[Thu Sep 22 18:36:19 2011] Detection parameters:
  Position = (1006.6, 684.6) = 1 37 13.58 -12 56 23.1
  Extent = 2.6" x 1.4", rotation angle = 85 degrees
  Source counts = 95.0 +/- 10.4
  Background counts = 14.0
  Rate = 0.002 +/- 0.0002

[Thu Sep 22 18:36:22 2011] Off-axis axis estimate = 8.12'
[Thu Sep 22 18:38:25 2011] Using EEF radius (= 2.91 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 18:38:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 18:38:25 2011] Initial guess for spatial extent in simple fitting = 2.91"
[Thu Sep 22 18:38:25 2011] source mask rpix=5.9, npix_max = 165, mask sum = 169, frac = 1.024
[Thu Sep 22 18:38:25 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.91"
[Thu Sep 22 18:38:26 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src3.ximg exists
[Thu Sep 22 18:38:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src3.csv
[Thu Sep 22 18:38:26 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src3_1.ximg exists
[Thu Sep 22 18:38:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src3.csv
[Thu Sep 22 18:38:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 18:38:26 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Thu Sep 22 18:38:26 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Sep 22 18:38:26 2011] Fit fullrun_ccd3_acisf04967_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Sep 22 18:38:50 2011] Spatial fit model total counts = 114.996000, observed total counts = 115.000000
[Thu Sep 22 18:38:50 2011] Offset between fit and detection position for source 4 = 1.246549 pixels
[Thu Sep 22 18:38:50 2011] 115.168000 total counts/ 32.558300 bgd. counts: snr = 14.477720
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.246549 pixels
  Position = (1007.5, 685.4) = 1 37 13.56 -12 56 22.9
  Extent = 2.0 (1.6-2.6)", rotation angle = 0
  Source counts = 82.6 +/- 10.7
  Background counts = 32.6
  Rate = 0.002 +/- 0.0002
[Thu Sep 22 18:38:51 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 18:38:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 18:38:51 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 18:38:51 2011] Source does appear to be extended
[Thu Sep 22 18:38:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 18:39:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 18:39:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 18:39:50 2011] Initial guess for spatial extent in simple fitting = 2.03"
[Thu Sep 22 18:39:50 2011] source mask rpix=4.1, npix_max = 85, mask sum = 81, frac = 0.949
[Thu Sep 22 18:39:50 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.03"
[Thu Sep 22 18:39:54 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src3.ximg exists
[Thu Sep 22 18:39:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src3.csv
[Thu Sep 22 18:39:54 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src3_1.ximg exists
[Thu Sep 22 18:39:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src3.csv
[Thu Sep 22 18:39:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 18:39:54 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Thu Sep 22 18:39:54 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Sep 22 18:39:54 2011] Fit fullrun_ccd3_acisf04967_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Sep 22 18:40:18 2011] Spatial fit model total counts = 94.996000, observed total counts = 95.000000
[Thu Sep 22 18:40:18 2011] Offset between fit and detection position for source 4 = 0.265477 pixels
[Thu Sep 22 18:40:18 2011] 94.812200 total counts/ 19.292600 bgd. counts: snr = 17.193500
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.265477 pixels
  Position = (1007.7, 685.6) = 1 37 13.56 -12 56 22.8
  Extent = 1.8 (1.3-2.4)", rotation angle = 0
  Source counts = 75.5 +/- 9.7
  Background counts = 19.3
  Rate = 0.002 +/- 0.0002
[Thu Sep 22 18:40:18 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 18:40:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 18:40:18 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 18:40:18 2011] Source does appear to be extended
[Thu Sep 22 18:40:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 18:45:52 2011] Not overwriting source region fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src4_src.reg
[Thu Sep 22 18:45:52 2011] Extracting stamp from image fullrun_ccd3_acisf04967_pi14-548_cl_sm2.00.img.gz, (923, 601) - (1092, 770)
[Thu Sep 22 18:45:52 2011] Writing fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src4.gif
[Thu Sep 22 18:46:01 2011] ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src4_src.evt and ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Thu Sep 22 18:46:02 2011] Size of ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src4_src.evt.gz[events] = 107 counts
[Thu Sep 22 18:46:02 2011] Mean chipx,y = (93.98, 529.55)
[Thu Sep 22 18:46:02 2011] Mean tdetx,y = (4602.45, 3154.98)
[Thu Sep 22 18:46:02 2011] chipx,y range = (63.00-117.00, 503.00-558.00)
[Thu Sep 22 18:46:02 2011] Size of ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 121 counts
[Thu Sep 22 18:46:02 2011] ../../acisf04967/products/images/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src4_src.img and ../../acisf04967/products/images/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Thu Sep 22 18:46:02 2011] ../../acisf04967/products/spectra/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src4_src.pi and ../../acisf04967/products/spectra/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Thu Sep 22 18:46:02 2011] Not generating rmf since there are only 75 counts
[Thu Sep 22 18:46:04 2011] ../../acisf04967/products/lightcurves/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src4_src.lc and ../../acisf04967/products/lightcurves/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Thu Sep 22 18:47:28 2011] 167.986
[Thu Sep 22 18:47:52 2011] Updating aperture counts using extracted products
[Thu Sep 22 18:47:52 2011] Error reading totcts from fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src4_src.pi.gz
[Thu Sep 22 18:47:52 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 18:47:52 2011] Using photon index=1.80, rate=0.00168, arf fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src4.arf
[Thu Sep 22 18:47:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 18:47:52 2011] Updating source flux to 2.3e-14
[Thu Sep 22 18:48:12 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting