[Sun Oct 16 09:10:46 2011] fullrun_ccd3_acisf05029_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Oct 16 09:10:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05029_pi14-548_cl_pass0_tfrozen_src21.csv
[Sun Oct 16 09:10:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05029_pi14-548_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05029_pi14-548_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:11:02 2011] Spatial fit model total counts = 12.138600, observed total counts = 15.000000
[Sun Oct 16 09:11:02 2011] Offset between fit and detection position for source 18 = 1.200907 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.200907 pixels
  Position = (329.9, 586.0) = 10 43 11.22 59 11 28.8
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 12.1 +/- 3.5
  Background counts = 0.0
  Rate = 0.0002 +/- 5e-05
[Sun Oct 16 09:11:02 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:11:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:11:02 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:11:02 2011] Source does appear to be extended
[Sun Oct 16 09:11:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:11:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:11:30 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Sun Oct 16 09:11:30 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.134
[Sun Oct 16 09:11:30 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 0.68"
[Sun Oct 16 09:11:31 2011] fullrun_ccd3_acisf05029_pi14-548_cl_pass1_src21.ximg exists
[Sun Oct 16 09:11:31 2011] fullrun_ccd3_acisf05029_pi14-548_cl_pass1_src21_1.ximg exists
[Sun Oct 16 09:11:31 2011] Fit fullrun_ccd3_acisf05029_pi14-548_cl_pass1_src21 appears to have run properly
[Sun Oct 16 09:11:31 2011] fullrun_ccd3_acisf05029_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Sun Oct 16 09:11:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05029_pi14-548_cl_pass1_tfrozen_src21.csv
[Sun Oct 16 09:11:31 2011] fullrun_ccd3_acisf05029_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Oct 16 09:11:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05029_pi14-548_cl_pass1_tfrozen_src21.csv
[Sun Oct 16 09:11:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05029_pi14-548_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05029_pi14-548_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:11:46 2011] Spatial fit model total counts = 13.412300, observed total counts = 15.000000
[Sun Oct 16 09:11:46 2011] Offset between fit and detection position for source 18 = 0.008722 pixels
[Sun Oct 16 09:11:46 2011] 13.224392 total counts/ 0.045492 bgd. counts: snr = 61.788933
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.008722 pixels
  Position = (329.9, 586.0) = 10 43 11.22 59 11 28.8
  Extent = 0.6 (0.5-1.0)", rotation angle = 0
  Source counts = 13.2 +/- 3.6
  Background counts = 0.0
  Rate = 0.0002 +/- 5e-05
[Sun Oct 16 09:11:46 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:11:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:11:46 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:11:46 2011] Source does appear to be extended
[Sun Oct 16 09:11:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:18:40 2011] Not overwriting source region fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18_src.reg
[Sun Oct 16 09:18:40 2011] Extracting stamp from image fullrun_ccd3_acisf05029_pi14-548_cl_sm2.00.img.gz, (302, 558) - (358, 614)
[Sun Oct 16 09:18:40 2011] Writing fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18.gif
[Sun Oct 16 09:21:14 2011] ../../acisf05029/products/events/fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18_src.evt and ../../acisf05029/products/events/fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sun Oct 16 09:21:15 2011] Size of ../../acisf05029/products/events/fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18_src.evt.gz[events] = 13 counts
[Sun Oct 16 09:21:15 2011] Mean chipx,y = (713.23, 801.23)
[Sun Oct 16 09:21:15 2011] Mean tdetx,y = (4330.77, 3774.23)
[Sun Oct 16 09:21:15 2011] chipx,y range = (698.00-730.00, 785.00-815.00)
[Sun Oct 16 09:21:15 2011] Size of ../../acisf05029/products/events/fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 14 counts
[Sun Oct 16 09:21:15 2011] ../../acisf05029/products/images/fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18_src.img and ../../acisf05029/products/images/fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Sun Oct 16 09:21:15 2011] Not generating rmf since there are only 13 counts
[Sun Oct 16 09:21:15 2011] arf not found, will run specextract
[Sun Oct 16 09:21:16 2011] ../../acisf05029/products/spectra/fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18_bkg.pi not found
[Sun Oct 16 09:21:16 2011] ../../acisf05029/products/spectra/fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18.warf not found
[Sun Oct 16 09:21:16 2011] ../../acisf05029/products/spectra/fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18.wrmf not found
[Sun Oct 16 09:21:16 2011] Removal of ../../acisf05029/products/spectra/fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18.soff failed
[Sun Oct 16 09:21:16 2011] Failed to rename ../../acisf05029/products/spectra/fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18_grp.pi to ../../acisf05029/products/spectra/fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18_src.pi
[Sun Oct 16 09:21:22 2011] ../../acisf05029/products/lightcurves/fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18_src.lc and ../../acisf05029/products/lightcurves/fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sun Oct 16 09:23:51 2011] No arf file found
[Sun Oct 16 09:24:03 2011] Updating aperture counts using extracted products
[Sun Oct 16 09:24:03 2011] Error reading totcts from fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18_src.pi
[Sun Oct 16 09:24:03 2011] No arf file for this source, not re-computing flux
[Sun Oct 16 09:24:10 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 16 09:24:11 2011] acisf05029/analysis//spectral/fullrun_ccd3_acisf05029_pi14-548_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete