[Fri Oct 14 22:57:42 2011] Detection parameters:
  Position = (916.2, 523.3) = 3 42 17.83 -35 23 53.0
  Extent = 0.8" x 0.5", rotation angle = 61 degrees
  Source counts = 12.5 +/- 4.0
  Background counts = 3.5
  Rate = 0.0002 +/- 8e-05

[Fri Oct 14 22:57:46 2011] Off-axis axis estimate = 0.33'
[Fri Oct 14 22:58:51 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:58:51 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Fri Oct 14 22:58:51 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.296
[Fri Oct 14 22:58:51 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 0.40"
[Fri Oct 14 22:58:53 2011] fullrun_ccd7_acisf04742_pi14-548_cl_pass0_src39.ximg exists
[Fri Oct 14 22:58:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04742_pi14-548_cl_pass0_src39.csv
[Fri Oct 14 22:58:53 2011] fullrun_ccd7_acisf04742_pi14-548_cl_pass0_src39_1.ximg exists
[Fri Oct 14 22:58:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04742_pi14-548_cl_pass0_src39.csv
[Fri Oct 14 22:58:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04742_pi14-548_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04742_pi14-548_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:58:54 2011] fullrun_ccd7_acisf04742_pi14-548_cl_pass0_tfrozen_src39.ximg exists
[Fri Oct 14 22:58:54 2011] fullrun_ccd7_acisf04742_pi14-548_cl_pass0_tfrozen_src39_1.ximg exists
[Fri Oct 14 22:58:54 2011] Fit fullrun_ccd7_acisf04742_pi14-548_cl_pass0_tfrozen_src39 appears to have run properly
[Fri Oct 14 22:59:12 2011] Spatial fit model total counts = 27.994700, observed total counts = 28.000000
[Fri Oct 14 22:59:12 2011] Offset between fit and detection position for source 23 = 1.466668 pixels
[Fri Oct 14 22:59:12 2011] 28.231800 total counts/ 18.117800 bgd. counts: snr = 2.376130
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.466668 pixels
  Position = (917.2, 524.3) = 3 42 17.80 -35 23 52.8
  Extent = 0.3 (0.1-0.5)", rotation angle = 0
  Source counts = 10.1 +/- 5.3
  Background counts = 18.1
  Rate = 0.0002 +/- 0.0001
[Fri Oct 14 22:59:12 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:59:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:59:12 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:59:12 2011] Source does appear to be extended
[Fri Oct 14 22:59:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:59:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:59:39 2011] Initial guess for spatial extent in simple fitting = 0.32"
[Fri Oct 14 22:59:39 2011] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.756
[Fri Oct 14 22:59:39 2011] Giving source the simple spatial ID 39 for pass 1, mean size = 0.32"
[Fri Oct 14 22:59:41 2011] fullrun_ccd7_acisf04742_pi14-548_cl_pass1_src39.ximg exists
[Fri Oct 14 22:59:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04742_pi14-548_cl_pass1_src39.csv
[Fri Oct 14 22:59:41 2011] fullrun_ccd7_acisf04742_pi14-548_cl_pass1_src39_1.ximg exists
[Fri Oct 14 22:59:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04742_pi14-548_cl_pass1_src39.csv
[Fri Oct 14 22:59:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04742_pi14-548_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04742_pi14-548_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:59:43 2011] fullrun_ccd7_acisf04742_pi14-548_cl_pass1_tfrozen_src39.ximg exists
[Fri Oct 14 22:59:43 2011] fullrun_ccd7_acisf04742_pi14-548_cl_pass1_tfrozen_src39_1.ximg exists
[Fri Oct 14 22:59:43 2011] Fit fullrun_ccd7_acisf04742_pi14-548_cl_pass1_tfrozen_src39 appears to have run properly
[Fri Oct 14 22:59:57 2011] Spatial fit model total counts = 27.993000, observed total counts = 28.000000
[Fri Oct 14 22:59:57 2011] Offset between fit and detection position for source 23 = 0.016859 pixels
[Fri Oct 14 22:59:57 2011] 27.485100 total counts/ 17.423100 bgd. counts: snr = 2.410580
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.016859 pixels
  Position = (917.3, 524.3) = 3 42 17.80 -35 23 52.8
  Extent = 0.3 (0.1-0.5)", rotation angle = 0
  Source counts = 10.1 +/- 5.2
  Background counts = 17.4
  Rate = 0.0002 +/- 0.0001
[Fri Oct 14 22:59:57 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:59:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:59:57 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:59:57 2011] Source does appear to be extended
[Fri Oct 14 22:59:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 23:03:41 2011] Not overwriting source region fullrun_ccd7_acisf04742_pi14-548_pass1_cl_src23_src.reg
[Fri Oct 14 23:03:41 2011] Extracting stamp from image fullrun_ccd7_acisf04742_pi14-548_cl_sm2.00.img.gz, (903, 510) - (932, 539)
[Fri Oct 14 23:03:41 2011] Writing fullrun_ccd7_acisf04742_pi14-548_pass1_cl_src23.gif
[Fri Oct 14 23:06:03 2011] ../../acisf04742/products/events/fullrun_ccd7_acisf04742_pi14-548_pass1_cl_src23_src.evt and ../../acisf04742/products/events/fullrun_ccd7_acisf04742_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Fri Oct 14 23:06:04 2011] Size of ../../acisf04742/products/events/fullrun_ccd7_acisf04742_pi14-548_pass1_cl_src23_src.evt.gz[events] = 12 counts
[Fri Oct 14 23:06:04 2011] Mean chipx,y = (225.33, 473.08)
[Fri Oct 14 23:06:04 2011] Mean tdetx,y = (4142.33, 2175.08)
[Fri Oct 14 23:06:04 2011] chipx,y range = (211.00-238.00, 457.00-488.00)
[Fri Oct 14 23:06:04 2011] Size of ../../acisf04742/products/events/fullrun_ccd7_acisf04742_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 15 counts
[Fri Oct 14 23:06:04 2011] ../../acisf04742/products/images/fullrun_ccd7_acisf04742_pi14-548_pass1_cl_src23_src.img and ../../acisf04742/products/images/fullrun_ccd7_acisf04742_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Fri Oct 14 23:06:04 2011] ../../acisf04742/products/spectra/fullrun_ccd7_acisf04742_pi14-548_pass1_cl_src23_src.pi and ../../acisf04742/products/spectra/fullrun_ccd7_acisf04742_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Fri Oct 14 23:06:04 2011] Not generating rmf since there are only 10 counts
[Fri Oct 14 23:06:07 2011] ../../acisf04742/products/lightcurves/fullrun_ccd7_acisf04742_pi14-548_pass1_cl_src23_src.lc and ../../acisf04742/products/lightcurves/fullrun_ccd7_acisf04742_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Fri Oct 14 23:07:59 2011] 238.352
[Fri Oct 14 23:08:04 2011] Updating aperture counts using extracted products
[Fri Oct 14 23:08:04 2011] Error reading totcts from fullrun_ccd7_acisf04742_pi14-548_pass1_cl_src23_src.pi.gz
[Fri Oct 14 23:08:05 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 23:08:05 2011] Using photon index=1.80, rate=0.000197, arf fullrun_ccd7_acisf04742_pi14-548_pass1_cl_src23.arf
[Fri Oct 14 23:08:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 23:08:05 2011] Updating source flux to 1.4e-15
[Fri Oct 14 23:09:47 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting