[Sun Oct 16 09:09:32 2011] Detection parameters:
  Position = (975.6, 221.9) = 10 42 54.30 59 0 30.9
  Extent = 2.4" x 1.4", rotation angle = 93 degrees
  Source counts = 10.6 +/- 4.1
  Background counts = 6.4
  Rate = 0.0001 +/- 6e-05

[Sun Oct 16 09:09:33 2011] Off-axis axis estimate = 10.72'
[Sun Oct 16 09:10:41 2011] Using EEF radius (= 5.11 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:10:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 09:10:41 2011] Initial guess for spatial extent in simple fitting = 5.11"
[Sun Oct 16 09:10:41 2011] source mask rpix=10.4, npix_max = 473, mask sum = 462, frac = 0.976
[Sun Oct 16 09:10:41 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 5.11"
[Sun Oct 16 09:10:42 2011] fullrun_ccd1_acisf05029_pi14-548_cl_pass0_src19.ximg exists
[Sun Oct 16 09:10:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05029_pi14-548_cl_pass0_src19.csv
[Sun Oct 16 09:10:42 2011] fullrun_ccd1_acisf05029_pi14-548_cl_pass0_src19_1.ximg exists
[Sun Oct 16 09:10:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05029_pi14-548_cl_pass0_src19.csv
[Sun Oct 16 09:10:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf05029_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf05029_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:10:43 2011] fullrun_ccd1_acisf05029_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Sun Oct 16 09:10:43 2011] fullrun_ccd1_acisf05029_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Oct 16 09:10:43 2011] Fit fullrun_ccd1_acisf05029_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Oct 16 09:10:57 2011] Spatial fit model total counts = 56.513100, observed total counts = 55.000000
[Sun Oct 16 09:10:57 2011] Offset between fit and detection position for source 28 = 0.857433 pixels
[Sun Oct 16 09:10:57 2011] 56.265880 total counts/ 47.290400 bgd. counts: snr = 1.305182
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.857433 pixels
  Position = (976.2, 222.4) = 10 42 54.29 59 0 30.9
  Extent = 1.3" x 1.3", rotation angle = 0
  Source counts = 9.0 +/- 7.5
  Background counts = 47.3
  Rate = 0.0001 +/- 0.0001
  Deleting source due to low Poisson probability