[Wed Oct  5 16:57:59 2011] Detection parameters:
  Position = (761.2, 627.8) = 10 48 11.69 59 10 46.8
  Extent = 0.9" x 0.7", rotation angle = 177 degrees
  Source counts = 303.9 +/- 17.7
  Background counts = 8.1
  Rate = 0.004 +/- 0.0002

[Wed Oct  5 16:58:02 2011] Off-axis axis estimate = 5.26'
[Wed Oct  5 16:59:22 2011] Using EEF radius (= 1.29 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 16:59:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 16:59:22 2011] Initial guess for spatial extent in simple fitting = 1.29"
[Wed Oct  5 16:59:22 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.927
[Wed Oct  5 16:59:22 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.29"
[Wed Oct  5 16:59:22 2011] fullrun_ccd2_acisf05028_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct  5 16:59:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05028_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 16:59:22 2011] fullrun_ccd2_acisf05028_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct  5 16:59:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05028_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 16:59:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05028_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05028_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 16:59:22 2011] fullrun_ccd2_acisf05028_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 16:59:22 2011] fullrun_ccd2_acisf05028_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 16:59:22 2011] Fit fullrun_ccd2_acisf05028_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 16:59:38 2011] Spatial fit model total counts = 313.241000, observed total counts = 312.000000
[Wed Oct  5 16:59:38 2011] Offset between fit and detection position for source 1 = 0.650823 pixels
[Wed Oct  5 16:59:38 2011] 313.435900 total counts/ 21.862900 bgd. counts: snr = 62.358179
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.650823 pixels
  Position = (761.4, 628.5) = 10 48 11.71 59 10 46.9
  Extent = 1.2 (1.1-1.3)", rotation angle = 0
  Source counts = 291.6 +/- 17.7
  Background counts = 21.9
  Rate = 0.004 +/- 0.0002
[Wed Oct  5 16:59:38 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 16:59:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 16:59:38 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 16:59:38 2011] Source does appear to be extended
[Wed Oct  5 16:59:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:00:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 17:00:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 17:00:08 2011] Initial guess for spatial extent in simple fitting = 1.21"
[Wed Oct  5 17:00:08 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Wed Oct  5 17:00:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.21"
[Wed Oct  5 17:00:09 2011] fullrun_ccd2_acisf05028_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct  5 17:00:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05028_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 17:00:09 2011] fullrun_ccd2_acisf05028_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct  5 17:00:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05028_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 17:00:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05028_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05028_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:00:10 2011] fullrun_ccd2_acisf05028_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 17:00:10 2011] fullrun_ccd2_acisf05028_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 17:00:10 2011] Fit fullrun_ccd2_acisf05028_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 17:00:24 2011] Spatial fit model total counts = 315.865000, observed total counts = 311.000000
[Wed Oct  5 17:00:24 2011] Offset between fit and detection position for source 1 = 0.037475 pixels
[Wed Oct  5 17:00:24 2011] 315.768700 total counts/ 21.723700 bgd. counts: snr = 63.088020
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.037475 pixels
  Position = (761.4, 628.5) = 10 48 11.71 59 10 46.9
  Extent = 1.2 (1.1-1.3)", rotation angle = 0
  Source counts = 294.0 +/- 17.8
  Background counts = 21.7
  Rate = 0.004 +/- 0.0002
[Wed Oct  5 17:00:24 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:00:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:00:24 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 17:00:24 2011] Source does appear to be extended
[Wed Oct  5 17:00:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:04:21 2011] Not overwriting source region fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1_src.reg
[Wed Oct  5 17:04:21 2011] Extracting stamp from image fullrun_ccd2_acisf05028_pi14-548_cl_sm2.00.img.gz, (706, 573) - (817, 684)
[Wed Oct  5 17:04:21 2011] Writing fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1.gif
[Wed Oct  5 17:04:22 2011] ../../acisf05028/products/events/fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1_src.evt and ../../acisf05028/products/events/fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct  5 17:04:22 2011] Size of ../../acisf05028/products/events/fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1_src.evt.gz[events] = 311 counts
[Wed Oct  5 17:04:22 2011] Mean chipx,y = (527.90, 615.93)
[Wed Oct  5 17:04:22 2011] Mean tdetx,y = (3676.93, 3558.10)
[Wed Oct  5 17:04:22 2011] chipx,y range = (503.00-544.00, 593.00-638.00)
[Wed Oct  5 17:04:22 2011] Size of ../../acisf05028/products/events/fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 54 counts
[Wed Oct  5 17:04:22 2011] ../../acisf05028/products/images/fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1_src.img and ../../acisf05028/products/images/fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct  5 17:04:22 2011] ../../acisf05028/products/spectra/fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1_src.pi and ../../acisf05028/products/spectra/fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct  5 17:04:26 2011] ../../acisf05028/products/lightcurves/fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1_src.lc and ../../acisf05028/products/lightcurves/fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct  5 17:05:45 2011] Keeping rmf generated by specextract
[Wed Oct  5 17:05:45 2011] 184.582
[Wed Oct  5 17:09:24 2011] Updating aperture counts using extracted products
[Wed Oct  5 17:09:24 2011] Error reading totcts from fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct  5 17:09:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 17:09:24 2011] Using photon index=1.80, rate=0.00413, arf fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1.arf
[Wed Oct  5 17:09:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 17:09:24 2011] Updating source flux to 5.1e-14
[Wed Oct  5 17:09:54 2011] Reading fit data from acisf05028/analysis//spectral/fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct  5 17:09:54 2011] Spectral fit parameter nH value = 2.32198e+20
[Wed Oct  5 17:09:54 2011] Spectral fit parameter PhoIndex value = 2.15475
[Wed Oct  5 17:09:54 2011] Failed to get F(0.3-8.0) from acisf05028/analysis//spectral/fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 17:09:54 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 17:09:54 2011] Using Nh = 2.3e+20, photon index=2.15, rate=0.00413, arf fullrun_ccd2_acisf05028_pi14-548_pass1_cl_src1.arf
[Wed Oct  5 17:09:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 17:09:54 2011] Updating source flux to 4.8e-14