[Mon Sep 26 23:38:36 2011] Detection parameters:
  Position = (784.4, 200.4) = 14 3 13.60 54 26 15.1
  Extent = 0.6" x 0.5", rotation angle = 120 degrees
  Source counts = 15.1 +/- 4.0
  Background counts = 0.9
  Rate = 0.0003 +/- 7e-05

[Mon Sep 26 23:38:37 2011] Off-axis axis estimate = 2.69'
[Mon Sep 26 23:40:28 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 23:40:28 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Mon Sep 26 23:40:28 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.922
[Mon Sep 26 23:40:28 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.52"
[Mon Sep 26 23:40:30 2011] fullrun_ccd6_acisf04731_pi14-548_cl_pass0_src13.ximg exists
[Mon Sep 26 23:40:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04731_pi14-548_cl_pass0_src13.csv
[Mon Sep 26 23:40:30 2011] fullrun_ccd6_acisf04731_pi14-548_cl_pass0_src13_1.ximg exists
[Mon Sep 26 23:40:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04731_pi14-548_cl_pass0_src13.csv
[Mon Sep 26 23:40:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf04731_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf04731_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 23:40:33 2011] fullrun_ccd6_acisf04731_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Mon Sep 26 23:40:33 2011] fullrun_ccd6_acisf04731_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Sep 26 23:40:33 2011] Fit fullrun_ccd6_acisf04731_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Sep 26 23:41:11 2011] Spatial fit model total counts = 18.505900, observed total counts = 18.000000
[Mon Sep 26 23:41:11 2011] Offset between fit and detection position for source 28 = 0.731378 pixels
[Mon Sep 26 23:41:11 2011] 18.646940 total counts/ 2.375140 bgd. counts: snr = 10.558227
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.731378 pixels
  Position = (784.9, 200.9) = 14 3 13.60 54 26 15.1
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 16.3 +/- 4.3
  Background counts = 2.4
  Rate = 0.0003 +/- 8e-05
[Mon Sep 26 23:41:11 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 23:41:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 23:41:11 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 23:41:11 2011] Source does appear to be extended
[Mon Sep 26 23:41:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 23:41:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 23:41:46 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Mon Sep 26 23:41:46 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.387
[Mon Sep 26 23:41:46 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.59"
[Mon Sep 26 23:41:51 2011] fullrun_ccd6_acisf04731_pi14-548_cl_pass1_src13.ximg exists
[Mon Sep 26 23:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04731_pi14-548_cl_pass1_src13.csv
[Mon Sep 26 23:41:51 2011] fullrun_ccd6_acisf04731_pi14-548_cl_pass1_src13_1.ximg exists
[Mon Sep 26 23:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04731_pi14-548_cl_pass1_src13.csv
[Mon Sep 26 23:41:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf04731_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf04731_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 23:41:53 2011] fullrun_ccd6_acisf04731_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Mon Sep 26 23:41:53 2011] fullrun_ccd6_acisf04731_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Sep 26 23:41:53 2011] Fit fullrun_ccd6_acisf04731_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Sep 26 23:42:13 2011] Spatial fit model total counts = 19.562100, observed total counts = 19.000000
[Mon Sep 26 23:42:13 2011] Offset between fit and detection position for source 28 = 0.006573 pixels
[Mon Sep 26 23:42:13 2011] 19.786930 total counts/ 3.625930 bgd. counts: snr = 8.487084
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.006573 pixels
  Position = (784.9, 200.9) = 14 3 13.60 54 26 15.1
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 16.2 +/- 4.4
  Background counts = 3.6
  Rate = 0.0003 +/- 8e-05
[Mon Sep 26 23:42:13 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 23:42:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 23:42:13 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 23:42:13 2011] Source does appear to be extended
[Mon Sep 26 23:42:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 23:43:33 2011] Not overwriting source region fullrun_ccd6_acisf04731_pi14-548_pass1_cl_src28_src.reg
[Mon Sep 26 23:43:33 2011] Extracting stamp from image fullrun_ccd6_acisf04731_pi14-548_cl_sm2.00.img.gz, (758, 174) - (812, 228)
[Mon Sep 26 23:43:33 2011] Writing fullrun_ccd6_acisf04731_pi14-548_pass1_cl_src28.gif
[Mon Sep 26 23:44:17 2011] ../../acisf04731/products/events/fullrun_ccd6_acisf04731_pi14-548_pass1_cl_src28_src.evt and ../../acisf04731/products/events/fullrun_ccd6_acisf04731_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Mon Sep 26 23:44:17 2011] Size of ../../acisf04731/products/events/fullrun_ccd6_acisf04731_pi14-548_pass1_cl_src28_src.evt.gz[events] = 16 counts
[Mon Sep 26 23:44:17 2011] Mean chipx,y = (941.00, 395.69)
[Mon Sep 26 23:44:17 2011] Mean tdetx,y = (3816.00, 2097.69)
[Mon Sep 26 23:44:17 2011] chipx,y range = (923.00-957.00, 378.00-413.00)
[Mon Sep 26 23:44:17 2011] Size of ../../acisf04731/products/events/fullrun_ccd6_acisf04731_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 14 counts
[Mon Sep 26 23:44:17 2011] ../../acisf04731/products/images/fullrun_ccd6_acisf04731_pi14-548_pass1_cl_src28_src.img and ../../acisf04731/products/images/fullrun_ccd6_acisf04731_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Mon Sep 26 23:44:17 2011] ../../acisf04731/products/spectra/fullrun_ccd6_acisf04731_pi14-548_pass1_cl_src28_src.pi and ../../acisf04731/products/spectra/fullrun_ccd6_acisf04731_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Mon Sep 26 23:44:17 2011] Not generating rmf since there are only 16 counts
[Mon Sep 26 23:44:20 2011] ../../acisf04731/products/lightcurves/fullrun_ccd6_acisf04731_pi14-548_pass1_cl_src28_src.lc and ../../acisf04731/products/lightcurves/fullrun_ccd6_acisf04731_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Mon Sep 26 23:44:54 2011] 212.381
[Mon Sep 26 23:49:01 2011] Updating aperture counts using extracted products
[Mon Sep 26 23:49:01 2011] Error reading totcts from fullrun_ccd6_acisf04731_pi14-548_pass1_cl_src28_src.pi.gz
[Mon Sep 26 23:49:02 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 23:49:02 2011] Using photon index=1.80, rate=0.000287, arf fullrun_ccd6_acisf04731_pi14-548_pass1_cl_src28.arf
[Mon Sep 26 23:49:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 23:49:02 2011] Updating source flux to 2.9e-15
[Mon Sep 26 23:49:24 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting