[Fri Oct 21 19:51:25 2011] Detection parameters:
  Position = (1003.5, 1090.5) = 14 2 28.46 54 16 26.4
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 141.0 +/- 12.3
  Background counts = 10.0
  Rate = 0.004 +/- 0.0003

[Fri Oct 21 19:51:27 2011] Off-axis axis estimate = 5.65'
[Fri Oct 21 19:52:31 2011] Using EEF radius (= 1.46 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 19:52:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 19:52:31 2011] Initial guess for spatial extent in simple fitting = 1.46"
[Fri Oct 21 19:52:31 2011] source mask rpix=3.0, npix_max = 48, mask sum = 36, frac = 0.747
[Fri Oct 21 19:52:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.46"
[Fri Oct 21 19:52:31 2011] fullrun_ccd6_acisf04734_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 19:52:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04734_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 19:52:31 2011] fullrun_ccd6_acisf04734_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 19:52:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04734_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 19:52:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf04734_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf04734_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 19:52:32 2011] fullrun_ccd6_acisf04734_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 19:52:32 2011] fullrun_ccd6_acisf04734_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 19:52:32 2011] Fit fullrun_ccd6_acisf04734_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 19:52:43 2011] Spatial fit model total counts = 525.869000, observed total counts = 549.000000
[Fri Oct 21 19:52:43 2011] Offset between fit and detection position for source 1 = 3.537039 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.537039 pixels
  Position = (1007.0, 1091.1) = 14 2 28.29 54 16 26.5
  Extent = 1.9 (1.8-2.0)", rotation angle = 0
  Source counts = 524.9 +/- 22.9
  Background counts = 0.0
  Rate = 0.01 +/- 0.0006
[Fri Oct 21 19:52:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 19:52:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 19:52:44 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 19:52:44 2011] Source does appear to be extended
[Fri Oct 21 19:52:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 19:53:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 19:53:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 19:53:11 2011] Initial guess for spatial extent in simple fitting = 1.91"
[Fri Oct 21 19:53:11 2011] source mask rpix=3.9, npix_max = 76, mask sum = 51, frac = 0.666
[Fri Oct 21 19:53:11 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.91"
[Fri Oct 21 19:53:11 2011] fullrun_ccd6_acisf04734_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 19:53:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04734_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 19:53:11 2011] fullrun_ccd6_acisf04734_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 19:53:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04734_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 19:53:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf04734_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf04734_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 19:53:12 2011] fullrun_ccd6_acisf04734_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 19:53:12 2011] fullrun_ccd6_acisf04734_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 19:53:12 2011] Fit fullrun_ccd6_acisf04734_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 19:53:24 2011] Spatial fit model total counts = 578.277000, observed total counts = 601.000000
[Fri Oct 21 19:53:24 2011] Offset between fit and detection position for source 1 = 0.431007 pixels
[Fri Oct 21 19:53:24 2011] 577.596300 total counts/ 22.223300 bgd. counts: snr = 117.809547
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.431007 pixels
  Position = (1007.4, 1091.1) = 14 2 28.27 54 16 26.5
  Extent = 2.0 (1.9-2.1)", rotation angle = 0
  Source counts = 555.4 +/- 24.0
  Background counts = 22.2
  Rate = 0.02 +/- 0.0007
[Fri Oct 21 19:53:24 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 19:53:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 19:53:24 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 19:53:24 2011] Source does appear to be extended
[Fri Oct 21 19:53:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 19:54:39 2011] Not overwriting source region fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 21 19:54:39 2011] Extracting stamp from image fullrun_ccd6_acisf04734_pi14-548_cl_sm2.00.img.gz, (917, 1001) - (1098, 1182)
[Fri Oct 21 19:54:39 2011] Writing fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1.gif
[Fri Oct 21 19:54:41 2011] ../../acisf04734/products/events/fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1_src.evt and ../../acisf04734/products/events/fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 21 19:54:41 2011] Size of ../../acisf04734/products/events/fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1_src.evt.gz[events] = 598 counts
[Fri Oct 21 19:54:41 2011] Mean chipx,y = (766.13, 1002.70)
[Fri Oct 21 19:54:41 2011] Mean tdetx,y = (3641.13, 2704.70)
[Fri Oct 21 19:54:41 2011] chipx,y range = (739.00-795.00, 974.00-1022.00)
[Fri Oct 21 19:54:41 2011] Size of ../../acisf04734/products/events/fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 160 counts
[Fri Oct 21 19:54:41 2011] ../../acisf04734/products/images/fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1_src.img and ../../acisf04734/products/images/fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 21 19:54:41 2011] ../../acisf04734/products/spectra/fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1_src.pi and ../../acisf04734/products/spectra/fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 21 19:54:44 2011] ../../acisf04734/products/lightcurves/fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1_src.lc and ../../acisf04734/products/lightcurves/fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 21 19:56:01 2011] Keeping rmf generated by specextract
[Fri Oct 21 19:56:01 2011] 190.118
[Fri Oct 21 19:58:49 2011] Updating aperture counts using extracted products
[Fri Oct 21 19:58:49 2011] Error reading totcts from fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 21 19:58:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 19:58:49 2011] Using photon index=1.80, rate=0.0157, arf fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 19:58:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 19:58:49 2011] Updating source flux to 1.9e-13
[Fri Oct 21 19:59:05 2011] Reading fit data from acisf04734/analysis//spectral/fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 21 19:59:05 2011] Spectral fit parameter nH value = 5.62026e+21
[Fri Oct 21 19:59:05 2011] Spectral fit parameter PhoIndex value = 2.71666
[Fri Oct 21 19:59:05 2011] Failed to get F(0.3-8.0) from acisf04734/analysis//spectral/fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 19:59:05 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 19:59:05 2011] Using Nh = 5.6e+21, photon index=2.72, rate=0.0157, arf fullrun_ccd6_acisf04734_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 19:59:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 19:59:05 2011] Updating source flux to 1.4e-13