[Fri Oct 14 11:21:57 2011] Detection parameters:
  Position = (108.5, 765.6) = 3 32 59.05 -27 43 39.9
  Extent = 0.5" x 0.5", rotation angle = 147 degrees
  Source counts = 66.5 +/- 8.2
  Background counts = 1.5
  Rate = 0.0009 +/- 0.0001

[Fri Oct 14 11:21:59 2011] Off-axis axis estimate = 2.91'
[Fri Oct 14 11:24:09 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 11:24:09 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Oct 14 11:24:09 2011] source mask rpix=1.1, npix_max = 10, mask sum = 6, frac = 0.556
[Fri Oct 14 11:24:09 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.56"
[Fri Oct 14 11:53:30 2011] fullrun_ccd0_acisf05016_pi14-548_cl_pass0_src10.ximg exists
[Fri Oct 14 11:53:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05016_pi14-548_cl_pass0_src10.csv
[Fri Oct 14 11:53:30 2011] fullrun_ccd0_acisf05016_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Oct 14 11:53:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05016_pi14-548_cl_pass0_src10.csv
[Fri Oct 14 11:53:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05016_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05016_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 11:53:31 2011] fullrun_ccd0_acisf05016_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Oct 14 11:53:31 2011] fullrun_ccd0_acisf05016_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Oct 14 11:53:31 2011] Fit fullrun_ccd0_acisf05016_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Oct 14 13:36:19 2011] Spatial fit model total counts = 87.000000, observed total counts = 87.000000
[Fri Oct 14 13:36:19 2011] Offset between fit and detection position for source 10 = 0.921818 pixels
[Fri Oct 14 13:36:19 2011] 86.798400 total counts/ 11.043100 bgd. counts: snr = 22.796466
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.921818 pixels
  Position = (109.0, 766.3) = 3 32 59.05 -27 43 39.7
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 75.8 +/- 9.3
  Background counts = 11.0
  Rate = 0.001 +/- 0.0001
[Fri Oct 14 13:36:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 13:36:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 13:36:19 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 13:36:19 2011] Source does appear to be extended
[Fri Oct 14 13:36:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 13:36:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 13:36:57 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Fri Oct 14 13:36:57 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.842
[Fri Oct 14 13:36:57 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.68"
[Fri Oct 14 14:04:56 2011] fullrun_ccd0_acisf05016_pi14-548_cl_pass1_src10.ximg exists
[Fri Oct 14 14:04:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05016_pi14-548_cl_pass1_src10.csv
[Fri Oct 14 14:04:56 2011] fullrun_ccd0_acisf05016_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Oct 14 14:04:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05016_pi14-548_cl_pass1_src10.csv
[Fri Oct 14 14:04:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05016_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05016_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 14:04:56 2011] fullrun_ccd0_acisf05016_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Oct 14 14:04:56 2011] fullrun_ccd0_acisf05016_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Oct 14 14:04:56 2011] Fit fullrun_ccd0_acisf05016_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Oct 14 15:28:56 2011] Spatial fit model total counts = 85.933000, observed total counts = 86.000000
[Fri Oct 14 15:28:56 2011] Offset between fit and detection position for source 10 = 0.018321 pixels
[Fri Oct 14 15:28:56 2011] 85.501390 total counts/ 9.167890 bgd. counts: snr = 25.210443
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.018321 pixels
  Position = (109.0, 766.4) = 3 32 59.05 -27 43 39.7
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 76.3 +/- 9.2
  Background counts = 9.2
  Rate = 0.001 +/- 0.0001
[Fri Oct 14 15:28:56 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 15:28:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 15:28:56 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 15:28:56 2011] Source does appear to be extended
[Fri Oct 14 15:28:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 15:29:29 2011] Writing source region out to fullrun_ccd0_acisf05016_pi14-548_pass1_cl_src10_src.reg
[Fri Oct 14 15:29:29 2011] Extracting stamp from image fullrun_ccd0_acisf05016_pi14-548_cl_sm2.00.img.gz, (77, 735) - (141, 798)
[Fri Oct 14 15:29:29 2011] Writing fullrun_ccd0_acisf05016_pi14-548_pass1_cl_src10.gif
[Fri Oct 14 15:31:08 2011] Size of ../../acisf05016/products/events/fullrun_ccd0_acisf05016_pi14-548_pass1_cl_src10_src.evt.gz[events] = 81 counts
[Fri Oct 14 15:31:08 2011] Mean chipx,y = (932.81, 752.89)
[Fri Oct 14 15:31:08 2011] Mean tdetx,y = (3813.89, 4199.19)
[Fri Oct 14 15:31:08 2011] chipx,y range = (914.00-952.00, 734.00-772.00)
[Fri Oct 14 15:31:08 2011] Size of ../../acisf05016/products/events/fullrun_ccd0_acisf05016_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 11 counts
[Fri Oct 14 15:31:09 2011] Not generating rmf since there are only 76 counts
[Fri Oct 14 15:31:09 2011] arf not found, will run specextract
[Fri Oct 14 15:31:11 2011] ../../acisf05016/products/spectra/fullrun_ccd0_acisf05016_pi14-548_pass1_cl_src10_bkg.pi not found
[Fri Oct 14 15:31:11 2011] ../../acisf05016/products/spectra/fullrun_ccd0_acisf05016_pi14-548_pass1_cl_src10.warf not found
[Fri Oct 14 15:31:11 2011] ../../acisf05016/products/spectra/fullrun_ccd0_acisf05016_pi14-548_pass1_cl_src10.wrmf not found
[Fri Oct 14 15:31:11 2011] Removal of ../../acisf05016/products/spectra/fullrun_ccd0_acisf05016_pi14-548_pass1_cl_src10.soff failed
[Fri Oct 14 15:31:11 2011] Failed to rename ../../acisf05016/products/spectra/fullrun_ccd0_acisf05016_pi14-548_pass1_cl_src10_grp.pi to ../../acisf05016/products/spectra/fullrun_ccd0_acisf05016_pi14-548_pass1_cl_src10_src.pi
[Fri Oct 14 15:34:19 2011] No arf file found
[Fri Oct 14 15:51:19 2011] Updating aperture counts using extracted products
[Fri Oct 14 15:51:19 2011] Error reading totcts from fullrun_ccd0_acisf05016_pi14-548_pass1_cl_src10_src.pi
[Fri Oct 14 15:51:19 2011] No arf file for this source, not re-computing flux
[Fri Oct 14 15:51:25 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 15:51:26 2011] acisf05016/analysis//spectral/fullrun_ccd0_acisf05016_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete