[Tue Oct  4 14:12:54 2011] Detection parameters:
  Position = (1041.6, 838.7) = 10 47 30.97 58 55 41.5
  Extent = 3.1" x 2.0", rotation angle = 32 degrees
  Source counts = 23.5 +/- 6.2
  Background counts = 15.5
  Rate = 0.0003 +/- 9e-05

[Tue Oct  4 14:12:55 2011] Off-axis axis estimate = 9.14'
[Tue Oct  4 14:14:00 2011] Using EEF radius (= 3.69 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 14:14:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 14:14:00 2011] Initial guess for spatial extent in simple fitting = 3.69"
[Tue Oct  4 14:14:00 2011] source mask rpix=7.5, npix_max = 256, mask sum = 256, frac = 0.999
[Tue Oct  4 14:14:00 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 3.69"
[Tue Oct  4 14:14:01 2011] fullrun_ccd3_acisf05026_pi14-548_cl_pass0_src10.ximg exists
[Tue Oct  4 14:14:01 2011] fullrun_ccd3_acisf05026_pi14-548_cl_pass0_src10_1.ximg exists
[Tue Oct  4 14:14:01 2011] Fit fullrun_ccd3_acisf05026_pi14-548_cl_pass0_src10 appears to have run properly
[Tue Oct  4 14:14:01 2011] fullrun_ccd3_acisf05026_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Tue Oct  4 14:14:01 2011] fullrun_ccd3_acisf05026_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Oct  4 14:14:01 2011] Fit fullrun_ccd3_acisf05026_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Oct  4 14:14:14 2011] Spatial fit model total counts = 62.176100, observed total counts = 60.000000
[Tue Oct  4 14:14:14 2011] Offset between fit and detection position for source 26 = 2.521863 pixels
[Tue Oct  4 14:14:14 2011] 62.351300 total counts/ 49.510000 bgd. counts: snr = 1.824999
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 2.521863 pixels
  Position = (1042.6, 841.0) = 10 47 30.93 58 55 42.4
  Extent = 0.9" x 0.9", rotation angle = 0
  Source counts = 12.8 +/- 7.9
  Background counts = 49.5
  Rate = 0.0002 +/- 0.0001
[Tue Oct  4 14:14:14 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 14:14:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 14:14:14 2011] Assessing source extent using major
[Tue Oct  4 14:14:14 2011] Source does appear to be extended
[Tue Oct  4 14:14:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 14:14:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 14:14:42 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Tue Oct  4 14:14:42 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.886
[Tue Oct  4 14:14:42 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.92"
[Tue Oct  4 14:14:43 2011] fullrun_ccd3_acisf05026_pi14-548_cl_pass1_src10.ximg exists
[Tue Oct  4 14:14:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05026_pi14-548_cl_pass1_src10.csv
[Tue Oct  4 14:14:43 2011] fullrun_ccd3_acisf05026_pi14-548_cl_pass1_src10_1.ximg exists
[Tue Oct  4 14:14:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05026_pi14-548_cl_pass1_src10.csv
[Tue Oct  4 14:14:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05026_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05026_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 14:14:44 2011] fullrun_ccd3_acisf05026_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue Oct  4 14:14:44 2011] fullrun_ccd3_acisf05026_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Oct  4 14:14:44 2011] Fit fullrun_ccd3_acisf05026_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Oct  4 14:14:58 2011] Spatial fit model total counts = 18.624600, observed total counts = 19.000000
[Tue Oct  4 14:14:58 2011] Offset between fit and detection position for source 26 = 0.677235 pixels
[Tue Oct  4 14:14:58 2011] 19.092860 total counts/ 8.571560 bgd. counts: snr = 3.593681
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.677235 pixels
  Position = (1042.1, 841.4) = 10 47 30.96 58 55 42.6
  Extent = 0.6 (0.4-1.1)", rotation angle = 0
  Source counts = 10.5 +/- 4.4
  Background counts = 8.6
  Rate = 0.0002 +/- 6e-05
[Tue Oct  4 14:14:58 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 14:14:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 14:14:58 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 14:14:58 2011] Source does appear to be extended
[Tue Oct  4 14:14:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 14:20:35 2011] Not overwriting source region fullrun_ccd3_acisf05026_pi14-548_pass1_cl_src26_src.reg
[Tue Oct  4 14:20:35 2011] Extracting stamp from image fullrun_ccd3_acisf05026_pi14-548_cl_sm2.00.img.gz, (1012, 812) - (1072, 871)
[Tue Oct  4 14:20:35 2011] Writing fullrun_ccd3_acisf05026_pi14-548_pass1_cl_src26.gif
[Tue Oct  4 14:21:16 2011] ../../acisf05026/products/events/fullrun_ccd3_acisf05026_pi14-548_pass1_cl_src26_src.evt and ../../acisf05026/products/events/fullrun_ccd3_acisf05026_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Tue Oct  4 14:21:16 2011] Size of ../../acisf05026/products/events/fullrun_ccd3_acisf05026_pi14-548_pass1_cl_src26_src.evt.gz[events] = 14 counts
[Tue Oct  4 14:21:16 2011] Mean chipx,y = (196.07, 189.79)
[Tue Oct  4 14:21:16 2011] Mean tdetx,y = (4942.21, 3257.07)
[Tue Oct  4 14:21:16 2011] chipx,y range = (175.00-211.00, 175.00-207.00)
[Tue Oct  4 14:21:17 2011] Size of ../../acisf05026/products/events/fullrun_ccd3_acisf05026_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 26 counts
[Tue Oct  4 14:21:17 2011] ../../acisf05026/products/images/fullrun_ccd3_acisf05026_pi14-548_pass1_cl_src26_src.img and ../../acisf05026/products/images/fullrun_ccd3_acisf05026_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Tue Oct  4 14:21:17 2011] ../../acisf05026/products/spectra/fullrun_ccd3_acisf05026_pi14-548_pass1_cl_src26_src.pi and ../../acisf05026/products/spectra/fullrun_ccd3_acisf05026_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Tue Oct  4 14:21:17 2011] Not generating rmf since there are only 10 counts
[Tue Oct  4 14:21:20 2011] ../../acisf05026/products/lightcurves/fullrun_ccd3_acisf05026_pi14-548_pass1_cl_src26_src.lc and ../../acisf05026/products/lightcurves/fullrun_ccd3_acisf05026_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Tue Oct  4 14:22:59 2011] 159.967
[Tue Oct  4 14:23:17 2011] Updating aperture counts using extracted products
[Tue Oct  4 14:23:17 2011] Error reading totcts from fullrun_ccd3_acisf05026_pi14-548_pass1_cl_src26_src.pi.gz
[Tue Oct  4 14:23:17 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 14:23:17 2011] Using photon index=1.80, rate=0.000153, arf fullrun_ccd3_acisf05026_pi14-548_pass1_cl_src26.arf
[Tue Oct  4 14:23:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct  4 14:23:17 2011] Updating source flux to 2.3e-15
[Tue Oct  4 14:23:39 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting