[Fri Sep 23 23:10:31 2011] Detection parameters:
  Position = (146.3, 754.1) = 12 30 48.22 12 23 35.0
  Extent = 0.7" x 0.6", rotation angle = 29 degrees
  Source counts = 131.4 +/- 16.8
  Background counts = 151.6
  Rate = 0.03 +/- 0.004

[Fri Sep 23 23:10:31 2011] Off-axis axis estimate = 0.75'
[Fri Sep 23 23:10:47 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 23:10:47 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Sep 23 23:10:47 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.917
[Fri Sep 23 23:10:47 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.38"
[Fri Sep 23 23:10:48 2011] fullrun_ccd7_acisf04919_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 23 23:10:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04919_pi14-548_cl_pass0_src3.csv
[Fri Sep 23 23:10:48 2011] fullrun_ccd7_acisf04919_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 23 23:10:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04919_pi14-548_cl_pass0_src3.csv
[Fri Sep 23 23:10:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04919_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04919_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 23:10:48 2011] fullrun_ccd7_acisf04919_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 23 23:10:48 2011] fullrun_ccd7_acisf04919_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 23 23:10:48 2011] Fit fullrun_ccd7_acisf04919_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 23 23:10:50 2011] Spatial fit model total counts = 706.000000, observed total counts = 706.000000
[Fri Sep 23 23:10:50 2011] Offset between fit and detection position for source 3 = 0.175087 pixels
[Fri Sep 23 23:10:50 2011] 683.705300 total counts/ 605.052000 bgd. counts: snr = 3.197574
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.175087 pixels
  Position = (146.4, 754.3) = 12 30 48.24 12 23 34.9
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 78.7 +/- 26.1
  Background counts = 605.1
  Rate = 0.02 +/- 0.006
[Fri Sep 23 23:10:50 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 23:10:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 23:10:50 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 23:10:50 2011] Source does appear to be extended
[Fri Sep 23 23:10:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 23:10:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 23:10:56 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Fri Sep 23 23:10:56 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.774
[Fri Sep 23 23:10:56 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.59"
[Fri Sep 23 23:10:57 2011] fullrun_ccd7_acisf04919_pi14-548_cl_pass1_src3.ximg exists
[Fri Sep 23 23:10:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04919_pi14-548_cl_pass1_src3.csv
[Fri Sep 23 23:10:57 2011] fullrun_ccd7_acisf04919_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Sep 23 23:10:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04919_pi14-548_cl_pass1_src3.csv
[Fri Sep 23 23:10:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04919_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04919_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 23:10:57 2011] fullrun_ccd7_acisf04919_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 23 23:10:57 2011] fullrun_ccd7_acisf04919_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 23 23:10:57 2011] Fit fullrun_ccd7_acisf04919_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 23 23:10:59 2011] Spatial fit model total counts = 711.268000, observed total counts = 706.000000
[Fri Sep 23 23:10:59 2011] Offset between fit and detection position for source 3 = 0.008613 pixels
[Fri Sep 23 23:10:59 2011] 688.735700 total counts/ 610.099000 bgd. counts: snr = 3.183649
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.008613 pixels
  Position = (146.4, 754.3) = 12 30 48.24 12 23 34.9
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 78.6 +/- 26.2
  Background counts = 610.1
  Rate = 0.02 +/- 0.006
[Fri Sep 23 23:10:59 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 23:10:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 23:10:59 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 23:10:59 2011] Source does appear to be extended
[Fri Sep 23 23:10:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 23:11:05 2011] Not overwriting source region fullrun_ccd7_acisf04919_pi14-548_pass1_cl_src3_src.reg
[Fri Sep 23 23:11:05 2011] Extracting stamp from image fullrun_ccd7_acisf04919_pi14-548_cl_sm2.00.img.gz, (119, 727) - (174, 781)
[Fri Sep 23 23:11:05 2011] Writing fullrun_ccd7_acisf04919_pi14-548_pass1_cl_src3.gif
[Fri Sep 23 23:11:14 2011] ../../acisf04919/products/events/fullrun_ccd7_acisf04919_pi14-548_pass1_cl_src3_src.evt and ../../acisf04919/products/events/fullrun_ccd7_acisf04919_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Sep 23 23:11:14 2011] Size of ../../acisf04919/products/events/fullrun_ccd7_acisf04919_pi14-548_pass1_cl_src3_src.evt.gz[events] = 234 counts
[Fri Sep 23 23:11:14 2011] Mean chipx,y = (288.92, 475.17)
[Fri Sep 23 23:11:14 2011] Mean tdetx,y = (4205.92, 2177.17)
[Fri Sep 23 23:11:14 2011] chipx,y range = (268.00-308.00, 457.00-495.00)
[Fri Sep 23 23:11:15 2011] Size of ../../acisf04919/products/events/fullrun_ccd7_acisf04919_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 1071 counts
[Fri Sep 23 23:11:15 2011] ../../acisf04919/products/images/fullrun_ccd7_acisf04919_pi14-548_pass1_cl_src3_src.img and ../../acisf04919/products/images/fullrun_ccd7_acisf04919_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Sep 23 23:11:15 2011] ../../acisf04919/products/spectra/fullrun_ccd7_acisf04919_pi14-548_pass1_cl_src3_src.pi and ../../acisf04919/products/spectra/fullrun_ccd7_acisf04919_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Sep 23 23:11:15 2011] Not generating rmf since there are only 78 counts
[Fri Sep 23 23:11:20 2011] ../../acisf04919/products/lightcurves/fullrun_ccd7_acisf04919_pi14-548_pass1_cl_src3_src.lc and ../../acisf04919/products/lightcurves/fullrun_ccd7_acisf04919_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Sep 23 23:11:30 2011] 238.33
[Fri Sep 23 23:11:31 2011] Updating aperture counts using extracted products
[Fri Sep 23 23:11:31 2011] Error reading totcts from fullrun_ccd7_acisf04919_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Sep 23 23:11:31 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 23:11:31 2011] Using photon index=1.80, rate=0.0167, arf fullrun_ccd7_acisf04919_pi14-548_pass1_cl_src3.arf
[Fri Sep 23 23:11:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 23:11:31 2011] Updating source flux to 1.1e-13
[Fri Sep 23 23:11:31 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting