[Fri Oct 21 08:42:53 2011] Detection parameters:
  Position = (624.5, 589.1) = 11 54 47.44 23 26 13.3
  Extent = 1.1" x 0.9", rotation angle = 73 degrees
  Source counts = 108.2 +/- 10.6
  Background counts = 3.8
  Rate = 0.003 +/- 0.0003

[Fri Oct 21 08:42:54 2011] Off-axis axis estimate = 5.66'
[Fri Oct 21 08:44:04 2011] Using EEF radius (= 1.47 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 08:44:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 08:44:04 2011] Initial guess for spatial extent in simple fitting = 1.47"
[Fri Oct 21 08:44:04 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.010
[Fri Oct 21 08:44:04 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.47"
[Fri Oct 21 08:44:05 2011] fullrun_ccd3_acisf05002_pi14-548_cl_pass0_src2.ximg exists
[Fri Oct 21 08:44:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05002_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 08:44:05 2011] fullrun_ccd3_acisf05002_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Oct 21 08:44:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05002_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 08:44:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05002_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05002_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 08:44:05 2011] fullrun_ccd3_acisf05002_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 21 08:44:05 2011] fullrun_ccd3_acisf05002_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 21 08:44:05 2011] Fit fullrun_ccd3_acisf05002_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 21 08:44:20 2011] Spatial fit model total counts = 106.306000, observed total counts = 112.000000
[Fri Oct 21 08:44:20 2011] Offset between fit and detection position for source 20 = 0.183334 pixels
[Fri Oct 21 08:44:20 2011] 109.623540 total counts/ 6.655540 bgd. counts: snr = 39.912656
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.183334 pixels
  Position = (624.7, 588.9) = 11 54 47.45 23 26 13.0
  Extent = 1.2 (1.0-1.4)", rotation angle = 0
  Source counts = 103.0 +/- 10.5
  Background counts = 6.7
  Rate = 0.003 +/- 0.0003
[Fri Oct 21 08:44:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 08:44:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 08:44:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 08:44:20 2011] Source does appear to be extended
[Fri Oct 21 08:44:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 08:44:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 08:44:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 08:44:42 2011] Initial guess for spatial extent in simple fitting = 1.19"
[Fri Oct 21 08:44:42 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.057
[Fri Oct 21 08:44:42 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.19"
[Fri Oct 21 08:44:43 2011] fullrun_ccd3_acisf05002_pi14-548_cl_pass1_src2.ximg exists
[Fri Oct 21 08:44:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05002_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 08:44:43 2011] fullrun_ccd3_acisf05002_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Oct 21 08:44:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05002_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 08:44:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05002_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05002_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 08:44:43 2011] fullrun_ccd3_acisf05002_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 21 08:44:43 2011] fullrun_ccd3_acisf05002_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 21 08:44:43 2011] Fit fullrun_ccd3_acisf05002_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct 21 08:44:59 2011] Spatial fit model total counts = 105.159000, observed total counts = 110.000000
[Fri Oct 21 08:44:59 2011] Offset between fit and detection position for source 20 = 0.150660 pixels
[Fri Oct 21 08:44:59 2011] 108.813230 total counts/ 1.981230 bgd. counts: snr = 75.898626
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.150660 pixels
  Position = (624.6, 588.8) = 11 54 47.45 23 26 12.9
  Extent = 1.2 (1.0-1.4)", rotation angle = 0
  Source counts = 106.8 +/- 10.4
  Background counts = 2.0
  Rate = 0.003 +/- 0.0003
[Fri Oct 21 08:44:59 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 08:44:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 08:44:59 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 08:44:59 2011] Source does appear to be extended
[Fri Oct 21 08:44:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 08:48:18 2011] Not overwriting source region fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20_src.reg
[Fri Oct 21 08:48:18 2011] Extracting stamp from image fullrun_ccd3_acisf05002_pi14-548_cl_sm2.00.img.gz, (569, 533) - (681, 645)
[Fri Oct 21 08:48:18 2011] Writing fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20.gif
[Fri Oct 21 08:48:23 2011] ../../acisf05002/products/events/fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20_src.evt and ../../acisf05002/products/events/fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Fri Oct 21 08:48:23 2011] Size of ../../acisf05002/products/events/fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20_src.evt.gz[events] = 111 counts
[Fri Oct 21 08:48:23 2011] Mean chipx,y = (431.64, 567.18)
[Fri Oct 21 08:48:23 2011] Mean tdetx,y = (4564.82, 3492.64)
[Fri Oct 21 08:48:23 2011] chipx,y range = (410.00-453.00, 544.00-589.00)
[Fri Oct 21 08:48:23 2011] Size of ../../acisf05002/products/events/fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 37 counts
[Fri Oct 21 08:48:23 2011] ../../acisf05002/products/images/fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20_src.img and ../../acisf05002/products/images/fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Fri Oct 21 08:48:23 2011] ../../acisf05002/products/spectra/fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20_src.pi and ../../acisf05002/products/spectra/fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Fri Oct 21 08:48:25 2011] ../../acisf05002/products/lightcurves/fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20_src.lc and ../../acisf05002/products/lightcurves/fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Fri Oct 21 08:49:47 2011] Keeping rmf generated by specextract
[Fri Oct 21 08:49:47 2011] 179.875
[Fri Oct 21 08:49:56 2011] Updating aperture counts using extracted products
[Fri Oct 21 08:49:56 2011] Error reading totcts from fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20_src.pi.gz
[Fri Oct 21 08:49:56 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 08:49:56 2011] Using photon index=1.80, rate=0.00291, arf fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20.arf
[Fri Oct 21 08:49:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 08:49:56 2011] Updating source flux to 3.7e-14
[Fri Oct 21 08:50:32 2011] Reading fit data from acisf05002/analysis//spectral/fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20_pl.csv
[Fri Oct 21 08:50:32 2011] Spectral fit parameter nH value = 3.77845e+21
[Fri Oct 21 08:50:32 2011] Spectral fit parameter PhoIndex value = 5.98766
[Fri Oct 21 08:50:32 2011] Failed to get F(0.3-8.0) from acisf05002/analysis//spectral/fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 08:50:32 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 08:50:32 2011] Using Nh = 3.8e+21, photon index=5.99, rate=0.00291, arf fullrun_ccd3_acisf05002_pi14-548_pass1_cl_src20.arf
[Fri Oct 21 08:50:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 08:50:32 2011] Updating source flux to 3.2e-14