[Fri Oct  7 18:51:14 2011] Detection parameters:
  Position = (721.9, 481.1) = 11 15 12.14 53 19 57.4
  Extent = 0.7" x 0.5", rotation angle = 31 degrees
  Source counts = 13.6 +/- 4.1
  Background counts = 3.4
  Rate = 0.0008 +/- 0.0002

[Fri Oct  7 18:51:15 2011] Off-axis axis estimate = 3.27'
[Fri Oct  7 18:52:04 2011] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 18:52:04 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Fri Oct  7 18:52:04 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.238
[Fri Oct  7 18:52:04 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.64"
[Fri Oct  7 18:52:05 2011] fullrun_ccd3_acisf05008_pi14-548_cl_pass0_src11.ximg exists
[Fri Oct  7 18:52:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05008_pi14-548_cl_pass0_src11.csv
[Fri Oct  7 18:52:05 2011] fullrun_ccd3_acisf05008_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Oct  7 18:52:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05008_pi14-548_cl_pass0_src11.csv
[Fri Oct  7 18:52:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05008_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05008_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 18:52:05 2011] fullrun_ccd3_acisf05008_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Oct  7 18:52:05 2011] fullrun_ccd3_acisf05008_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Oct  7 18:52:05 2011] Fit fullrun_ccd3_acisf05008_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Oct  7 18:52:17 2011] Spatial fit model total counts = 28.754300, observed total counts = 29.000000
[Fri Oct  7 18:52:17 2011] Offset between fit and detection position for source 11 = 0.267781 pixels
[Fri Oct  7 18:52:17 2011] 29.602800 total counts/ 16.319600 bgd. counts: snr = 3.288122
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.267781 pixels
  Position = (721.9, 481.4) = 11 15 12.16 53 19 57.3
  Extent = 0.5 (0.2-0.7)", rotation angle = 0
  Source counts = 13.3 +/- 5.4
  Background counts = 16.3
  Rate = 0.0007 +/- 0.0003
[Fri Oct  7 18:52:17 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 18:52:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 18:52:17 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 18:52:17 2011] Source does appear to be extended
[Fri Oct  7 18:52:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 18:52:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 18:52:39 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Fri Oct  7 18:52:39 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.993
[Fri Oct  7 18:52:39 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.49"
[Fri Oct  7 18:52:40 2011] fullrun_ccd3_acisf05008_pi14-548_cl_pass1_src11.ximg exists
[Fri Oct  7 18:52:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05008_pi14-548_cl_pass1_src11.csv
[Fri Oct  7 18:52:40 2011] fullrun_ccd3_acisf05008_pi14-548_cl_pass1_src11_1.ximg exists
[Fri Oct  7 18:52:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05008_pi14-548_cl_pass1_src11.csv
[Fri Oct  7 18:52:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05008_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05008_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 18:52:40 2011] fullrun_ccd3_acisf05008_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri Oct  7 18:52:40 2011] fullrun_ccd3_acisf05008_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Oct  7 18:52:40 2011] Fit fullrun_ccd3_acisf05008_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Oct  7 18:52:55 2011] Spatial fit model total counts = 28.976200, observed total counts = 29.000000
[Fri Oct  7 18:52:55 2011] Offset between fit and detection position for source 11 = 0.017115 pixels
[Fri Oct  7 18:52:55 2011] 29.338500 total counts/ 16.018300 bgd. counts: snr = 3.328147
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.017115 pixels
  Position = (721.9, 481.4) = 11 15 12.16 53 19 57.3
  Extent = 0.5 (0.1-0.7)", rotation angle = 0
  Source counts = 13.3 +/- 5.4
  Background counts = 16.0
  Rate = 0.0007 +/- 0.0003
[Fri Oct  7 18:52:55 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 18:52:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 18:52:55 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 18:52:55 2011] Source does appear to be extended
[Fri Oct  7 18:52:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 18:55:12 2011] Not overwriting source region fullrun_ccd3_acisf05008_pi14-548_pass1_cl_src11_src.reg
[Fri Oct  7 18:55:12 2011] Extracting stamp from image fullrun_ccd3_acisf05008_pi14-548_cl_sm2.00.img.gz, (699, 459) - (744, 504)
[Fri Oct  7 18:55:12 2011] Writing fullrun_ccd3_acisf05008_pi14-548_pass1_cl_src11.gif
[Fri Oct  7 18:55:46 2011] ../../acisf05008/products/events/fullrun_ccd3_acisf05008_pi14-548_pass1_cl_src11_src.evt and ../../acisf05008/products/events/fullrun_ccd3_acisf05008_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Oct  7 18:55:46 2011] Size of ../../acisf05008/products/events/fullrun_ccd3_acisf05008_pi14-548_pass1_cl_src11_src.evt.gz[events] = 15 counts
[Fri Oct  7 18:55:46 2011] Mean chipx,y = (674.20, 604.33)
[Fri Oct  7 18:55:46 2011] Mean tdetx,y = (4527.67, 3735.20)
[Fri Oct  7 18:55:46 2011] chipx,y range = (659.00-691.00, 589.00-620.00)
[Fri Oct  7 18:55:46 2011] Size of ../../acisf05008/products/events/fullrun_ccd3_acisf05008_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 30 counts
[Fri Oct  7 18:55:46 2011] ../../acisf05008/products/images/fullrun_ccd3_acisf05008_pi14-548_pass1_cl_src11_src.img and ../../acisf05008/products/images/fullrun_ccd3_acisf05008_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Oct  7 18:55:46 2011] ../../acisf05008/products/spectra/fullrun_ccd3_acisf05008_pi14-548_pass1_cl_src11_src.pi and ../../acisf05008/products/spectra/fullrun_ccd3_acisf05008_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Oct  7 18:55:46 2011] Not generating rmf since there are only 13 counts
[Fri Oct  7 18:55:49 2011] ../../acisf05008/products/lightcurves/fullrun_ccd3_acisf05008_pi14-548_pass1_cl_src11_src.lc and ../../acisf05008/products/lightcurves/fullrun_ccd3_acisf05008_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Oct  7 18:56:22 2011] 195.365
[Fri Oct  7 18:56:30 2011] Updating aperture counts using extracted products
[Fri Oct  7 18:56:30 2011] Error reading totcts from fullrun_ccd3_acisf05008_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Oct  7 18:56:30 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 18:56:30 2011] Using photon index=1.80, rate=0.000741, arf fullrun_ccd3_acisf05008_pi14-548_pass1_cl_src11.arf
[Fri Oct  7 18:56:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 18:56:30 2011] Updating source flux to 8.8e-15
[Fri Oct  7 18:56:42 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting