[Thu Sep 22 18:36:09 2011] Detection parameters:
  Position = (966.8, 1106.5) = 1 37 20.89 -12 44 27.8
  Extent = 4.7" x 3.5", rotation angle = 123 degrees
  Source counts = 195.0 +/- 15.9
  Background counts = 58.0
  Rate = 0.004 +/- 0.0004

[Thu Sep 22 18:36:17 2011] Off-axis axis estimate = 11.00'
[Thu Sep 22 18:38:23 2011] Using EEF radius (= 5.38 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 18:38:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 18:38:23 2011] Initial guess for spatial extent in simple fitting = 5.38"
[Thu Sep 22 18:38:23 2011] source mask rpix=10.9, npix_max = 523, mask sum = 506, frac = 0.966
[Thu Sep 22 18:38:23 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.38"
[Thu Sep 22 18:38:24 2011] fullrun_ccd2_acisf04967_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 18:38:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04967_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 18:38:24 2011] fullrun_ccd2_acisf04967_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 18:38:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04967_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 18:38:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04967_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04967_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 18:38:24 2011] fullrun_ccd2_acisf04967_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 18:38:24 2011] fullrun_ccd2_acisf04967_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 18:38:24 2011] Fit fullrun_ccd2_acisf04967_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 18:38:45 2011] Spatial fit model total counts = 308.258000, observed total counts = 312.000000
[Thu Sep 22 18:38:45 2011] Offset between fit and detection position for source 1 = 1.839643 pixels
[Thu Sep 22 18:38:45 2011] 308.128000 total counts/ 90.234000 bgd. counts: snr = 22.938244
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.839643 pixels
  Position = (967.1, 1108.3) = 1 37 20.90 -12 44 27.2
  Extent = 4.6 (4.0-5.3)", rotation angle = 0
  Source counts = 217.9 +/- 17.6
  Background counts = 90.2
  Rate = 0.005 +/- 0.0004
[Thu Sep 22 18:38:45 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 18:38:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 18:38:45 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 18:38:45 2011] Source does appear to be extended
[Thu Sep 22 18:38:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 18:39:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 18:39:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 18:39:43 2011] Initial guess for spatial extent in simple fitting = 4.56"
[Thu Sep 22 18:39:43 2011] source mask rpix=9.3, npix_max = 381, mask sum = 361, frac = 0.947
[Thu Sep 22 18:39:43 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.56"
[Thu Sep 22 18:39:44 2011] fullrun_ccd2_acisf04967_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 18:39:45 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf04967_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 18:39:45 2011] fullrun_ccd2_acisf04967_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 18:39:45 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf04967_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 18:39:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04967_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04967_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 18:39:46 2011] fullrun_ccd2_acisf04967_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 18:39:46 2011] fullrun_ccd2_acisf04967_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 18:39:46 2011] Fit fullrun_ccd2_acisf04967_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 18:40:15 2011] Spatial fit model total counts = 285.250000, observed total counts = 289.000000
[Thu Sep 22 18:40:15 2011] Offset between fit and detection position for source 1 = 0.162137 pixels
[Thu Sep 22 18:40:15 2011] 284.886800 total counts/ 74.277800 bgd. counts: snr = 24.436973
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.162137 pixels
  Position = (967.2, 1108.5) = 1 37 20.90 -12 44 27.1
  Extent = 4.4 (3.8-5.2)", rotation angle = 0
  Source counts = 210.6 +/- 16.9
  Background counts = 74.3
  Rate = 0.005 +/- 0.0004
[Thu Sep 22 18:40:15 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 18:40:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 18:40:15 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 18:40:15 2011] Source does appear to be extended
[Thu Sep 22 18:40:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 18:43:51 2011] Not overwriting source region fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1_src.reg
[Thu Sep 22 18:43:51 2011] Extracting stamp from image fullrun_ccd2_acisf04967_pi14-548_cl_sm2.00.img.gz, (766, 907) - (1169, 1191)
[Thu Sep 22 18:43:51 2011] Writing fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1.gif
[Thu Sep 22 18:43:55 2011] ../../acisf04967/products/events/fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1_src.evt and ../../acisf04967/products/events/fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Sep 22 18:43:55 2011] Size of ../../acisf04967/products/events/fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1_src.evt.gz[events] = 281 counts
[Thu Sep 22 18:43:55 2011] Mean chipx,y = (960.66, 65.02)
[Thu Sep 22 18:43:55 2011] Mean tdetx,y = (3126.02, 3125.34)
[Thu Sep 22 18:43:55 2011] chipx,y range = (915.00-1006.00, 24.00-110.00)
[Thu Sep 22 18:43:55 2011] Size of ../../acisf04967/products/events/fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 214 counts
[Thu Sep 22 18:43:55 2011] ../../acisf04967/products/images/fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1_src.img and ../../acisf04967/products/images/fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Sep 22 18:43:55 2011] ../../acisf04967/products/spectra/fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1_src.pi and ../../acisf04967/products/spectra/fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Sep 22 18:43:57 2011] ../../acisf04967/products/lightcurves/fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1_src.lc and ../../acisf04967/products/lightcurves/fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Sep 22 18:45:50 2011] Keeping rmf generated by specextract
[Thu Sep 22 18:45:50 2011] 148.128
[Thu Sep 22 18:47:51 2011] Updating aperture counts using extracted products
[Thu Sep 22 18:47:51 2011] Error reading totcts from fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Sep 22 18:47:52 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 18:47:52 2011] Using photon index=1.80, rate=0.00467, arf fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 18:47:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 18:47:52 2011] Updating source flux to 7.2e-14
[Thu Sep 22 18:48:12 2011] Reading fit data from acisf04967/analysis//spectral/fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1_pl.csv
[Thu Sep 22 18:48:12 2011] Spectral fit parameter nH value = 2.80752e+21
[Thu Sep 22 18:48:12 2011] Spectral fit parameter PhoIndex value = 1.60244
[Thu Sep 22 18:48:12 2011] Failed to get F(0.3-8.0) from acisf04967/analysis//spectral/fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 18:48:12 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 18:48:12 2011] Using Nh = 2.8e+21, photon index=1.60, rate=0.00467, arf fullrun_ccd2_acisf04967_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 18:48:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 18:48:12 2011] Updating source flux to 7.6e-14