[Tue Oct 11 10:32:19 2011] Detection parameters:
  Position = (863.9, 910.8) = 3 33 9.74 -27 33 56.7
  Extent = 1.1" x 0.9", rotation angle = 22 degrees
  Source counts = 16.8 +/- 4.8
  Background counts = 6.2
  Rate = 0.0001 +/- 3e-05

[Tue Oct 11 10:32:21 2011] Off-axis axis estimate = 7.26'
[Tue Oct 11 13:17:54 2011] Using EEF radius (= 2.34 ")to estimate initial spatial extent for simple fitting
[Tue Oct 11 13:17:54 2011] Initial guess for spatial extent in simple fitting = 2.34"
[Tue Oct 11 13:17:54 2011] source mask rpix=4.8, npix_max = 110, mask sum = 100, frac = 0.907
[Tue Oct 11 13:17:54 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 2.34"
[Tue Oct 11 14:06:13 2011] fullrun_ccd3_acisf05015_pi14-548_cl_pass0_src32.ximg exists
[Tue Oct 11 14:06:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05015_pi14-548_cl_pass0_src32.csv
[Tue Oct 11 14:06:13 2011] fullrun_ccd3_acisf05015_pi14-548_cl_pass0_src32_1.ximg exists
[Tue Oct 11 14:06:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05015_pi14-548_cl_pass0_src32.csv
[Tue Oct 11 14:06:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05015_pi14-548_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05015_pi14-548_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 11 14:06:13 2011] fullrun_ccd3_acisf05015_pi14-548_cl_pass0_tfrozen_src32.ximg exists
[Tue Oct 11 14:06:13 2011] fullrun_ccd3_acisf05015_pi14-548_cl_pass0_tfrozen_src32_1.ximg exists
[Tue Oct 11 14:06:13 2011] Fit fullrun_ccd3_acisf05015_pi14-548_cl_pass0_tfrozen_src32 appears to have run properly
[Tue Oct 11 14:06:38 2011] Spatial fit model total counts = 41.994600, observed total counts = 42.000000
[Tue Oct 11 14:06:38 2011] Offset between fit and detection position for source 38 = 0.298063 pixels
[Tue Oct 11 14:06:38 2011] 41.839300 total counts/ 26.031100 bgd. counts: snr = 3.098391
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.298063 pixels
  Position = (863.8, 910.6) = 3 33 9.76 -27 33 57.1
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 15.8 +/- 6.5
  Background counts = 26.0
  Rate = 0.0001 +/- 4e-05
[Tue Oct 11 14:06:39 2011] Vigneting correction estimate = 1.000000
[Tue Oct 11 14:06:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 11 14:06:39 2011] Assessing source extent using major axis lower bound
[Tue Oct 11 14:06:39 2011] Source does appear to be extended
[Tue Oct 11 14:06:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 11 16:05:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 11 16:05:01 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Tue Oct 11 16:05:01 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.015
[Tue Oct 11 16:05:01 2011] Giving source the simple spatial ID 32 for pass 1, mean size = 0.73"
[Tue Oct 11 16:50:32 2011] fullrun_ccd3_acisf05015_pi14-548_cl_pass1_src32.ximg exists
[Tue Oct 11 16:50:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05015_pi14-548_cl_pass1_src32.csv
[Tue Oct 11 16:50:32 2011] fullrun_ccd3_acisf05015_pi14-548_cl_pass1_src32_1.ximg exists
[Tue Oct 11 16:50:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05015_pi14-548_cl_pass1_src32.csv
[Tue Oct 11 16:50:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05015_pi14-548_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05015_pi14-548_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 11 16:50:32 2011] fullrun_ccd3_acisf05015_pi14-548_cl_pass1_tfrozen_src32.ximg exists
[Tue Oct 11 16:50:32 2011] fullrun_ccd3_acisf05015_pi14-548_cl_pass1_tfrozen_src32_1.ximg exists
[Tue Oct 11 16:50:32 2011] Fit fullrun_ccd3_acisf05015_pi14-548_cl_pass1_tfrozen_src32 appears to have run properly
[Tue Oct 11 16:50:54 2011] Spatial fit model total counts = 22.920600, observed total counts = 23.000000
[Tue Oct 11 16:50:54 2011] Offset between fit and detection position for source 38 = 0.059938 pixels
[Tue Oct 11 16:50:54 2011] 23.401200 total counts/ 7.109000 bgd. counts: snr = 6.110482
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.059938 pixels
  Position = (863.9, 910.5) = 3 33 9.76 -27 33 57.1
  Extent = 0.7 (0.5-1.1)", rotation angle = 0
  Source counts = 16.3 +/- 4.8
  Background counts = 7.1
  Rate = 0.0001 +/- 3e-05
[Tue Oct 11 16:50:54 2011] Vigneting correction estimate = 1.000000
[Tue Oct 11 16:50:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 11 16:50:54 2011] Assessing source extent using major axis lower bound
[Tue Oct 11 16:50:54 2011] Source does appear to be extended
[Tue Oct 11 16:50:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 11 17:07:45 2011] Writing source region out to fullrun_ccd3_acisf05015_pi14-548_pass1_cl_src38_src.reg
[Tue Oct 11 17:07:45 2011] Extracting stamp from image fullrun_ccd3_acisf05015_pi14-548_cl_sm2.00.img.gz, (831, 877) - (897, 944)
[Tue Oct 11 17:07:45 2011] Writing fullrun_ccd3_acisf05015_pi14-548_pass1_cl_src38.gif
[Tue Oct 11 17:14:32 2011] Size of ../../acisf05015/products/events/fullrun_ccd3_acisf05015_pi14-548_pass1_cl_src38_src.evt.gz[events] = 18 counts
[Tue Oct 11 17:14:32 2011] Mean chipx,y = (837.72, 123.61)
[Tue Oct 11 17:14:32 2011] Mean tdetx,y = (5008.39, 3898.72)
[Tue Oct 11 17:14:32 2011] chipx,y range = (830.00-862.00, 111.00-147.00)
[Tue Oct 11 17:14:32 2011] Size of ../../acisf05015/products/events/fullrun_ccd3_acisf05015_pi14-548_pass1_cl_src38_bgd.evt.gz[events] = 39 counts
[Tue Oct 11 17:14:33 2011] Not generating rmf since there are only 16 counts
[Tue Oct 11 17:14:33 2011] arf not found, will run specextract
[Tue Oct 11 17:14:35 2011] ../../acisf05015/products/spectra/fullrun_ccd3_acisf05015_pi14-548_pass1_cl_src38_bkg.pi not found
[Tue Oct 11 17:14:35 2011] ../../acisf05015/products/spectra/fullrun_ccd3_acisf05015_pi14-548_pass1_cl_src38.warf not found
[Tue Oct 11 17:14:35 2011] ../../acisf05015/products/spectra/fullrun_ccd3_acisf05015_pi14-548_pass1_cl_src38.wrmf not found
[Tue Oct 11 17:14:35 2011] Removal of ../../acisf05015/products/spectra/fullrun_ccd3_acisf05015_pi14-548_pass1_cl_src38.soff failed
[Tue Oct 11 17:14:35 2011] Failed to rename ../../acisf05015/products/spectra/fullrun_ccd3_acisf05015_pi14-548_pass1_cl_src38_grp.pi to ../../acisf05015/products/spectra/fullrun_ccd3_acisf05015_pi14-548_pass1_cl_src38_src.pi
[Tue Oct 11 17:17:19 2011] No arf file found
[Tue Oct 11 17:17:26 2011] Updating aperture counts using extracted products
[Tue Oct 11 17:17:26 2011] Error reading totcts from fullrun_ccd3_acisf05015_pi14-548_pass1_cl_src38_src.pi
[Tue Oct 11 17:17:26 2011] No arf file for this source, not re-computing flux
[Tue Oct 11 17:17:34 2011] Source 38 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 11 17:17:35 2011] acisf05015/analysis//spectral/fullrun_ccd3_acisf05015_pi14-548_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete