[Thu Sep 22 18:36:20 2011] Detection parameters:
  Position = (166.8, 888.7) = 1 37 41.84 -12 54 42.8
  Extent = 0.5" x 0.5", rotation angle = 148 degrees
  Source counts = 10.4 +/- 3.3
  Background counts = 0.6
  Rate = 0.0002 +/- 7e-05

[Thu Sep 22 18:36:22 2011] Off-axis axis estimate = 1.25'
[Thu Sep 22 18:38:25 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 18:38:25 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Sep 22 18:38:25 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.376
[Thu Sep 22 18:38:25 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.38"
[Thu Sep 22 18:38:26 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src19.ximg exists
[Thu Sep 22 18:38:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src19.csv
[Thu Sep 22 18:38:26 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src19_1.ximg exists
[Thu Sep 22 18:38:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src19.csv
[Thu Sep 22 18:38:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 18:38:28 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Thu Sep 22 18:38:28 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Sep 22 18:38:28 2011] Fit fullrun_ccd3_acisf04967_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Sep 22 18:38:51 2011] Spatial fit model total counts = 14.634000, observed total counts = 15.000000
[Thu Sep 22 18:38:51 2011] Offset between fit and detection position for source 21 = 0.707094 pixels
[Thu Sep 22 18:38:51 2011] 14.447100 total counts/ 3.698300 bgd. counts: snr = 5.589319
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.707094 pixels
  Position = (167.3, 889.2) = 1 37 41.84 -12 54 42.8
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 10.7 +/- 3.8
  Background counts = 3.7
  Rate = 0.0002 +/- 8e-05
[Thu Sep 22 18:38:51 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 18:38:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 18:38:51 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 18:38:51 2011] Source does appear to be extended
[Thu Sep 22 18:38:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 18:39:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 18:39:50 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Thu Sep 22 18:39:50 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.210
[Thu Sep 22 18:39:50 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.42"
[Thu Sep 22 18:39:54 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src19.ximg exists
[Thu Sep 22 18:39:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src19.csv
[Thu Sep 22 18:39:54 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src19_1.ximg exists
[Thu Sep 22 18:39:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src19.csv
[Thu Sep 22 18:39:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 18:39:55 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Thu Sep 22 18:39:55 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Sep 22 18:39:55 2011] Fit fullrun_ccd3_acisf04967_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Sep 22 18:40:18 2011] Spatial fit model total counts = 15.089200, observed total counts = 15.000000
[Thu Sep 22 18:40:18 2011] Offset between fit and detection position for source 21 = 0.001898 pixels
[Thu Sep 22 18:40:18 2011] 14.899130 total counts/ 4.154830 bgd. counts: snr = 5.271103
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.001898 pixels
  Position = (167.3, 889.2) = 1 37 41.84 -12 54 42.8
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 10.7 +/- 3.9
  Background counts = 4.2
  Rate = 0.0002 +/- 9e-05
[Thu Sep 22 18:40:18 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 18:40:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 18:40:18 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 18:40:18 2011] Source does appear to be extended
[Thu Sep 22 18:40:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 18:45:53 2011] Not overwriting source region fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src21_src.reg
[Thu Sep 22 18:45:53 2011] Extracting stamp from image fullrun_ccd3_acisf04967_pi14-548_cl_sm2.00.img.gz, (148, 870) - (187, 909)
[Thu Sep 22 18:45:53 2011] Writing fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src21.gif
[Thu Sep 22 18:46:56 2011] ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src21_src.evt and ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Thu Sep 22 18:46:56 2011] Size of ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src21_src.evt.gz[events] = 11 counts
[Thu Sep 22 18:46:56 2011] Mean chipx,y = (889.27, 872.91)
[Thu Sep 22 18:46:56 2011] Mean tdetx,y = (4259.09, 3950.27)
[Thu Sep 22 18:46:56 2011] chipx,y range = (873.00-906.00, 856.00-888.00)
[Thu Sep 22 18:46:56 2011] Size of ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 3 counts
[Thu Sep 22 18:46:56 2011] ../../acisf04967/products/images/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src21_src.img and ../../acisf04967/products/images/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Thu Sep 22 18:46:56 2011] ../../acisf04967/products/spectra/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src21_src.pi and ../../acisf04967/products/spectra/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Thu Sep 22 18:46:56 2011] Not generating rmf since there are only 10 counts
[Thu Sep 22 18:46:59 2011] ../../acisf04967/products/lightcurves/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src21_src.lc and ../../acisf04967/products/lightcurves/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Thu Sep 22 18:47:31 2011] 203.385
[Thu Sep 22 18:47:52 2011] Updating aperture counts using extracted products
[Thu Sep 22 18:47:52 2011] Error reading totcts from fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src21_src.pi.gz
[Thu Sep 22 18:47:52 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 18:47:52 2011] Using photon index=1.80, rate=0.000238, arf fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src21.arf
[Thu Sep 22 18:47:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 18:47:52 2011] Updating source flux to 2.7e-15
[Thu Sep 22 18:48:12 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting