[Wed Oct 26 20:56:49 2011] Detection parameters:
  Position = (878.4, 258.8) = 5 22 4.73 -36 28 33.9
  Extent = 1.0" x 0.5", rotation angle = 162 degrees
  Source counts = 15.4 +/- 4.0
  Background counts = 0.6
  Rate = 0.0008 +/- 0.0002

[Wed Oct 26 20:56:50 2011] Off-axis axis estimate = 4.17'
[Wed Oct 26 20:57:24 2011] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 20:57:24 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Wed Oct 26 20:57:24 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.188
[Wed Oct 26 20:57:24 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.88"
[Wed Oct 26 20:57:25 2011] fullrun_ccd3_acisf04926_pi14-548_cl_pass0_src10.ximg exists
[Wed Oct 26 20:57:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04926_pi14-548_cl_pass0_src10.csv
[Wed Oct 26 20:57:25 2011] fullrun_ccd3_acisf04926_pi14-548_cl_pass0_src10_1.ximg exists
[Wed Oct 26 20:57:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04926_pi14-548_cl_pass0_src10.csv
[Wed Oct 26 20:57:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04926_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04926_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 20:57:26 2011] fullrun_ccd3_acisf04926_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed Oct 26 20:57:26 2011] fullrun_ccd3_acisf04926_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Oct 26 20:57:26 2011] Fit fullrun_ccd3_acisf04926_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Oct 26 20:57:33 2011] Spatial fit model total counts = 16.043300, observed total counts = 20.000000
[Wed Oct 26 20:57:33 2011] Offset between fit and detection position for source 25 = 0.776651 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.776651 pixels
  Position = (878.4, 259.5) = 5 22 4.75 -36 28 33.7
  Extent = 1.3 (0.9-1.8)" x 0.4 (0.3-0.6)", rotation angle = 12
  Source counts = 15.1 +/- 3.9
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Wed Oct 26 20:57:33 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 20:57:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 20:57:33 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 20:57:33 2011] Source does appear to be extended
[Wed Oct 26 20:57:33 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.51
[Wed Oct 26 20:57:33 2011] Source is asymmetric
[Wed Oct 26 20:57:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 20:57:50 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Wed Oct 26 20:57:50 2011] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.275
[Wed Oct 26 20:57:50 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.84"
[Wed Oct 26 20:57:51 2011] fullrun_ccd3_acisf04926_pi14-548_cl_pass1_src10.ximg exists
[Wed Oct 26 20:57:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04926_pi14-548_cl_pass1_src10.csv
[Wed Oct 26 20:57:51 2011] fullrun_ccd3_acisf04926_pi14-548_cl_pass1_src10_1.ximg exists
[Wed Oct 26 20:57:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04926_pi14-548_cl_pass1_src10.csv
[Wed Oct 26 20:57:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04926_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04926_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 20:57:51 2011] fullrun_ccd3_acisf04926_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed Oct 26 20:57:51 2011] fullrun_ccd3_acisf04926_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Oct 26 20:57:51 2011] Fit fullrun_ccd3_acisf04926_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Oct 26 20:57:58 2011] Spatial fit model total counts = 19.263300, observed total counts = 20.000000
[Wed Oct 26 20:57:58 2011] Offset between fit and detection position for source 25 = 0.444506 pixels
[Wed Oct 26 20:57:58 2011] 18.317310 total counts/ 6.931610 bgd. counts: snr = 4.324567
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.444506 pixels
  Position = (878.9, 259.5) = 5 22 4.73 -36 28 33.7
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 11.4 +/- 4.3
  Background counts = 6.9
  Rate = 0.0006 +/- 0.0002
[Wed Oct 26 20:57:58 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 20:57:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 20:57:58 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 20:57:58 2011] Source does appear to be extended
[Wed Oct 26 20:57:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:02:11 2011] Not overwriting source region fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25_src.reg
[Wed Oct 26 21:02:11 2011] Extracting stamp from image fullrun_ccd3_acisf04926_pi14-548_cl_sm2.00.img.gz, (854, 234) - (904, 285)
[Wed Oct 26 21:02:11 2011] Writing fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25.gif
[Wed Oct 26 21:03:21 2011] ../../acisf04926/products/events/fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25_src.evt and ../../acisf04926/products/events/fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25_bgd.evt exist, delete to re-create
[Wed Oct 26 21:03:21 2011] Size of ../../acisf04926/products/events/fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25_src.evt.gz[events] = 14 counts
[Wed Oct 26 21:03:21 2011] Mean chipx,y = (174.57, 788.00)
[Wed Oct 26 21:03:21 2011] Mean tdetx,y = (4344.00, 3235.57)
[Wed Oct 26 21:03:21 2011] chipx,y range = (156.00-190.00, 774.00-804.00)
[Wed Oct 26 21:03:21 2011] Size of ../../acisf04926/products/events/fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 4 counts
[Wed Oct 26 21:03:21 2011] ../../acisf04926/products/images/fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25_src.img and ../../acisf04926/products/images/fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25_bgd.img exist, delete to re-create
[Wed Oct 26 21:03:21 2011] Not generating rmf since there are only 11 counts
[Wed Oct 26 21:03:21 2011] arf not found, will run specextract
[Wed Oct 26 21:03:23 2011] ../../acisf04926/products/spectra/fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25_bkg.pi not found
[Wed Oct 26 21:03:23 2011] ../../acisf04926/products/spectra/fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25.warf not found
[Wed Oct 26 21:03:23 2011] ../../acisf04926/products/spectra/fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25.wrmf not found
[Wed Oct 26 21:03:23 2011] Removal of ../../acisf04926/products/spectra/fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25.soff failed
[Wed Oct 26 21:03:23 2011] Failed to rename ../../acisf04926/products/spectra/fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25_grp.pi to ../../acisf04926/products/spectra/fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25_src.pi
[Wed Oct 26 21:03:29 2011] ../../acisf04926/products/lightcurves/fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25_src.lc and ../../acisf04926/products/lightcurves/fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25_bgd.lc exist, delete to re-create
[Wed Oct 26 21:05:07 2011] No arf file found
[Wed Oct 26 21:05:10 2011] Updating aperture counts using extracted products
[Wed Oct 26 21:05:10 2011] Error reading totcts from fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25_src.pi
[Wed Oct 26 21:05:10 2011] No arf file for this source, not re-computing flux
[Wed Oct 26 21:05:15 2011] Source 25 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 26 21:05:16 2011] acisf04926/analysis//spectral/fullrun_ccd3_acisf04926_pi14-548_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete