[Thu Oct  6 12:06:06 2011] Detection parameters:
  Position = (554.2, 709.2) = 8 53 31.86 23 23 59.9
  Extent = 0.5" x 0.5", rotation angle = 51 degrees
  Source counts = 18.9 +/- 4.6
  Background counts = 2.1
  Rate = 0.0004 +/- 0.0001

[Thu Oct  6 12:06:07 2011] Off-axis axis estimate = 1.25'
[Thu Oct  6 12:07:14 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 12:07:14 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Oct  6 12:07:14 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.376
[Thu Oct  6 12:07:14 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 0.38"
[Thu Oct  6 12:07:15 2011] fullrun_ccd7_acisf04979_pi14-548_cl_pass0_src22.ximg exists
[Thu Oct  6 12:07:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04979_pi14-548_cl_pass0_src22.csv
[Thu Oct  6 12:07:15 2011] fullrun_ccd7_acisf04979_pi14-548_cl_pass0_src22_1.ximg exists
[Thu Oct  6 12:07:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04979_pi14-548_cl_pass0_src22.csv
[Thu Oct  6 12:07:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04979_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04979_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 12:07:16 2011] fullrun_ccd7_acisf04979_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Thu Oct  6 12:07:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04979_pi14-548_cl_pass0_tfrozen_src22.csv
[Thu Oct  6 12:07:16 2011] fullrun_ccd7_acisf04979_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Oct  6 12:07:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04979_pi14-548_cl_pass0_tfrozen_src22.csv
[Thu Oct  6 12:07:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04979_pi14-548_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04979_pi14-548_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 12:07:32 2011] Spatial fit model total counts = 23.374000, observed total counts = 26.000000
[Thu Oct  6 12:07:32 2011] Offset between fit and detection position for source 18 = 2.481848 pixels
[Thu Oct  6 12:07:32 2011] 25.230660 total counts/ 20.973700 bgd. counts: snr = 0.929527
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 2.481848 pixels
  Position = (556.0, 707.5) = 8 53 31.82 23 23 58.7
  Extent = 1.5" x 1.4", rotation angle = 89
  Source counts = 4.3 +/- 5.0
  Background counts = 21.0
  Rate = 9e-05 +/- 0.0001
  Deleting source due to low Poisson probability