[Tue Oct 11 10:32:12 2011] Detection parameters:
  Position = (513.4, 531.4) = 3 33 22.78 -27 45 36.0
  Extent = 0.9" x 0.7", rotation angle = 105 degrees
  Source counts = 67.7 +/- 8.7
  Background counts = 8.3
  Rate = 0.0004 +/- 5e-05

[Tue Oct 11 10:32:16 2011] Off-axis axis estimate = 5.86'
[Tue Oct 11 12:25:17 2011] Using EEF radius (= 1.56 ")to estimate initial spatial extent for simple fitting
[Tue Oct 11 12:25:17 2011] Initial guess for spatial extent in simple fitting = 1.56"
[Tue Oct 11 12:25:17 2011] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.909
[Tue Oct 11 12:25:17 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 1.56"
[Tue Oct 11 13:17:53 2011] fullrun_ccd2_acisf05015_pi14-548_cl_pass0_src13.ximg exists
[Tue Oct 11 13:17:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05015_pi14-548_cl_pass0_src13.csv
[Tue Oct 11 13:17:53 2011] fullrun_ccd2_acisf05015_pi14-548_cl_pass0_src13_1.ximg exists
[Tue Oct 11 13:17:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05015_pi14-548_cl_pass0_src13.csv
[Tue Oct 11 13:17:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05015_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05015_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 11 13:17:53 2011] fullrun_ccd2_acisf05015_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Tue Oct 11 13:17:53 2011] fullrun_ccd2_acisf05015_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Oct 11 13:17:53 2011] Fit fullrun_ccd2_acisf05015_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Oct 11 14:06:33 2011] Spatial fit model total counts = 82.703000, observed total counts = 83.000000
[Tue Oct 11 14:06:33 2011] Offset between fit and detection position for source 16 = 0.530061 pixels
[Tue Oct 11 14:06:33 2011] 84.193100 total counts/ 23.809700 bgd. counts: snr = 12.374869
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.530061 pixels
  Position = (513.9, 531.4) = 3 33 22.78 -27 45 36.2
  Extent = 1.2 (1.0-1.7)", rotation angle = 0
  Source counts = 60.4 +/- 9.2
  Background counts = 23.8
  Rate = 0.0004 +/- 6e-05
[Tue Oct 11 14:06:33 2011] Vigneting correction estimate = 1.000000
[Tue Oct 11 14:06:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 11 14:06:33 2011] Assessing source extent using major axis lower bound
[Tue Oct 11 14:06:33 2011] Source does appear to be extended
[Tue Oct 11 14:06:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 11 15:27:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 11 15:27:08 2011] Initial guess for spatial extent in simple fitting = 1.21"
[Tue Oct 11 15:27:08 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.022
[Tue Oct 11 15:27:08 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 1.21"
[Tue Oct 11 16:05:00 2011] fullrun_ccd2_acisf05015_pi14-548_cl_pass1_src13.ximg exists
[Tue Oct 11 16:05:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05015_pi14-548_cl_pass1_src13.csv
[Tue Oct 11 16:05:00 2011] fullrun_ccd2_acisf05015_pi14-548_cl_pass1_src13_1.ximg exists
[Tue Oct 11 16:05:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05015_pi14-548_cl_pass1_src13.csv
[Tue Oct 11 16:05:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05015_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05015_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 11 16:05:00 2011] fullrun_ccd2_acisf05015_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Tue Oct 11 16:05:00 2011] fullrun_ccd2_acisf05015_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Oct 11 16:05:00 2011] Fit fullrun_ccd2_acisf05015_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Oct 11 16:50:49 2011] Spatial fit model total counts = 78.998700, observed total counts = 79.000000
[Tue Oct 11 16:50:49 2011] Offset between fit and detection position for source 16 = 0.093662 pixels
[Tue Oct 11 16:50:49 2011] 79.603700 total counts/ 19.663100 bgd. counts: snr = 13.517460
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.093662 pixels
  Position = (514.0, 531.4) = 3 33 22.77 -27 45 36.2
  Extent = 1.2 (1.0-1.6)", rotation angle = 0
  Source counts = 59.9 +/- 8.9
  Background counts = 19.7
  Rate = 0.0004 +/- 5e-05
[Tue Oct 11 16:50:49 2011] Vigneting correction estimate = 1.000000
[Tue Oct 11 16:50:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 11 16:50:49 2011] Assessing source extent using major axis lower bound
[Tue Oct 11 16:50:49 2011] Source does appear to be extended
[Tue Oct 11 16:50:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 11 17:01:54 2011] Writing source region out to fullrun_ccd2_acisf05015_pi14-548_pass1_cl_src16_src.reg
[Tue Oct 11 17:01:54 2011] Extracting stamp from image fullrun_ccd2_acisf05015_pi14-548_cl_sm2.00.img.gz, (459, 476) - (569, 586)
[Tue Oct 11 17:01:54 2011] Writing fullrun_ccd2_acisf05015_pi14-548_pass1_cl_src16.gif
[Tue Oct 11 17:04:13 2011] Size of ../../acisf05015/products/events/fullrun_ccd2_acisf05015_pi14-548_pass1_cl_src16_src.evt.gz[events] = 84 counts
[Tue Oct 11 17:04:13 2011] Mean chipx,y = (524.57, 515.93)
[Tue Oct 11 17:04:13 2011] Mean tdetx,y = (3576.93, 3561.43)
[Tue Oct 11 17:04:13 2011] chipx,y range = (502.00-545.00, 493.00-538.00)
[Tue Oct 11 17:04:13 2011] Size of ../../acisf05015/products/events/fullrun_ccd2_acisf05015_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 115 counts
[Tue Oct 11 17:04:14 2011] Not generating rmf since there are only 59 counts
[Tue Oct 11 17:04:14 2011] arf not found, will run specextract
[Tue Oct 11 17:04:16 2011] ../../acisf05015/products/spectra/fullrun_ccd2_acisf05015_pi14-548_pass1_cl_src16_bkg.pi not found
[Tue Oct 11 17:04:16 2011] ../../acisf05015/products/spectra/fullrun_ccd2_acisf05015_pi14-548_pass1_cl_src16.warf not found
[Tue Oct 11 17:04:16 2011] ../../acisf05015/products/spectra/fullrun_ccd2_acisf05015_pi14-548_pass1_cl_src16.wrmf not found
[Tue Oct 11 17:04:16 2011] Removal of ../../acisf05015/products/spectra/fullrun_ccd2_acisf05015_pi14-548_pass1_cl_src16.soff failed
[Tue Oct 11 17:04:16 2011] Failed to rename ../../acisf05015/products/spectra/fullrun_ccd2_acisf05015_pi14-548_pass1_cl_src16_grp.pi to ../../acisf05015/products/spectra/fullrun_ccd2_acisf05015_pi14-548_pass1_cl_src16_src.pi
[Tue Oct 11 17:07:44 2011] No arf file found
[Tue Oct 11 17:17:25 2011] Updating aperture counts using extracted products
[Tue Oct 11 17:17:25 2011] Error reading totcts from fullrun_ccd2_acisf05015_pi14-548_pass1_cl_src16_src.pi
[Tue Oct 11 17:17:25 2011] No arf file for this source, not re-computing flux
[Tue Oct 11 17:17:33 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 11 17:17:34 2011] acisf05015/analysis//spectral/fullrun_ccd2_acisf05015_pi14-548_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete