[Mon Sep 26 08:29:56 2011] Detection parameters:
  Position = (700.8, 459.0) = 15 39 10.78 21 40 47.5
  Extent = 2.7" x 1.7", rotation angle = 151 degrees
  Source counts = 180.6 +/- 14.2
  Background counts = 21.4
  Rate = 0.005 +/- 0.0004

[Mon Sep 26 08:29:58 2011] Off-axis axis estimate = 8.05'
[Mon Sep 26 08:30:55 2011] Using EEF radius (= 2.87 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:30:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 08:30:55 2011] Initial guess for spatial extent in simple fitting = 2.87"
[Mon Sep 26 08:30:55 2011] source mask rpix=5.8, npix_max = 160, mask sum = 156, frac = 0.975
[Mon Sep 26 08:30:55 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.87"
[Mon Sep 26 08:30:56 2011] fullrun_ccd0_acisf04960_pi14-548_cl_pass0_src1.ximg exists
[Mon Sep 26 08:30:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04960_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 08:30:58 2011] fullrun_ccd0_acisf04960_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Sep 26 08:30:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04960_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 08:30:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04960_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04960_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:30:59 2011] fullrun_ccd0_acisf04960_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 08:30:59 2011] fullrun_ccd0_acisf04960_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 08:30:59 2011] Fit fullrun_ccd0_acisf04960_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 08:31:09 2011] Spatial fit model total counts = 228.993000, observed total counts = 229.000000
[Mon Sep 26 08:31:09 2011] Offset between fit and detection position for source 2 = 0.456541 pixels
[Mon Sep 26 08:31:09 2011] 229.216400 total counts/ 56.688400 bgd. counts: snr = 22.914611
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.456541 pixels
  Position = (700.9, 459.4) = 15 39 10.79 21 40 47.5
  Extent = 2.6 (2.2-2.9)", rotation angle = 0
  Source counts = 172.5 +/- 15.1
  Background counts = 56.7
  Rate = 0.005 +/- 0.0004
[Mon Sep 26 08:31:09 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:31:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:31:09 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 08:31:09 2011] Source does appear to be extended
[Mon Sep 26 08:31:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:31:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:31:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 08:31:30 2011] Initial guess for spatial extent in simple fitting = 2.57"
[Mon Sep 26 08:31:30 2011] source mask rpix=5.2, npix_max = 131, mask sum = 132, frac = 1.005
[Mon Sep 26 08:31:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.57"
[Mon Sep 26 08:31:31 2011] fullrun_ccd0_acisf04960_pi14-548_cl_pass1_src1.ximg exists
[Mon Sep 26 08:31:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04960_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 08:31:31 2011] fullrun_ccd0_acisf04960_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Sep 26 08:31:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04960_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 08:31:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04960_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04960_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:31:33 2011] fullrun_ccd0_acisf04960_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 08:31:33 2011] fullrun_ccd0_acisf04960_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 08:31:33 2011] Fit fullrun_ccd0_acisf04960_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 08:31:41 2011] Spatial fit model total counts = 216.997000, observed total counts = 217.000000
[Mon Sep 26 08:31:41 2011] Offset between fit and detection position for source 2 = 0.138192 pixels
[Mon Sep 26 08:31:41 2011] 216.631200 total counts/ 42.252200 bgd. counts: snr = 26.826840
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.138192 pixels
  Position = (701.0, 459.4) = 15 39 10.79 21 40 47.5
  Extent = 2.6 (2.2-2.9)", rotation angle = 0
  Source counts = 174.4 +/- 14.7
  Background counts = 42.3
  Rate = 0.005 +/- 0.0004
[Mon Sep 26 08:31:41 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:31:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:31:41 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 08:31:41 2011] Source does appear to be extended
[Mon Sep 26 08:31:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:32:01 2011] Not overwriting source region fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2_src.reg
[Mon Sep 26 08:32:01 2011] Extracting stamp from image fullrun_ccd0_acisf04960_pi14-548_cl_sm2.00.img.gz, (582, 341) - (820, 578)
[Mon Sep 26 08:32:01 2011] Writing fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2.gif
[Mon Sep 26 08:32:02 2011] ../../acisf04960/products/events/fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2_src.evt and ../../acisf04960/products/events/fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Sep 26 08:32:02 2011] Size of ../../acisf04960/products/events/fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2_src.evt.gz[events] = 212 counts
[Mon Sep 26 08:32:02 2011] Mean chipx,y = (353.58, 432.76)
[Mon Sep 26 08:32:02 2011] Mean tdetx,y = (3493.76, 4778.42)
[Mon Sep 26 08:32:02 2011] chipx,y range = (323.00-385.00, 400.00-465.00)
[Mon Sep 26 08:32:03 2011] Size of ../../acisf04960/products/events/fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 209 counts
[Mon Sep 26 08:32:03 2011] ../../acisf04960/products/images/fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2_src.img and ../../acisf04960/products/images/fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Sep 26 08:32:03 2011] ../../acisf04960/products/spectra/fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2_src.pi and ../../acisf04960/products/spectra/fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Sep 26 08:32:05 2011] ../../acisf04960/products/lightcurves/fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2_src.lc and ../../acisf04960/products/lightcurves/fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Sep 26 08:32:58 2011] Keeping rmf generated by specextract
[Mon Sep 26 08:32:58 2011] 174.393
[Mon Sep 26 08:35:20 2011] Updating aperture counts using extracted products
[Mon Sep 26 08:35:20 2011] Error reading totcts from fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Sep 26 08:35:20 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 08:35:20 2011] Using photon index=1.80, rate=0.0049, arf fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2.arf
[Mon Sep 26 08:35:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 08:35:20 2011] Updating source flux to 6.3e-14
[Mon Sep 26 08:35:32 2011] Reading fit data from acisf04960/analysis//spectral/fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2_pl.csv
[Mon Sep 26 08:35:32 2011] Spectral fit parameter nH value = 4.68118e+19
[Mon Sep 26 08:35:32 2011] Spectral fit parameter PhoIndex value = 1.25381
[Mon Sep 26 08:35:32 2011] Failed to get F(0.3-8.0) from acisf04960/analysis//spectral/fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 08:35:32 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 08:35:32 2011] Using Nh = 4.7e+19, photon index=1.25, rate=0.0049, arf fullrun_ccd0_acisf04960_pi14-548_pass1_cl_src2.arf
[Mon Sep 26 08:35:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 08:35:32 2011] Updating source flux to 7.7e-14