[Thu Oct 20 07:08:40 2011] Detection parameters:
  Position = (138.6, 222.8) = 14 4 0.36 -33 59 11.1
  Extent = 0.7" x 0.6", rotation angle = 43 degrees
  Source counts = 11.3 +/- 3.5
  Background counts = 0.7
  Rate = 0.0008 +/- 0.0002

[Thu Oct 20 07:08:40 2011] Off-axis axis estimate = 4.76'
[Thu Oct 20 07:09:13 2011] Using EEF radius (= 1.09 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 07:09:13 2011] Initial guess for spatial extent in simple fitting = 1.09"
[Thu Oct 20 07:09:13 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.849
[Thu Oct 20 07:09:13 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.09"
[Thu Oct 20 07:09:14 2011] fullrun_ccd3_acisf05000_pi14-548_cl_pass0_src10.ximg exists
[Thu Oct 20 07:09:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05000_pi14-548_cl_pass0_src10.csv
[Thu Oct 20 07:09:14 2011] fullrun_ccd3_acisf05000_pi14-548_cl_pass0_src10_1.ximg exists
[Thu Oct 20 07:09:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05000_pi14-548_cl_pass0_src10.csv
[Thu Oct 20 07:09:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05000_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05000_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 07:09:14 2011] fullrun_ccd3_acisf05000_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Thu Oct 20 07:09:14 2011] fullrun_ccd3_acisf05000_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Oct 20 07:09:14 2011] Fit fullrun_ccd3_acisf05000_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Oct 20 07:09:22 2011] Spatial fit model total counts = 13.014500, observed total counts = 14.000000
[Thu Oct 20 07:09:22 2011] Offset between fit and detection position for source 8 = 0.859486 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.859486 pixels
  Position = (139.2, 223.4) = 14 4 0.36 -33 59 11.1
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 12.2 +/- 3.5
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Thu Oct 20 07:09:22 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 07:09:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 07:09:22 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 07:09:22 2011] Source does appear to be extended
[Thu Oct 20 07:09:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 07:09:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 07:09:38 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Thu Oct 20 07:09:38 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.959
[Thu Oct 20 07:09:38 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.88"
[Thu Oct 20 07:09:39 2011] fullrun_ccd3_acisf05000_pi14-548_cl_pass1_src10.ximg exists
[Thu Oct 20 07:09:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05000_pi14-548_cl_pass1_src10.csv
[Thu Oct 20 07:09:39 2011] fullrun_ccd3_acisf05000_pi14-548_cl_pass1_src10_1.ximg exists
[Thu Oct 20 07:09:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05000_pi14-548_cl_pass1_src10.csv
[Thu Oct 20 07:09:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05000_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05000_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 07:09:39 2011] fullrun_ccd3_acisf05000_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Thu Oct 20 07:09:39 2011] fullrun_ccd3_acisf05000_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Oct 20 07:09:39 2011] Fit fullrun_ccd3_acisf05000_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Oct 20 07:09:46 2011] Spatial fit model total counts = 12.397500, observed total counts = 13.000000
[Thu Oct 20 07:09:46 2011] Offset between fit and detection position for source 8 = 0.125954 pixels
[Thu Oct 20 07:09:46 2011] 12.133500 total counts/ 0.000000 bgd. counts: snr = 563381954033562.375000
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.125954 pixels
  Position = (139.1, 223.3) = 14 4 0.36 -33 59 11.1
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 12.1 +/- 3.5
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Thu Oct 20 07:09:46 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 07:09:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 07:09:46 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 07:09:46 2011] Source does appear to be extended
[Thu Oct 20 07:09:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 07:11:28 2011] Not overwriting source region fullrun_ccd3_acisf05000_pi14-548_pass1_cl_src8_src.reg
[Thu Oct 20 07:11:28 2011] Extracting stamp from image fullrun_ccd3_acisf05000_pi14-548_cl_sm2.00.img.gz, (100, 184) - (178, 262)
[Thu Oct 20 07:11:28 2011] Writing fullrun_ccd3_acisf05000_pi14-548_pass1_cl_src8.gif
[Thu Oct 20 07:11:55 2011] ../../acisf05000/products/events/fullrun_ccd3_acisf05000_pi14-548_pass1_cl_src8_src.evt and ../../acisf05000/products/events/fullrun_ccd3_acisf05000_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Thu Oct 20 07:11:55 2011] Size of ../../acisf05000/products/events/fullrun_ccd3_acisf05000_pi14-548_pass1_cl_src8_src.evt.gz[events] = 12 counts
[Thu Oct 20 07:11:55 2011] Mean chipx,y = (84.50, 806.25)
[Thu Oct 20 07:11:55 2011] Mean tdetx,y = (4325.75, 3145.50)
[Thu Oct 20 07:11:55 2011] chipx,y range = (66.00-98.00, 791.00-828.00)
[Thu Oct 20 07:11:55 2011] Size of ../../acisf05000/products/events/fullrun_ccd3_acisf05000_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 8 counts
[Thu Oct 20 07:11:55 2011] ../../acisf05000/products/images/fullrun_ccd3_acisf05000_pi14-548_pass1_cl_src8_src.img and ../../acisf05000/products/images/fullrun_ccd3_acisf05000_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Thu Oct 20 07:11:55 2011] ../../acisf05000/products/spectra/fullrun_ccd3_acisf05000_pi14-548_pass1_cl_src8_src.pi and ../../acisf05000/products/spectra/fullrun_ccd3_acisf05000_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Thu Oct 20 07:11:55 2011] Not generating rmf since there are only 12 counts
[Thu Oct 20 07:11:57 2011] ../../acisf05000/products/lightcurves/fullrun_ccd3_acisf05000_pi14-548_pass1_cl_src8_src.lc and ../../acisf05000/products/lightcurves/fullrun_ccd3_acisf05000_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Thu Oct 20 07:12:01 2011] 183.132
[Thu Oct 20 07:12:08 2011] Updating aperture counts using extracted products
[Thu Oct 20 07:12:08 2011] Error reading totcts from fullrun_ccd3_acisf05000_pi14-548_pass1_cl_src8_src.pi.gz
[Thu Oct 20 07:12:08 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 07:12:08 2011] Using photon index=1.80, rate=0.000819, arf fullrun_ccd3_acisf05000_pi14-548_pass1_cl_src8.arf
[Thu Oct 20 07:12:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 07:12:08 2011] Updating source flux to 1e-14
[Thu Oct 20 07:12:17 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting