[Fri Oct  7 20:55:32 2011] Detection parameters:
  Position = (1040.5, 817.5) = 10 46 1.00 59 7 14.3
  Extent = 1.6" x 1.1", rotation angle = 165 degrees
  Source counts = 70.8 +/- 9.0
  Background counts = 10.2
  Rate = 0.001 +/- 0.0001

[Fri Oct  7 20:55:34 2011] Off-axis axis estimate = 6.26'
[Fri Oct  7 20:56:47 2011] Using EEF radius (= 1.76 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 20:56:47 2011] Initial guess for spatial extent in simple fitting = 1.76"
[Fri Oct  7 20:56:47 2011] source mask rpix=3.6, npix_max = 66, mask sum = 81, frac = 1.213
[Fri Oct  7 20:56:47 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 1.76"
[Fri Oct  7 20:56:53 2011] fullrun_ccd2_acisf05023_pi14-548_cl_pass0_src7.ximg exists
[Fri Oct  7 20:56:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05023_pi14-548_cl_pass0_src7.csv
[Fri Oct  7 20:56:53 2011] fullrun_ccd2_acisf05023_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Oct  7 20:56:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05023_pi14-548_cl_pass0_src7.csv
[Fri Oct  7 20:56:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05023_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05023_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 20:56:54 2011] fullrun_ccd2_acisf05023_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Oct  7 20:56:54 2011] fullrun_ccd2_acisf05023_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Oct  7 20:56:54 2011] Fit fullrun_ccd2_acisf05023_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Oct  7 20:57:12 2011] Spatial fit model total counts = 82.117900, observed total counts = 83.000000
[Fri Oct  7 20:57:12 2011] Offset between fit and detection position for source 5 = 0.458527 pixels
[Fri Oct  7 20:57:12 2011] 84.368100 total counts/ 42.276900 bgd. counts: snr = 6.473509
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.458527 pixels
  Position = (1040.6, 817.9) = 10 46 1.02 59 7 14.3
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 42.1 +/- 9.2
  Background counts = 42.3
  Rate = 0.0006 +/- 0.0001
[Fri Oct  7 20:57:12 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 20:57:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 20:57:12 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 20:57:12 2011] Source does appear to be extended
[Fri Oct  7 20:57:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:57:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 20:57:45 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Fri Oct  7 20:57:45 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.009
[Fri Oct  7 20:57:45 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.73"
[Fri Oct  7 20:57:46 2011] fullrun_ccd2_acisf05023_pi14-548_cl_pass1_src7.ximg exists
[Fri Oct  7 20:57:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05023_pi14-548_cl_pass1_src7.csv
[Fri Oct  7 20:57:46 2011] fullrun_ccd2_acisf05023_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Oct  7 20:57:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05023_pi14-548_cl_pass1_src7.csv
[Fri Oct  7 20:57:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05023_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05023_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 20:57:46 2011] fullrun_ccd2_acisf05023_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Oct  7 20:57:46 2011] fullrun_ccd2_acisf05023_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Oct  7 20:57:46 2011] Fit fullrun_ccd2_acisf05023_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Oct  7 20:58:05 2011] Spatial fit model total counts = 70.985300, observed total counts = 72.000000
[Fri Oct  7 20:58:05 2011] Offset between fit and detection position for source 5 = 0.036914 pixels
[Fri Oct  7 20:58:05 2011] 72.152200 total counts/ 31.994300 bgd. counts: snr = 7.099613
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.036914 pixels
  Position = (1040.6, 817.9) = 10 46 1.02 59 7 14.3
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 40.2 +/- 8.5
  Background counts = 32.0
  Rate = 0.0006 +/- 0.0001
[Fri Oct  7 20:58:05 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 20:58:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 20:58:05 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 20:58:05 2011] Source does appear to be extended
[Fri Oct  7 20:58:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 21:00:56 2011] Not overwriting source region fullrun_ccd2_acisf05023_pi14-548_pass1_cl_src5_src.reg
[Fri Oct  7 21:00:56 2011] Extracting stamp from image fullrun_ccd2_acisf05023_pi14-548_cl_sm2.00.img.gz, (1008, 785) - (1073, 850)
[Fri Oct  7 21:00:57 2011] Writing fullrun_ccd2_acisf05023_pi14-548_pass1_cl_src5.gif
[Fri Oct  7 21:01:24 2011] ../../acisf05023/products/events/fullrun_ccd2_acisf05023_pi14-548_pass1_cl_src5_src.evt and ../../acisf05023/products/events/fullrun_ccd2_acisf05023_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Oct  7 21:01:24 2011] Size of ../../acisf05023/products/events/fullrun_ccd2_acisf05023_pi14-548_pass1_cl_src5_src.evt.gz[events] = 54 counts
[Fri Oct  7 21:01:24 2011] Mean chipx,y = (800.80, 848.81)
[Fri Oct  7 21:01:24 2011] Mean tdetx,y = (3909.81, 3285.20)
[Fri Oct  7 21:01:24 2011] chipx,y range = (784.00-816.00, 827.00-865.00)
[Fri Oct  7 21:01:24 2011] Size of ../../acisf05023/products/events/fullrun_ccd2_acisf05023_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 20 counts
[Fri Oct  7 21:01:24 2011] ../../acisf05023/products/images/fullrun_ccd2_acisf05023_pi14-548_pass1_cl_src5_src.img and ../../acisf05023/products/images/fullrun_ccd2_acisf05023_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Oct  7 21:01:24 2011] ../../acisf05023/products/spectra/fullrun_ccd2_acisf05023_pi14-548_pass1_cl_src5_src.pi and ../../acisf05023/products/spectra/fullrun_ccd2_acisf05023_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri Oct  7 21:01:24 2011] Not generating rmf since there are only 40 counts
[Fri Oct  7 21:01:28 2011] ../../acisf05023/products/lightcurves/fullrun_ccd2_acisf05023_pi14-548_pass1_cl_src5_src.lc and ../../acisf05023/products/lightcurves/fullrun_ccd2_acisf05023_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Oct  7 21:03:05 2011] 176.941
[Fri Oct  7 21:04:32 2011] Updating aperture counts using extracted products
[Fri Oct  7 21:04:32 2011] Error reading totcts from fullrun_ccd2_acisf05023_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Oct  7 21:04:33 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 21:04:33 2011] Using photon index=1.80, rate=0.000598, arf fullrun_ccd2_acisf05023_pi14-548_pass1_cl_src5.arf
[Fri Oct  7 21:04:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 21:04:33 2011] Updating source flux to 7.8e-15
[Fri Oct  7 21:04:46 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting