[Fri Oct 14 11:22:09 2011] Detection parameters:
  Position = (353.0, 922.0) = 3 33 28.50 -27 33 47.7
  Extent = 4.8" x 2.6", rotation angle = 48 degrees
  Source counts = 24.2 +/- 6.4
  Background counts = 16.8
  Rate = 0.0003 +/- 8e-05

[Fri Oct 14 11:22:10 2011] Off-axis axis estimate = 8.93'
[Fri Oct 14 13:05:22 2011] Using EEF radius (= 3.52 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 13:05:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 13:05:22 2011] Initial guess for spatial extent in simple fitting = 3.52"
[Fri Oct 14 13:05:22 2011] source mask rpix=7.2, npix_max = 234, mask sum = 256, frac = 1.090
[Fri Oct 14 13:05:22 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 3.52"
[Fri Oct 14 13:36:10 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src12.ximg exists
[Fri Oct 14 13:36:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src12.csv
[Fri Oct 14 13:36:10 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src12_1.ximg exists
[Fri Oct 14 13:36:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src12.csv
[Fri Oct 14 13:36:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 13:36:10 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Fri Oct 14 13:36:10 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Oct 14 13:36:10 2011] Fit fullrun_ccd3_acisf05016_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Oct 14 13:36:29 2011] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 39.510334 pixels away
[Fri Oct 14 13:36:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 13:36:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 13:36:29 2011] Assessing source extent using major
[Fri Oct 14 13:36:29 2011] Source does appear to be extended
[Fri Oct 14 13:36:29 2011] Computing asymmetry using major and minor axis, asym = 1.84
[Fri Oct 14 13:36:29 2011] Source is asymmetric
[Fri Oct 14 15:00:20 2011] Using EEF radius (= 3.52 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 15:00:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 15:00:20 2011] Initial guess for spatial extent in simple fitting = 3.52"
[Fri Oct 14 15:00:20 2011] source mask rpix=7.2, npix_max = 234, mask sum = 256, frac = 1.090
[Fri Oct 14 15:00:20 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 3.52"
[Fri Oct 14 15:28:48 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src12.ximg exists
[Fri Oct 14 15:28:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src12.csv
[Fri Oct 14 15:28:48 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src12_1.ximg exists
[Fri Oct 14 15:28:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src12.csv
[Fri Oct 14 15:28:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 15:28:49 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Fri Oct 14 15:28:49 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Oct 14 15:28:49 2011] Fit fullrun_ccd3_acisf05016_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Oct 14 15:29:05 2011] Spatial fit model total counts = 41.848300, observed total counts = 42.000000
[Fri Oct 14 15:29:05 2011] Offset between fit and detection position for source 34 = 5.627936 pixels
[Fri Oct 14 15:29:05 2011] 42.374600 total counts/ 11.349400 bgd. counts: snr = 9.209332
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 5.627936 pixels
  Position = (348.3, 918.9) = 3 33 28.69 -27 33 49.4
  Extent = 3.8 (2.1-6.1)", rotation angle = 0
  Source counts = 31.0 +/- 6.5
  Background counts = 11.3
  Rate = 0.0004 +/- 8e-05
[Fri Oct 14 15:29:05 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 15:29:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 15:29:05 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 15:29:05 2011] Source does appear to be extended
[Fri Oct 14 15:29:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 15:44:45 2011] Writing source region out to fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src34_src.reg
[Fri Oct 14 15:44:45 2011] Extracting stamp from image fullrun_ccd3_acisf05016_pi14-548_cl_sm2.00.img.gz, (172, 743) - (524, 1055)
[Fri Oct 14 15:44:45 2011] Writing fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src34.gif
[Fri Oct 14 15:47:04 2011] Size of ../../acisf05016/products/events/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src34_src.evt.gz[events] = 54 counts
[Fri Oct 14 15:47:04 2011] Mean chipx,y = (334.00, 115.54)
[Fri Oct 14 15:47:04 2011] Mean tdetx,y = (5016.46, 3395.00)
[Fri Oct 14 15:47:04 2011] chipx,y range = (296.00-367.00, 87.00-152.00)
[Fri Oct 14 15:47:04 2011] Size of ../../acisf05016/products/events/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src34_bgd.evt.gz[events] = 565 counts
[Fri Oct 14 15:47:06 2011] Not generating rmf since there are only 31 counts
[Fri Oct 14 15:47:06 2011] arf not found, will run specextract
[Fri Oct 14 15:47:07 2011] ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src34_bkg.pi not found
[Fri Oct 14 15:47:07 2011] ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src34.warf not found
[Fri Oct 14 15:47:07 2011] ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src34.wrmf not found
[Fri Oct 14 15:47:07 2011] Removal of ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src34.soff failed
[Fri Oct 14 15:47:07 2011] Failed to rename ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src34_grp.pi to ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src34_src.pi
[Fri Oct 14 15:51:14 2011] No arf file found
[Fri Oct 14 15:51:20 2011] Updating aperture counts using extracted products
[Fri Oct 14 15:51:20 2011] Error reading totcts from fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src34_src.pi
[Fri Oct 14 15:51:20 2011] No arf file for this source, not re-computing flux
[Fri Oct 14 15:51:28 2011] Source 34 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 15:51:29 2011] acisf05016/analysis//spectral/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete