[Thu Feb 16 08:43:12 2012] Detection parameters:
  Position = (778.2, 1290.6) = 0 42 44.68 41 16 17.8
  Extent = 0.5" x 0.5", rotation angle = 179 degrees
  Source counts = 14.3 +/- 4.0
  Background counts = 1.7
  Rate = 0.003 +/- 0.001

[Thu Feb 16 08:43:12 2012] Off-axis axis estimate = 0.24'
[Thu Feb 16 09:38:34 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:38:34 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Thu Feb 16 09:38:34 2012] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.269
[Thu Feb 16 09:38:34 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 0.41"
[Thu Feb 16 10:13:30 2012] fullrun_ccd3_acisf04720_pi14-548_cl_pass0_src28.ximg exists
[Thu Feb 16 10:13:30 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf04720_pi14-548_cl_pass0_src28.csv
[Thu Feb 16 10:13:30 2012] fullrun_ccd3_acisf04720_pi14-548_cl_pass0_src28_1.ximg exists
[Thu Feb 16 10:13:30 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf04720_pi14-548_cl_pass0_src28.csv
[Thu Feb 16 10:13:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04720_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04720_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 10:13:30 2012] fullrun_ccd3_acisf04720_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Thu Feb 16 10:13:30 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf04720_pi14-548_cl_pass0_tfrozen_src28.csv
[Thu Feb 16 10:13:30 2012] fullrun_ccd3_acisf04720_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Feb 16 10:13:30 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf04720_pi14-548_cl_pass0_tfrozen_src28.csv
[Thu Feb 16 10:13:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04720_pi14-548_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04720_pi14-548_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 10:40:29 2012] Source 31 is offset by 2.233171 and -3.107726 pixels which is larger than
2 X fitted extent = 0.415894 x 0.415894, not incorporating fit results
[Thu Feb 16 10:40:29 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 10:40:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 10:40:29 2012] Assessing source extent using major
[Thu Feb 16 10:40:29 2012] Source does appear to be extended
[Thu Feb 16 10:40:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 11:25:08 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 11:25:08 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Thu Feb 16 11:25:08 2012] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.269
[Thu Feb 16 11:25:08 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 0.41"
[Thu Feb 16 11:39:16 2012] fullrun_ccd3_acisf04720_pi14-548_cl_pass1_src12.ximg exists
[Thu Feb 16 11:39:16 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf04720_pi14-548_cl_pass1_src12.csv
[Thu Feb 16 11:39:16 2012] fullrun_ccd3_acisf04720_pi14-548_cl_pass1_src12_1.ximg exists
[Thu Feb 16 11:39:16 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf04720_pi14-548_cl_pass1_src12.csv
[Thu Feb 16 11:39:16 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04720_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04720_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 11:39:16 2012] fullrun_ccd3_acisf04720_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Thu Feb 16 11:39:16 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf04720_pi14-548_cl_pass1_tfrozen_src12.csv
[Thu Feb 16 11:39:16 2012] fullrun_ccd3_acisf04720_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Feb 16 11:39:16 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf04720_pi14-548_cl_pass1_tfrozen_src12.csv
[Thu Feb 16 11:39:16 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04720_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04720_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 12:01:05 2012] Source 31 is offset by -3.077154 and 1.952154 pixels which is larger than
2 X fitted extent = 0.415894 x 0.415894, not incorporating fit results
[Thu Feb 16 12:01:05 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 12:01:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 12:01:05 2012] Assessing source extent using major
[Thu Feb 16 12:01:05 2012] Source does appear to be extended
[Thu Feb 16 12:01:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 12:09:29 2012] Writing source region out to fullrun_ccd3_acisf04720_pi14-548_pass1_cl_src31_src.reg
[Thu Feb 16 12:09:29 2012] Extracting stamp from image fullrun_ccd3_acisf04720_pi14-548_cl_sm2.00.img.gz, (756, 1268) - (801, 1313)
[Thu Feb 16 12:09:29 2012] Writing fullrun_ccd3_acisf04720_pi14-548_pass1_cl_src31.gif
[Thu Feb 16 12:14:44 2012] ../../acisf04720/products/events/fullrun_ccd3_acisf04720_pi14-548_pass1_cl_src31_src.evt.gz[events] does not have any counts, not extracting products.
[Thu Feb 16 12:16:08 2012] No arf file found
[Thu Feb 16 12:17:41 2012] Updating aperture counts using extracted products
[Thu Feb 16 12:17:41 2012] Error reading totcts from fullrun_ccd3_acisf04720_pi14-548_pass1_cl_src31_src.pi
[Thu Feb 16 12:17:41 2012] No arf file for this source, not re-computing flux
[Thu Feb 16 12:17:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Feb 16 12:17:48 2012] acisf04720/analysis//spectral/fullrun_ccd3_acisf04720_pi14-548_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete