[Wed Oct  5 16:58:04 2011] Detection parameters:
  Position = (886.4, 497.7) = 10 47 1.88 59 6 37.7
  Extent = 1.5" x 1.2", rotation angle = 130 degrees
  Source counts = 39.0 +/- 7.0
  Background counts = 10.0
  Rate = 0.0005 +/- 0.0001

[Wed Oct  5 16:58:05 2011] Off-axis axis estimate = 6.93'
[Wed Oct  5 16:59:23 2011] Using EEF radius (= 2.14 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 16:59:23 2011] Initial guess for spatial extent in simple fitting = 2.14"
[Wed Oct  5 16:59:23 2011] source mask rpix=4.3, npix_max = 93, mask sum = 90, frac = 0.960
[Wed Oct  5 16:59:23 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 2.14"
[Wed Oct  5 16:59:24 2011] fullrun_ccd3_acisf05028_pi14-548_cl_pass0_src12.ximg exists
[Wed Oct  5 16:59:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05028_pi14-548_cl_pass0_src12.csv
[Wed Oct  5 16:59:24 2011] fullrun_ccd3_acisf05028_pi14-548_cl_pass0_src12_1.ximg exists
[Wed Oct  5 16:59:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05028_pi14-548_cl_pass0_src12.csv
[Wed Oct  5 16:59:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05028_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05028_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 16:59:25 2011] fullrun_ccd3_acisf05028_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Wed Oct  5 16:59:25 2011] fullrun_ccd3_acisf05028_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Oct  5 16:59:25 2011] Fit fullrun_ccd3_acisf05028_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Wed Oct  5 16:59:42 2011] Spatial fit model total counts = 51.874900, observed total counts = 52.000000
[Wed Oct  5 16:59:42 2011] Offset between fit and detection position for source 27 = 0.459997 pixels
[Wed Oct  5 16:59:42 2011] 52.355500 total counts/ 13.134100 bgd. counts: snr = 10.822384
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.459997 pixels
  Position = (886.7, 498.0) = 10 47 1.89 59 6 37.6
  Extent = 1.9 (1.2-2.6)", rotation angle = 0
  Source counts = 39.2 +/- 7.2
  Background counts = 13.1
  Rate = 0.0006 +/- 0.0001
[Wed Oct  5 16:59:42 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 16:59:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 16:59:42 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 16:59:42 2011] Source does appear to be extended
[Wed Oct  5 16:59:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:00:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 17:00:10 2011] Initial guess for spatial extent in simple fitting = 1.95"
[Wed Oct  5 17:00:10 2011] source mask rpix=4.0, npix_max = 79, mask sum = 72, frac = 0.904
[Wed Oct  5 17:00:10 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 1.95"
[Wed Oct  5 17:00:11 2011] fullrun_ccd3_acisf05028_pi14-548_cl_pass1_src12.ximg exists
[Wed Oct  5 17:00:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05028_pi14-548_cl_pass1_src12.csv
[Wed Oct  5 17:00:11 2011] fullrun_ccd3_acisf05028_pi14-548_cl_pass1_src12_1.ximg exists
[Wed Oct  5 17:00:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05028_pi14-548_cl_pass1_src12.csv
[Wed Oct  5 17:00:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05028_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05028_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:00:12 2011] fullrun_ccd3_acisf05028_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Wed Oct  5 17:00:12 2011] fullrun_ccd3_acisf05028_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Oct  5 17:00:12 2011] Fit fullrun_ccd3_acisf05028_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Oct  5 17:00:27 2011] Spatial fit model total counts = 51.925700, observed total counts = 52.000000
[Wed Oct  5 17:00:27 2011] Offset between fit and detection position for source 27 = 0.753336 pixels
[Wed Oct  5 17:00:27 2011] 52.334200 total counts/ 21.762000 bgd. counts: snr = 6.553560
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.753336 pixels
  Position = (886.5, 498.8) = 10 47 1.90 59 6 38.0
  Extent = 1.6 (0.9-2.6)", rotation angle = 0
  Source counts = 30.6 +/- 7.2
  Background counts = 21.8
  Rate = 0.0004 +/- 0.0001
[Wed Oct  5 17:00:27 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:00:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:00:27 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 17:00:27 2011] Source does appear to be extended
[Wed Oct  5 17:00:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:05:46 2011] Not overwriting source region fullrun_ccd3_acisf05028_pi14-548_pass1_cl_src27_src.reg
[Wed Oct  5 17:05:46 2011] Extracting stamp from image fullrun_ccd3_acisf05028_pi14-548_cl_sm2.00.img.gz, (814, 426) - (959, 571)
[Wed Oct  5 17:05:46 2011] Writing fullrun_ccd3_acisf05028_pi14-548_pass1_cl_src27.gif
[Wed Oct  5 17:06:33 2011] ../../acisf05028/products/events/fullrun_ccd3_acisf05028_pi14-548_pass1_cl_src27_src.evt and ../../acisf05028/products/events/fullrun_ccd3_acisf05028_pi14-548_pass1_cl_src27_bgd.evt exist, delete to re-create
[Wed Oct  5 17:06:34 2011] Size of ../../acisf05028/products/events/fullrun_ccd3_acisf05028_pi14-548_pass1_cl_src27_src.evt.gz[events] = 51 counts
[Wed Oct  5 17:06:34 2011] Mean chipx,y = (574.92, 252.49)
[Wed Oct  5 17:06:34 2011] Mean tdetx,y = (4879.51, 3635.92)
[Wed Oct  5 17:06:34 2011] chipx,y range = (548.00-601.00, 231.00-279.00)
[Wed Oct  5 17:06:34 2011] Size of ../../acisf05028/products/events/fullrun_ccd3_acisf05028_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 107 counts
[Wed Oct  5 17:06:34 2011] ../../acisf05028/products/images/fullrun_ccd3_acisf05028_pi14-548_pass1_cl_src27_src.img and ../../acisf05028/products/images/fullrun_ccd3_acisf05028_pi14-548_pass1_cl_src27_bgd.img exist, delete to re-create
[Wed Oct  5 17:06:34 2011] ../../acisf05028/products/spectra/fullrun_ccd3_acisf05028_pi14-548_pass1_cl_src27_src.pi and ../../acisf05028/products/spectra/fullrun_ccd3_acisf05028_pi14-548_pass1_cl_src27_bgd.pi exist, delete to re-create
[Wed Oct  5 17:06:34 2011] Not generating rmf since there are only 30 counts
[Wed Oct  5 17:06:37 2011] ../../acisf05028/products/lightcurves/fullrun_ccd3_acisf05028_pi14-548_pass1_cl_src27_src.lc and ../../acisf05028/products/lightcurves/fullrun_ccd3_acisf05028_pi14-548_pass1_cl_src27_bgd.lc exist, delete to re-create
[Wed Oct  5 17:08:46 2011] 174.023
[Wed Oct  5 17:09:25 2011] Updating aperture counts using extracted products
[Wed Oct  5 17:09:25 2011] Error reading totcts from fullrun_ccd3_acisf05028_pi14-548_pass1_cl_src27_src.pi.gz
[Wed Oct  5 17:09:25 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 17:09:25 2011] Using photon index=1.80, rate=0.00043, arf fullrun_ccd3_acisf05028_pi14-548_pass1_cl_src27.arf
[Wed Oct  5 17:09:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 17:09:25 2011] Updating source flux to 5.8e-15
[Wed Oct  5 17:09:54 2011] Source 27 has fewer than 100.000000 counts, skipping spectral fitting