[Fri Oct 14 11:22:10 2011] Detection parameters:
  Position = (565.3, 34.4) = 3 33 20.66 -27 41 4.4
  Extent = 0.7" x 0.5", rotation angle = 62 degrees
  Source counts = 37.0 +/- 6.2
  Background counts = 2.0
  Rate = 0.0005 +/- 8e-05

[Fri Oct 14 11:22:10 2011] Off-axis axis estimate = 3.34'
[Fri Oct 14 13:05:22 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 13:05:22 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Fri Oct 14 13:05:22 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.899
[Fri Oct 14 13:05:22 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.65"
[Fri Oct 14 13:36:10 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src8.ximg exists
[Fri Oct 14 13:36:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src8.csv
[Fri Oct 14 13:36:10 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src8_1.ximg exists
[Fri Oct 14 13:36:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src8.csv
[Fri Oct 14 13:36:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 13:36:10 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Fri Oct 14 13:36:10 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Oct 14 13:36:10 2011] Fit fullrun_ccd3_acisf05016_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Oct 14 13:36:29 2011] Spatial fit model total counts = 42.989600, observed total counts = 43.000000
[Fri Oct 14 13:36:29 2011] Offset between fit and detection position for source 38 = 0.726979 pixels
[Fri Oct 14 13:36:29 2011] 42.948460 total counts/ 8.991960 bgd. counts: snr = 11.323892
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.726979 pixels
  Position = (565.9, 34.8) = 3 33 20.66 -27 41 4.5
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 34.0 +/- 6.6
  Background counts = 9.0
  Rate = 0.0004 +/- 8e-05
[Fri Oct 14 13:36:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 13:36:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 13:36:29 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 13:36:29 2011] Source does appear to be extended
[Fri Oct 14 13:36:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 15:00:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 15:00:20 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Fri Oct 14 15:00:20 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.897
[Fri Oct 14 15:00:20 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.53"
[Fri Oct 14 15:28:48 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src8.ximg exists
[Fri Oct 14 15:28:48 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src8.csv
[Fri Oct 14 15:28:48 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src8_1.ximg exists
[Fri Oct 14 15:28:48 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src8.csv
[Fri Oct 14 15:28:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 15:28:49 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Fri Oct 14 15:28:49 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Oct 14 15:28:49 2011] Fit fullrun_ccd3_acisf05016_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Oct 14 15:29:05 2011] Spatial fit model total counts = 42.877900, observed total counts = 43.000000
[Fri Oct 14 15:29:05 2011] Offset between fit and detection position for source 38 = 0.018932 pixels
[Fri Oct 14 15:29:05 2011] 42.540670 total counts/ 8.565270 bgd. counts: snr = 11.608980
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.018932 pixels
  Position = (565.9, 34.8) = 3 33 20.65 -27 41 4.5
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 34.0 +/- 6.5
  Background counts = 8.6
  Rate = 0.0004 +/- 8e-05
[Fri Oct 14 15:29:05 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 15:29:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 15:29:05 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 15:29:05 2011] Source does appear to be extended
[Fri Oct 14 15:29:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 15:44:45 2011] Writing source region out to fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src38_src.reg
[Fri Oct 14 15:44:45 2011] Extracting stamp from image fullrun_ccd3_acisf05016_pi14-548_cl_sm2.00.img.gz, (541, 10) - (591, 60)
[Fri Oct 14 15:44:45 2011] Writing fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src38.gif
[Fri Oct 14 15:46:18 2011] Size of ../../acisf05016/products/events/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src38_src.evt.gz[events] = 36 counts
[Fri Oct 14 15:46:18 2011] Mean chipx,y = (550.00, 1001.03)
[Fri Oct 14 15:46:18 2011] Mean tdetx,y = (4130.97, 3611.00)
[Fri Oct 14 15:46:18 2011] chipx,y range = (536.00-569.00, 985.00-1019.00)
[Fri Oct 14 15:46:18 2011] Size of ../../acisf05016/products/events/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src38_bgd.evt.gz[events] = 11 counts
[Fri Oct 14 15:46:19 2011] Not generating rmf since there are only 33 counts
[Fri Oct 14 15:46:19 2011] arf not found, will run specextract
[Fri Oct 14 15:46:21 2011] ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src38_bkg.pi not found
[Fri Oct 14 15:46:21 2011] ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src38.warf not found
[Fri Oct 14 15:46:21 2011] ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src38.wrmf not found
[Fri Oct 14 15:46:21 2011] Removal of ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src38.soff failed
[Fri Oct 14 15:46:21 2011] Failed to rename ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src38_grp.pi to ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src38_src.pi
[Fri Oct 14 15:51:14 2011] No arf file found
[Fri Oct 14 15:51:20 2011] Updating aperture counts using extracted products
[Fri Oct 14 15:51:20 2011] Error reading totcts from fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src38_src.pi
[Fri Oct 14 15:51:20 2011] No arf file for this source, not re-computing flux
[Fri Oct 14 15:51:28 2011] Source 38 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 15:51:29 2011] acisf05016/analysis//spectral/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete