[Fri Oct 14 11:22:08 2011] Detection parameters:
  Position = (973.4, 442.7) = 3 33 5.54 -27 37 43.6
  Extent = 0.8" x 0.5", rotation angle = 33 degrees
  Source counts = 20.3 +/- 4.7
  Background counts = 1.7
  Rate = 0.0003 +/- 6e-05

[Fri Oct 14 11:22:10 2011] Off-axis axis estimate = 3.42'
[Fri Oct 14 13:05:22 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 13:05:22 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Fri Oct 14 13:05:22 2011] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.861
[Fri Oct 14 13:05:22 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.67"
[Fri Oct 14 13:36:10 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src15.ximg exists
[Fri Oct 14 13:36:10 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src15.csv
[Fri Oct 14 13:36:10 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src15_1.ximg exists
[Fri Oct 14 13:36:10 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src15.csv
[Fri Oct 14 13:36:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05016_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 13:36:10 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Fri Oct 14 13:36:10 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Oct 14 13:36:10 2011] Fit fullrun_ccd3_acisf05016_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Oct 14 13:36:29 2011] Spatial fit model total counts = 22.650400, observed total counts = 22.000000
[Fri Oct 14 13:36:29 2011] Offset between fit and detection position for source 15 = 0.663185 pixels
[Fri Oct 14 13:36:29 2011] 22.832980 total counts/ 2.853680 bgd. counts: snr = 11.827083
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.663185 pixels
  Position = (974.0, 443.1) = 3 33 5.54 -27 37 43.7
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 20.0 +/- 4.8
  Background counts = 2.9
  Rate = 0.0003 +/- 6e-05
[Fri Oct 14 13:36:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 13:36:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 13:36:29 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 13:36:29 2011] Source does appear to be extended
[Fri Oct 14 13:36:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 15:00:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 15:00:20 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Oct 14 15:00:20 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.419
[Fri Oct 14 15:00:20 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.58"
[Fri Oct 14 15:28:48 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src15.ximg exists
[Fri Oct 14 15:28:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src15.csv
[Fri Oct 14 15:28:48 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src15_1.ximg exists
[Fri Oct 14 15:28:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src15.csv
[Fri Oct 14 15:28:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05016_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 15:28:49 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Fri Oct 14 15:28:49 2011] fullrun_ccd3_acisf05016_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Oct 14 15:28:49 2011] Fit fullrun_ccd3_acisf05016_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Oct 14 15:29:05 2011] Spatial fit model total counts = 23.992800, observed total counts = 24.000000
[Fri Oct 14 15:29:05 2011] Offset between fit and detection position for source 15 = 0.049475 pixels
[Fri Oct 14 15:29:05 2011] 24.401470 total counts/ 5.925870 bgd. counts: snr = 7.589663
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.049475 pixels
  Position = (973.9, 443.1) = 3 33 5.54 -27 37 43.7
  Extent = 0.6 (0.3-0.8)", rotation angle = 0
  Source counts = 18.5 +/- 4.9
  Background counts = 5.9
  Rate = 0.0002 +/- 6e-05
[Fri Oct 14 15:29:05 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 15:29:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 15:29:05 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 15:29:05 2011] Source does appear to be extended
[Fri Oct 14 15:29:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 15:44:45 2011] Writing source region out to fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src15_src.reg
[Fri Oct 14 15:44:45 2011] Extracting stamp from image fullrun_ccd3_acisf05016_pi14-548_cl_sm2.00.img.gz, (948, 417) - (1000, 469)
[Fri Oct 14 15:44:45 2011] Writing fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src15.gif
[Fri Oct 14 15:47:39 2011] Size of ../../acisf05016/products/events/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src15_src.evt.gz[events] = 20 counts
[Fri Oct 14 15:47:39 2011] Mean chipx,y = (959.40, 591.80)
[Fri Oct 14 15:47:39 2011] Mean tdetx,y = (4540.20, 4020.40)
[Fri Oct 14 15:47:39 2011] chipx,y range = (945.00-979.00, 577.00-609.00)
[Fri Oct 14 15:47:39 2011] Size of ../../acisf05016/products/events/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 17 counts
[Fri Oct 14 15:47:41 2011] Not generating rmf since there are only 18 counts
[Fri Oct 14 15:47:41 2011] arf not found, will run specextract
[Fri Oct 14 15:47:42 2011] ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src15_bkg.pi not found
[Fri Oct 14 15:47:42 2011] ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src15.warf not found
[Fri Oct 14 15:47:42 2011] ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src15.wrmf not found
[Fri Oct 14 15:47:42 2011] Removal of ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src15.soff failed
[Fri Oct 14 15:47:42 2011] Failed to rename ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src15_grp.pi to ../../acisf05016/products/spectra/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src15_src.pi
[Fri Oct 14 15:51:14 2011] No arf file found
[Fri Oct 14 15:51:20 2011] Updating aperture counts using extracted products
[Fri Oct 14 15:51:20 2011] Error reading totcts from fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src15_src.pi
[Fri Oct 14 15:51:20 2011] No arf file for this source, not re-computing flux
[Fri Oct 14 15:51:28 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 15:51:29 2011] acisf05016/analysis//spectral/fullrun_ccd3_acisf05016_pi14-548_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete