[Thu Oct  6 12:06:07 2011] Detection parameters:
  Position = (600.5, 304.5) = 8 53 30.21 23 20 40.7
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 14.0 +/- 4.0
  Background counts = 2.0
  Rate = 0.0003 +/- 9e-05

[Thu Oct  6 12:06:07 2011] Off-axis axis estimate = 4.59'
[Thu Oct  6 12:07:14 2011] Using EEF radius (= 1.02 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 12:07:14 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Thu Oct  6 12:07:14 2011] source mask rpix=2.1, npix_max = 26, mask sum = 15, frac = 0.562
[Thu Oct  6 12:07:14 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 1.02"
[Thu Oct  6 12:07:15 2011] fullrun_ccd7_acisf04979_pi14-548_cl_pass0_src27.ximg exists
[Thu Oct  6 12:07:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04979_pi14-548_cl_pass0_src27.csv
[Thu Oct  6 12:07:15 2011] fullrun_ccd7_acisf04979_pi14-548_cl_pass0_src27_1.ximg exists
[Thu Oct  6 12:07:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04979_pi14-548_cl_pass0_src27.csv
[Thu Oct  6 12:07:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04979_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04979_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 12:07:16 2011] fullrun_ccd7_acisf04979_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Thu Oct  6 12:07:16 2011] fullrun_ccd7_acisf04979_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Oct  6 12:07:16 2011] Fit fullrun_ccd7_acisf04979_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Thu Oct  6 12:07:32 2011] Spatial fit model total counts = 42.066500, observed total counts = 39.000000
[Thu Oct  6 12:07:32 2011] Offset between fit and detection position for source 36 = 1.182051 pixels
[Thu Oct  6 12:07:32 2011] 42.197500 total counts/ 10.248000 bgd. counts: snr = 9.980321
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 1.182051 pixels
  Position = (599.6, 303.7) = 8 53 30.26 23 20 40.1
  Extent = 1.0 (0.5-1.5)", rotation angle = 0
  Source counts = 31.9 +/- 6.5
  Background counts = 10.2
  Rate = 0.0007 +/- 0.0001
[Thu Oct  6 12:07:32 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 12:07:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 12:07:32 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 12:07:32 2011] Source does appear to be extended
[Thu Oct  6 12:07:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 12:08:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 12:08:00 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Thu Oct  6 12:08:00 2011] source mask rpix=2.1, npix_max = 26, mask sum = 15, frac = 0.564
[Thu Oct  6 12:08:00 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 1.02"
[Thu Oct  6 12:08:02 2011] fullrun_ccd7_acisf04979_pi14-548_cl_pass1_src26.ximg exists
[Thu Oct  6 12:08:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04979_pi14-548_cl_pass1_src26.csv
[Thu Oct  6 12:08:02 2011] fullrun_ccd7_acisf04979_pi14-548_cl_pass1_src26_1.ximg exists
[Thu Oct  6 12:08:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04979_pi14-548_cl_pass1_src26.csv
[Thu Oct  6 12:08:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04979_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04979_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 12:08:02 2011] fullrun_ccd7_acisf04979_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Thu Oct  6 12:08:02 2011] fullrun_ccd7_acisf04979_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Thu Oct  6 12:08:02 2011] Fit fullrun_ccd7_acisf04979_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Thu Oct  6 12:08:13 2011] Spatial fit model total counts = 43.914700, observed total counts = 40.000000
[Thu Oct  6 12:08:13 2011] Offset between fit and detection position for source 36 = 0.198867 pixels
[Thu Oct  6 12:08:13 2011] 44.127600 total counts/ 13.917900 bgd. counts: snr = 8.097660
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.198867 pixels
  Position = (599.4, 303.7) = 8 53 30.27 23 20 40.1
  Extent = 0.9 (0.5-1.6)", rotation angle = 0
  Source counts = 30.2 +/- 6.6
  Background counts = 13.9
  Rate = 0.0006 +/- 0.0001
[Thu Oct  6 12:08:13 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 12:08:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 12:08:13 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 12:08:13 2011] Source does appear to be extended
[Thu Oct  6 12:08:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 12:10:48 2011] Not overwriting source region fullrun_ccd7_acisf04979_pi14-548_pass1_cl_src36_src.reg
[Thu Oct  6 12:10:48 2011] Extracting stamp from image fullrun_ccd7_acisf04979_pi14-548_cl_sm2.00.img.gz, (557, 261) - (642, 346)
[Thu Oct  6 12:10:48 2011] Writing fullrun_ccd7_acisf04979_pi14-548_pass1_cl_src36.gif
[Thu Oct  6 12:12:26 2011] ../../acisf04979/products/events/fullrun_ccd7_acisf04979_pi14-548_pass1_cl_src36_src.evt and ../../acisf04979/products/events/fullrun_ccd7_acisf04979_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Thu Oct  6 12:12:26 2011] Size of ../../acisf04979/products/events/fullrun_ccd7_acisf04979_pi14-548_pass1_cl_src36_src.evt.gz[events] = 36 counts
[Thu Oct  6 12:12:26 2011] Mean chipx,y = (769.94, 481.22)
[Thu Oct  6 12:12:26 2011] Mean tdetx,y = (4686.94, 2183.22)
[Thu Oct  6 12:12:26 2011] chipx,y range = (748.00-785.00, 466.00-503.00)
[Thu Oct  6 12:12:26 2011] Size of ../../acisf04979/products/events/fullrun_ccd7_acisf04979_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 48 counts
[Thu Oct  6 12:12:26 2011] ../../acisf04979/products/images/fullrun_ccd7_acisf04979_pi14-548_pass1_cl_src36_src.img and ../../acisf04979/products/images/fullrun_ccd7_acisf04979_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Thu Oct  6 12:12:26 2011] ../../acisf04979/products/spectra/fullrun_ccd7_acisf04979_pi14-548_pass1_cl_src36_src.pi and ../../acisf04979/products/spectra/fullrun_ccd7_acisf04979_pi14-548_pass1_cl_src36_bgd.pi exist, delete to re-create
[Thu Oct  6 12:12:26 2011] Not generating rmf since there are only 30 counts
[Thu Oct  6 12:12:29 2011] ../../acisf04979/products/lightcurves/fullrun_ccd7_acisf04979_pi14-548_pass1_cl_src36_src.lc and ../../acisf04979/products/lightcurves/fullrun_ccd7_acisf04979_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Thu Oct  6 12:12:59 2011] 222.438
[Thu Oct  6 12:13:03 2011] Updating aperture counts using extracted products
[Thu Oct  6 12:13:03 2011] Error reading totcts from fullrun_ccd7_acisf04979_pi14-548_pass1_cl_src36_src.pi.gz
[Thu Oct  6 12:13:03 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 12:13:03 2011] Using photon index=1.80, rate=0.000649, arf fullrun_ccd7_acisf04979_pi14-548_pass1_cl_src36.arf
[Thu Oct  6 12:13:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 12:13:03 2011] Updating source flux to 4.7e-15
[Thu Oct  6 12:13:22 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting