[Thu Oct 20 00:16:51 2011] Detection parameters:
  Position = (552.7, 107.3) = 15 50 29.68 62 48 39.8
  Extent = 2.7" x 1.9", rotation angle = 112 degrees
  Source counts = 156.9 +/- 13.1
  Background counts = 14.1
  Rate = 0.005 +/- 0.0005

[Thu Oct 20 00:16:51 2011] Off-axis axis estimate = 7.96'
[Thu Oct 20 00:17:37 2011] Using EEF radius (= 2.80 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 00:17:37 2011] Initial guess for spatial extent in simple fitting = 2.80"
[Thu Oct 20 00:17:37 2011] source mask rpix=5.7, npix_max = 153, mask sum = 144, frac = 0.937
[Thu Oct 20 00:17:37 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 2.80"
[Thu Oct 20 00:17:37 2011] fullrun_ccd2_acisf04818_pi14-548_cl_pass0_src4.ximg exists
[Thu Oct 20 00:17:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04818_pi14-548_cl_pass0_src4.csv
[Thu Oct 20 00:17:37 2011] fullrun_ccd2_acisf04818_pi14-548_cl_pass0_src4_1.ximg exists
[Thu Oct 20 00:17:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04818_pi14-548_cl_pass0_src4.csv
[Thu Oct 20 00:17:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04818_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04818_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 00:17:37 2011] fullrun_ccd2_acisf04818_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Thu Oct 20 00:17:37 2011] fullrun_ccd2_acisf04818_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Oct 20 00:17:37 2011] Fit fullrun_ccd2_acisf04818_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Oct 20 00:17:43 2011] Spatial fit model total counts = 177.620000, observed total counts = 177.000000
[Thu Oct 20 00:17:43 2011] Offset between fit and detection position for source 5 = 0.675816 pixels
[Thu Oct 20 00:17:43 2011] 177.627100 total counts/ 25.391100 bgd. counts: snr = 30.211800
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.675816 pixels
  Position = (553.3, 107.6) = 15 50 29.67 62 48 39.8
  Extent = 2.7 (2.4-3.1)", rotation angle = 0
  Source counts = 152.2 +/- 13.3
  Background counts = 25.4
  Rate = 0.005 +/- 0.0005
[Thu Oct 20 00:17:43 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 00:17:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 00:17:43 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 00:17:43 2011] Source does appear to be extended
[Thu Oct 20 00:17:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 00:18:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 00:18:01 2011] Initial guess for spatial extent in simple fitting = 2.69"
[Thu Oct 20 00:18:01 2011] source mask rpix=5.5, npix_max = 141, mask sum = 144, frac = 1.014
[Thu Oct 20 00:18:01 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 2.69"
[Thu Oct 20 00:18:02 2011] fullrun_ccd2_acisf04818_pi14-548_cl_pass1_src4.ximg exists
[Thu Oct 20 00:18:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04818_pi14-548_cl_pass1_src4.csv
[Thu Oct 20 00:18:02 2011] fullrun_ccd2_acisf04818_pi14-548_cl_pass1_src4_1.ximg exists
[Thu Oct 20 00:18:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04818_pi14-548_cl_pass1_src4.csv
[Thu Oct 20 00:18:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04818_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04818_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 00:18:02 2011] fullrun_ccd2_acisf04818_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Thu Oct 20 00:18:02 2011] fullrun_ccd2_acisf04818_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Oct 20 00:18:02 2011] Fit fullrun_ccd2_acisf04818_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Oct 20 00:18:08 2011] Spatial fit model total counts = 175.528000, observed total counts = 175.000000
[Thu Oct 20 00:18:08 2011] Offset between fit and detection position for source 5 = 0.051498 pixels
[Thu Oct 20 00:18:08 2011] 175.457800 total counts/ 23.744800 bgd. counts: snr = 31.134259
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.051498 pixels
  Position = (553.3, 107.7) = 15 50 29.67 62 48 39.8
  Extent = 2.7 (2.4-3.1)", rotation angle = 0
  Source counts = 151.7 +/- 13.2
  Background counts = 23.7
  Rate = 0.005 +/- 0.0005
[Thu Oct 20 00:18:08 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 00:18:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 00:18:08 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 00:18:08 2011] Source does appear to be extended
[Thu Oct 20 00:18:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 00:18:26 2011] Not overwriting source region fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5_src.reg
[Thu Oct 20 00:18:26 2011] Extracting stamp from image fullrun_ccd2_acisf04818_pi14-548_cl_sm2.00.img.gz, (431, 0) - (676, 230)
[Thu Oct 20 00:18:26 2011] Writing fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5.gif
[Thu Oct 20 00:18:37 2011] ../../acisf04818/products/events/fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5_src.evt and ../../acisf04818/products/events/fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu Oct 20 00:18:37 2011] Size of ../../acisf04818/products/events/fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5_src.evt.gz[events] = 172 counts
[Thu Oct 20 00:18:37 2011] Mean chipx,y = (906.52, 979.52)
[Thu Oct 20 00:18:37 2011] Mean tdetx,y = (4040.52, 3179.48)
[Thu Oct 20 00:18:37 2011] chipx,y range = (874.00-938.00, 947.00-1003.00)
[Thu Oct 20 00:18:37 2011] Size of ../../acisf04818/products/events/fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 93 counts
[Thu Oct 20 00:18:37 2011] ../../acisf04818/products/images/fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5_src.img and ../../acisf04818/products/images/fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu Oct 20 00:18:37 2011] ../../acisf04818/products/spectra/fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5_src.pi and ../../acisf04818/products/spectra/fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Thu Oct 20 00:18:39 2011] ../../acisf04818/products/lightcurves/fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5_src.lc and ../../acisf04818/products/lightcurves/fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu Oct 20 00:18:40 2011] Keeping rmf generated by specextract
[Thu Oct 20 00:18:40 2011] 172.64
[Thu Oct 20 00:20:39 2011] Updating aperture counts using extracted products
[Thu Oct 20 00:20:39 2011] Error reading totcts from fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5_src.pi.gz
[Thu Oct 20 00:20:39 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 00:20:39 2011] Using photon index=1.80, rate=0.00529, arf fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5.arf
[Thu Oct 20 00:20:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 00:20:39 2011] Updating source flux to 7e-14
[Thu Oct 20 00:20:46 2011] Reading fit data from acisf04818/analysis//spectral/fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5_pl.csv
[Thu Oct 20 00:20:46 2011] Spectral fit parameter nH value = 1.07654e+22
[Thu Oct 20 00:20:46 2011] Spectral fit parameter PhoIndex value = 2.23472
[Thu Oct 20 00:20:46 2011] Failed to get F(0.3-8.0) from acisf04818/analysis//spectral/fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Thu Oct 20 00:20:46 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 00:20:46 2011] Using Nh = 1.1e+22, photon index=2.23, rate=0.00529, arf fullrun_ccd2_acisf04818_pi14-548_pass1_cl_src5.arf
[Thu Oct 20 00:20:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 00:20:46 2011] Updating source flux to 7.4e-14