[Mon Oct 24 06:29:00 2011] Detection parameters:
  Position = (1048.1, 83.6) = 0 42 54.19 -9 37 49.9
  Extent = 0.5" x 0.5", rotation angle = 67 degrees
  Source counts = 18.8 +/- 4.4
  Background counts = 0.2
  Rate = 0.002 +/- 0.0004

[Mon Oct 24 06:29:01 2011] Off-axis axis estimate = 1.00'
[Mon Oct 24 06:29:40 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 06:29:40 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 24 06:29:40 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.927
[Mon Oct 24 06:29:40 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Mon Oct 24 06:29:41 2011] fullrun_ccd0_acisf04881_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 06:29:41 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf04881_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 06:29:41 2011] fullrun_ccd0_acisf04881_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 06:29:41 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf04881_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 06:29:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04881_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04881_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 06:29:41 2011] fullrun_ccd0_acisf04881_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 06:29:41 2011] fullrun_ccd0_acisf04881_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 06:29:41 2011] Fit fullrun_ccd0_acisf04881_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 06:29:46 2011] Spatial fit model total counts = 18.951000, observed total counts = 19.000000
[Mon Oct 24 06:29:46 2011] Offset between fit and detection position for source 1 = 0.722874 pixels
[Mon Oct 24 06:29:46 2011] 18.951100 total counts/ 0.000000 bgd. counts: snr = 433759023101.911987
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.722874 pixels
  Position = (1048.7, 84.1) = 0 42 54.19 -9 37 50.0
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 19.0 +/- 4.4
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Mon Oct 24 06:29:46 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 06:29:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 06:29:46 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 06:29:46 2011] Source does appear to be extended
[Mon Oct 24 06:29:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 06:30:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 06:30:01 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Mon Oct 24 06:30:01 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.811
[Mon Oct 24 06:30:01 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.42"
[Mon Oct 24 06:30:01 2011] fullrun_ccd0_acisf04881_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 06:30:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04881_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 06:30:01 2011] fullrun_ccd0_acisf04881_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 06:30:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04881_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 06:30:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04881_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04881_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 06:30:01 2011] fullrun_ccd0_acisf04881_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 06:30:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04881_pi14-548_cl_pass1_tfrozen_src1.csv
[Mon Oct 24 06:30:01 2011] fullrun_ccd0_acisf04881_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 06:30:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04881_pi14-548_cl_pass1_tfrozen_src1.csv
[Mon Oct 24 06:30:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04881_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04881_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 06:30:07 2011] Spatial fit model total counts = 17.924400, observed total counts = 19.000000
[Mon Oct 24 06:30:07 2011] Offset between fit and detection position for source 1 = 0.069233 pixels
[Mon Oct 24 06:30:07 2011] 17.924587 total counts/ 0.001787 bgd. counts: snr = 424.020967
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.069233 pixels
  Position = (1048.6, 84.1) = 0 42 54.19 -9 37 49.9
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 17.9 +/- 4.2
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Mon Oct 24 06:30:07 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 06:30:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 06:30:07 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 06:30:07 2011] Source does appear to be extended
[Mon Oct 24 06:30:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 06:30:21 2011] Not overwriting source region fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 24 06:30:21 2011] Extracting stamp from image fullrun_ccd0_acisf04881_pi14-548_cl_sm2.00.img.gz, (1028, 63) - (1065, 105)
[Mon Oct 24 06:30:21 2011] Writing fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1.gif
[Mon Oct 24 06:30:21 2011] ../../acisf04881/products/events/fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1_src.evt and ../../acisf04881/products/events/fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 24 06:30:21 2011] Size of ../../acisf04881/products/events/fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1_src.evt.gz[events] = 19 counts
[Mon Oct 24 06:30:21 2011] Mean chipx,y = (1009.79, 979.89)
[Mon Oct 24 06:30:21 2011] Mean tdetx,y = (4040.89, 4122.21)
[Mon Oct 24 06:30:21 2011] chipx,y range = (1001.00-1023.00, 962.00-996.00)
[Mon Oct 24 06:30:21 2011] Size of ../../acisf04881/products/events/fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1 counts
[Mon Oct 24 06:30:22 2011] ../../acisf04881/products/images/fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1_src.img and ../../acisf04881/products/images/fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 24 06:30:22 2011] Not generating rmf since there are only 17 counts
[Mon Oct 24 06:30:22 2011] arf not found, will run specextract
[Mon Oct 24 06:30:24 2011] ../../acisf04881/products/spectra/fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1_bkg.pi not found
[Mon Oct 24 06:30:24 2011] ../../acisf04881/products/spectra/fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1.warf not found
[Mon Oct 24 06:30:24 2011] ../../acisf04881/products/spectra/fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1.wrmf not found
[Mon Oct 24 06:30:24 2011] Removal of ../../acisf04881/products/spectra/fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1.soff failed
[Mon Oct 24 06:30:24 2011] Failed to rename ../../acisf04881/products/spectra/fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1_grp.pi to ../../acisf04881/products/spectra/fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1_src.pi
[Mon Oct 24 06:30:29 2011] ../../acisf04881/products/lightcurves/fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1_src.lc and ../../acisf04881/products/lightcurves/fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 24 06:31:05 2011] No arf file found
[Mon Oct 24 06:35:07 2011] Updating aperture counts using extracted products
[Mon Oct 24 06:35:07 2011] Error reading totcts from fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1_src.pi
[Mon Oct 24 06:35:08 2011] No arf file for this source, not re-computing flux
[Mon Oct 24 06:35:10 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 24 06:35:11 2011] acisf04881/analysis//spectral/fullrun_ccd0_acisf04881_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete