[Thu Sep 22 18:36:21 2011] Detection parameters:
  Position = (126.7, 902.1) = 1 37 43.19 -12 54 36.2
  Extent = 0.5" x 0.5", rotation angle = 49 degrees
  Source counts = 12.2 +/- 3.6
  Background counts = 0.8
  Rate = 0.0003 +/- 8e-05

[Thu Sep 22 18:36:22 2011] Off-axis axis estimate = 0.97'
[Thu Sep 22 18:38:25 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 18:38:25 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Sep 22 18:38:25 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926
[Thu Sep 22 18:38:25 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.38"
[Thu Sep 22 18:38:26 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src18.ximg exists
[Thu Sep 22 18:38:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src18.csv
[Thu Sep 22 18:38:26 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src18_1.ximg exists
[Thu Sep 22 18:38:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src18.csv
[Thu Sep 22 18:38:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 18:38:28 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Thu Sep 22 18:38:28 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Sep 22 18:38:28 2011] Fit fullrun_ccd3_acisf04967_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Thu Sep 22 18:38:51 2011] Spatial fit model total counts = 15.001200, observed total counts = 15.000000
[Thu Sep 22 18:38:51 2011] Offset between fit and detection position for source 22 = 0.380304 pixels
[Thu Sep 22 18:38:51 2011] 15.261260 total counts/ 3.527360 bgd. counts: snr = 6.247661
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.380304 pixels
  Position = (126.9, 902.4) = 1 37 43.20 -12 54 36.3
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 11.7 +/- 3.9
  Background counts = 3.5
  Rate = 0.0003 +/- 9e-05
[Thu Sep 22 18:38:51 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 18:38:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 18:38:51 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 18:38:51 2011] Source does appear to be extended
[Thu Sep 22 18:38:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 18:39:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 18:39:50 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Thu Sep 22 18:39:50 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.908
[Thu Sep 22 18:39:50 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.39"
[Thu Sep 22 18:39:54 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src18.ximg exists
[Thu Sep 22 18:39:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src18.csv
[Thu Sep 22 18:39:54 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src18_1.ximg exists
[Thu Sep 22 18:39:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src18.csv
[Thu Sep 22 18:39:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 18:39:55 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Thu Sep 22 18:39:55 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Sep 22 18:39:55 2011] Fit fullrun_ccd3_acisf04967_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Thu Sep 22 18:40:18 2011] Spatial fit model total counts = 14.999200, observed total counts = 15.000000
[Thu Sep 22 18:40:18 2011] Offset between fit and detection position for source 22 = 0.006139 pixels
[Thu Sep 22 18:40:18 2011] 15.028100 total counts/ 3.264700 bgd. counts: snr = 6.510453
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.006139 pixels
  Position = (126.9, 902.4) = 1 37 43.20 -12 54 36.3
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 11.8 +/- 3.9
  Background counts = 3.3
  Rate = 0.0003 +/- 9e-05
[Thu Sep 22 18:40:18 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 18:40:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 18:40:18 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 18:40:18 2011] Source does appear to be extended
[Thu Sep 22 18:40:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 18:45:53 2011] Not overwriting source region fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src22_src.reg
[Thu Sep 22 18:45:53 2011] Extracting stamp from image fullrun_ccd3_acisf04967_pi14-548_cl_sm2.00.img.gz, (109, 885) - (145, 920)
[Thu Sep 22 18:45:53 2011] Writing fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src22.gif
[Thu Sep 22 18:46:54 2011] ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src22_src.evt and ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Thu Sep 22 18:46:54 2011] Size of ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src22_src.evt.gz[events] = 12 counts
[Thu Sep 22 18:46:54 2011] Mean chipx,y = (924.33, 894.00)
[Thu Sep 22 18:46:54 2011] Mean tdetx,y = (4238.00, 3985.33)
[Thu Sep 22 18:46:54 2011] chipx,y range = (912.00-944.00, 878.00-910.00)
[Thu Sep 22 18:46:54 2011] Size of ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 6 counts
[Thu Sep 22 18:46:54 2011] ../../acisf04967/products/images/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src22_src.img and ../../acisf04967/products/images/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Thu Sep 22 18:46:54 2011] ../../acisf04967/products/spectra/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src22_src.pi and ../../acisf04967/products/spectra/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src22_bgd.pi exist, delete to re-create
[Thu Sep 22 18:46:54 2011] Not generating rmf since there are only 11 counts
[Thu Sep 22 18:46:56 2011] ../../acisf04967/products/lightcurves/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src22_src.lc and ../../acisf04967/products/lightcurves/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Thu Sep 22 18:47:31 2011] 203.991
[Thu Sep 22 18:47:52 2011] Updating aperture counts using extracted products
[Thu Sep 22 18:47:52 2011] Error reading totcts from fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src22_src.pi.gz
[Thu Sep 22 18:47:52 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 18:47:52 2011] Using photon index=1.80, rate=0.000261, arf fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src22.arf
[Thu Sep 22 18:47:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 18:47:52 2011] Updating source flux to 2.9e-15
[Thu Sep 22 18:48:12 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting