[Thu Sep 22 18:36:20 2011] Detection parameters:
  Position = (336.1, 787.7) = 1 37 36.14 -12 55 32.5
  Extent = 0.7" x 0.5", rotation angle = 75 degrees
  Source counts = 18.7 +/- 4.5
  Background counts = 1.3
  Rate = 0.0004 +/- 0.0001

[Thu Sep 22 18:36:22 2011] Off-axis axis estimate = 2.82'
[Thu Sep 22 18:38:25 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 18:38:25 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Thu Sep 22 18:38:25 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.158
[Thu Sep 22 18:38:25 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.55"
[Thu Sep 22 18:38:26 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src15.ximg exists
[Thu Sep 22 18:38:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src15.csv
[Thu Sep 22 18:38:26 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src15_1.ximg exists
[Thu Sep 22 18:38:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src15.csv
[Thu Sep 22 18:38:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04967_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 18:38:28 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Thu Sep 22 18:38:28 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Sep 22 18:38:28 2011] Fit fullrun_ccd3_acisf04967_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Thu Sep 22 18:38:51 2011] Spatial fit model total counts = 23.787800, observed total counts = 24.000000
[Thu Sep 22 18:38:51 2011] Offset between fit and detection position for source 18 = 0.443191 pixels
[Thu Sep 22 18:38:51 2011] 24.629260 total counts/ 7.234860 bgd. counts: snr = 6.466874
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.443191 pixels
  Position = (336.5, 787.8) = 1 37 36.15 -12 55 32.7
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 17.4 +/- 5.0
  Background counts = 7.2
  Rate = 0.0004 +/- 0.0001
[Thu Sep 22 18:38:51 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 18:38:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 18:38:51 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 18:38:51 2011] Source does appear to be extended
[Thu Sep 22 18:38:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 18:39:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 18:39:50 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Thu Sep 22 18:39:50 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.893
[Thu Sep 22 18:39:50 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.54"
[Thu Sep 22 18:39:54 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src15.ximg exists
[Thu Sep 22 18:39:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src15.csv
[Thu Sep 22 18:39:54 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src15_1.ximg exists
[Thu Sep 22 18:39:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src15.csv
[Thu Sep 22 18:39:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04967_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 18:39:55 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Thu Sep 22 18:39:55 2011] fullrun_ccd3_acisf04967_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Sep 22 18:39:55 2011] Fit fullrun_ccd3_acisf04967_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Thu Sep 22 18:40:18 2011] Spatial fit model total counts = 23.371600, observed total counts = 24.000000
[Thu Sep 22 18:40:18 2011] Offset between fit and detection position for source 18 = 0.015913 pixels
[Thu Sep 22 18:40:18 2011] 24.332780 total counts/ 7.175080 bgd. counts: snr = 6.405392
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.015913 pixels
  Position = (336.5, 787.8) = 1 37 36.15 -12 55 32.7
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 17.2 +/- 4.9
  Background counts = 7.2
  Rate = 0.0004 +/- 0.0001
[Thu Sep 22 18:40:18 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 18:40:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 18:40:18 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 18:40:18 2011] Source does appear to be extended
[Thu Sep 22 18:40:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 18:45:53 2011] Not overwriting source region fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src18_src.reg
[Thu Sep 22 18:45:53 2011] Extracting stamp from image fullrun_ccd3_acisf04967_pi14-548_cl_sm2.00.img.gz, (312, 763) - (361, 812)
[Thu Sep 22 18:45:53 2011] Writing fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src18.gif
[Thu Sep 22 18:46:42 2011] ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src18_src.evt and ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Thu Sep 22 18:46:43 2011] Size of ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src18_src.evt.gz[events] = 20 counts
[Thu Sep 22 18:46:43 2011] Mean chipx,y = (736.10, 743.55)
[Thu Sep 22 18:46:43 2011] Mean tdetx,y = (4388.45, 3797.10)
[Thu Sep 22 18:46:43 2011] chipx,y range = (722.00-757.00, 725.00-762.00)
[Thu Sep 22 18:46:43 2011] Size of ../../acisf04967/products/events/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 13 counts
[Thu Sep 22 18:46:43 2011] ../../acisf04967/products/images/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src18_src.img and ../../acisf04967/products/images/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Thu Sep 22 18:46:43 2011] ../../acisf04967/products/spectra/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src18_src.pi and ../../acisf04967/products/spectra/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Thu Sep 22 18:46:43 2011] Not generating rmf since there are only 17 counts
[Thu Sep 22 18:46:47 2011] ../../acisf04967/products/lightcurves/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src18_src.lc and ../../acisf04967/products/lightcurves/fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Thu Sep 22 18:47:31 2011] 198.09
[Thu Sep 22 18:47:52 2011] Updating aperture counts using extracted products
[Thu Sep 22 18:47:52 2011] Error reading totcts from fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src18_src.pi.gz
[Thu Sep 22 18:47:52 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 18:47:52 2011] Using photon index=1.80, rate=0.000381, arf fullrun_ccd3_acisf04967_pi14-548_pass1_cl_src18.arf
[Thu Sep 22 18:47:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 18:47:52 2011] Updating source flux to 4.4e-15
[Thu Sep 22 18:48:12 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting