[Sun Sep 25 14:15:42 2011] Detection parameters:
  Position = (451.6, 632.7) = 16 28 10.18 39 35 12.3
  Extent = 0.9" x 0.6", rotation angle = 172 degrees
  Source counts = 12.0 +/- 3.9
  Background counts = 3.0
  Rate = 0.0006 +/- 0.0002

[Sun Sep 25 14:15:47 2011] Off-axis axis estimate = 4.60'
[Sun Sep 25 14:17:11 2011] Using EEF radius (= 1.03 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 14:17:11 2011] Initial guess for spatial extent in simple fitting = 1.03"
[Sun Sep 25 14:17:11 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.934
[Sun Sep 25 14:17:11 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.03"
[Sun Sep 25 14:17:12 2011] fullrun_ccd6_acisf00497_pi14-548_cl_pass0_src10.ximg exists
[Sun Sep 25 14:17:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00497_pi14-548_cl_pass0_src10.csv
[Sun Sep 25 14:17:12 2011] fullrun_ccd6_acisf00497_pi14-548_cl_pass0_src10_1.ximg exists
[Sun Sep 25 14:17:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00497_pi14-548_cl_pass0_src10.csv
[Sun Sep 25 14:17:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00497_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00497_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 14:17:12 2011] fullrun_ccd6_acisf00497_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sun Sep 25 14:17:12 2011] fullrun_ccd6_acisf00497_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Sep 25 14:17:12 2011] Fit fullrun_ccd6_acisf00497_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Sep 25 14:17:25 2011] Spatial fit model total counts = 25.255900, observed total counts = 26.000000
[Sun Sep 25 14:17:25 2011] Offset between fit and detection position for source 5 = 0.573848 pixels
[Sun Sep 25 14:17:25 2011] 23.741310 total counts/ 4.363110 bgd. counts: snr = 9.277167
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.573848 pixels
  Position = (452.1, 632.3) = 16 28 10.18 39 35 11.8
  Extent = 1.4 (0.3-2.1)", rotation angle = 0
  Source counts = 19.4 +/- 4.9
  Background counts = 4.4
  Rate = 0.001 +/- 0.0003
[Sun Sep 25 14:17:25 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 14:17:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 14:17:25 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 14:17:25 2011] Source does appear to be extended
[Sun Sep 25 14:17:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 14:17:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 14:17:48 2011] Initial guess for spatial extent in simple fitting = 1.45"
[Sun Sep 25 14:17:48 2011] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.031
[Sun Sep 25 14:17:48 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 1.45"
[Sun Sep 25 14:17:49 2011] fullrun_ccd6_acisf00497_pi14-548_cl_pass1_src10.ximg exists
[Sun Sep 25 14:17:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00497_pi14-548_cl_pass1_src10.csv
[Sun Sep 25 14:17:49 2011] fullrun_ccd6_acisf00497_pi14-548_cl_pass1_src10_1.ximg exists
[Sun Sep 25 14:17:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00497_pi14-548_cl_pass1_src10.csv
[Sun Sep 25 14:17:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00497_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00497_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 14:17:49 2011] fullrun_ccd6_acisf00497_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sun Sep 25 14:17:49 2011] fullrun_ccd6_acisf00497_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Sep 25 14:17:49 2011] Fit fullrun_ccd6_acisf00497_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Sep 25 14:17:56 2011] Spatial fit model total counts = 28.998600, observed total counts = 29.000000
[Sun Sep 25 14:17:56 2011] Offset between fit and detection position for source 5 = 0.961496 pixels
[Sun Sep 25 14:17:56 2011] 28.928900 total counts/ 11.013400 bgd. counts: snr = 5.398439
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.961496 pixels
  Position = (451.2, 631.9) = 16 28 10.22 39 35 11.6
  Extent = 1.4 (0.4-2.7)", rotation angle = 0
  Source counts = 17.9 +/- 5.4
  Background counts = 11.0
  Rate = 0.0009 +/- 0.0003
[Sun Sep 25 14:17:56 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 14:17:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 14:17:56 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 14:17:56 2011] Source does appear to be extended
[Sun Sep 25 14:17:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 14:18:44 2011] Not overwriting source region fullrun_ccd6_acisf00497_pi14-548_pass1_cl_src5_src.reg
[Sun Sep 25 14:18:44 2011] Extracting stamp from image fullrun_ccd6_acisf00497_pi14-548_cl_sm2.00.img.gz, (385, 566) - (517, 698)
[Sun Sep 25 14:18:44 2011] Writing fullrun_ccd6_acisf00497_pi14-548_pass1_cl_src5.gif
[Sun Sep 25 14:19:24 2011] ../../acisf00497/products/events/fullrun_ccd6_acisf00497_pi14-548_pass1_cl_src5_src.evt and ../../acisf00497/products/events/fullrun_ccd6_acisf00497_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sun Sep 25 14:19:24 2011] Size of ../../acisf00497/products/events/fullrun_ccd6_acisf00497_pi14-548_pass1_cl_src5_src.evt.gz[events] = 32 counts
[Sun Sep 25 14:19:24 2011] Mean chipx,y = (701.91, 561.81)
[Sun Sep 25 14:19:24 2011] Mean tdetx,y = (3576.91, 2263.81)
[Sun Sep 25 14:19:24 2011] chipx,y range = (681.00-722.00, 539.00-579.00)
[Sun Sep 25 14:19:24 2011] Size of ../../acisf00497/products/events/fullrun_ccd6_acisf00497_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 162 counts
[Sun Sep 25 14:19:24 2011] ../../acisf00497/products/images/fullrun_ccd6_acisf00497_pi14-548_pass1_cl_src5_src.img and ../../acisf00497/products/images/fullrun_ccd6_acisf00497_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sun Sep 25 14:19:24 2011] ../../acisf00497/products/spectra/fullrun_ccd6_acisf00497_pi14-548_pass1_cl_src5_src.pi and ../../acisf00497/products/spectra/fullrun_ccd6_acisf00497_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sun Sep 25 14:19:24 2011] Not generating rmf since there are only 17 counts
[Sun Sep 25 14:19:32 2011] ../../acisf00497/products/lightcurves/fullrun_ccd6_acisf00497_pi14-548_pass1_cl_src5_src.lc and ../../acisf00497/products/lightcurves/fullrun_ccd6_acisf00497_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sun Sep 25 14:19:46 2011] 207.251
[Sun Sep 25 14:20:19 2011] Updating aperture counts using extracted products
[Sun Sep 25 14:20:19 2011] Error reading totcts from fullrun_ccd6_acisf00497_pi14-548_pass1_cl_src5_src.pi.gz
[Sun Sep 25 14:20:19 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 14:20:19 2011] Using photon index=1.80, rate=0.00092, arf fullrun_ccd6_acisf00497_pi14-548_pass1_cl_src5.arf
[Sun Sep 25 14:20:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 14:20:19 2011] Updating source flux to 8.6e-15
[Sun Sep 25 14:20:41 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Sep 25 14:20:42 2011] acisf00497/analysis//spectral/fullrun_ccd6_acisf00497_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete