[Thu Feb 16 08:43:08 2012] Detection parameters:
  Position = (396.4, 393.7) = 0 42 25.13 41 13 40.3
  Extent = 0.7" x 0.5", rotation angle = 58 degrees
  Source counts = 12.9 +/- 3.6
  Background counts = 0.1
  Rate = 0.003 +/- 0.0009

[Thu Feb 16 08:43:09 2012] Off-axis axis estimate = 4.39'
[Thu Feb 16 09:11:28 2012] Using EEF radius (= 0.95 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:11:28 2012] Initial guess for spatial extent in simple fitting = 0.95"
[Thu Feb 16 09:11:28 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.049
[Thu Feb 16 09:11:28 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 0.95"
[Thu Feb 16 09:38:34 2012] fullrun_ccd2_acisf04720_pi14-548_cl_pass0_src22.ximg exists
[Thu Feb 16 09:38:34 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf04720_pi14-548_cl_pass0_src22.csv
[Thu Feb 16 09:38:34 2012] fullrun_ccd2_acisf04720_pi14-548_cl_pass0_src22_1.ximg exists
[Thu Feb 16 09:38:34 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf04720_pi14-548_cl_pass0_src22.csv
[Thu Feb 16 09:38:34 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04720_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04720_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 09:38:34 2012] fullrun_ccd2_acisf04720_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Thu Feb 16 09:38:34 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf04720_pi14-548_cl_pass0_tfrozen_src22.csv
[Thu Feb 16 09:38:34 2012] fullrun_ccd2_acisf04720_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Feb 16 09:38:34 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf04720_pi14-548_cl_pass0_tfrozen_src22.csv
[Thu Feb 16 09:38:34 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04720_pi14-548_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04720_pi14-548_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 10:40:25 2012] Source 16 is offset by 1.422411 and -0.269581 pixels which is larger than
2 X fitted extent = 0.970280 x 0.970280, not incorporating fit results
[Thu Feb 16 10:40:25 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 10:40:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 10:40:25 2012] Assessing source extent using major
[Thu Feb 16 10:40:25 2012] Source does appear to be extended
[Thu Feb 16 10:40:25 2012] Computing asymmetry using major and minor axis, asym = 1.43
[Thu Feb 16 11:03:53 2012] Using EEF radius (= 0.95 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 11:03:53 2012] Initial guess for spatial extent in simple fitting = 0.95"
[Thu Feb 16 11:03:53 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.049
[Thu Feb 16 11:03:53 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 0.95"
[Thu Feb 16 11:25:07 2012] fullrun_ccd2_acisf04720_pi14-548_cl_pass1_src17.ximg exists
[Thu Feb 16 11:25:07 2012] fullrun_ccd2_acisf04720_pi14-548_cl_pass1_src17_1.ximg exists
[Thu Feb 16 11:25:07 2012] Fit fullrun_ccd2_acisf04720_pi14-548_cl_pass1_src17 appears to have run properly
[Thu Feb 16 11:25:07 2012] fullrun_ccd2_acisf04720_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Thu Feb 16 11:25:07 2012] fullrun_ccd2_acisf04720_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Feb 16 11:25:07 2012] Fit fullrun_ccd2_acisf04720_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Thu Feb 16 12:01:03 2012] Source 16 is offset by -7.339405 and -5.826401 pixels which is larger than
2 X fitted extent = 0.970280 x 0.970280, not incorporating fit results
[Thu Feb 16 12:01:03 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 12:01:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 12:01:03 2012] Assessing source extent using major
[Thu Feb 16 12:01:03 2012] Source does appear to be extended
[Thu Feb 16 12:01:03 2012] Computing asymmetry using major and minor axis, asym = 1.43
[Thu Feb 16 12:04:53 2012] Writing source region out to fullrun_ccd2_acisf04720_pi14-548_pass1_cl_src16_src.reg
[Thu Feb 16 12:04:53 2012] Extracting stamp from image fullrun_ccd2_acisf04720_pi14-548_cl_sm2.00.img.gz, (364, 361) - (429, 427)
[Thu Feb 16 12:04:53 2012] Writing fullrun_ccd2_acisf04720_pi14-548_pass1_cl_src16.gif
[Thu Feb 16 12:09:06 2012] Size of ../../acisf04720/products/events/fullrun_ccd2_acisf04720_pi14-548_pass1_cl_src16_src.evt.gz[events] = 1 counts
[Thu Feb 16 12:09:06 2012] Mean chipx,y = (577.00, 895.00)
[Thu Feb 16 12:09:06 2012] Mean tdetx,y = (3956.00, 3509.00)
[Thu Feb 16 12:09:06 2012] chipx,y range = (577.00-577.00, 895.00-895.00)
[Thu Feb 16 12:09:06 2012] ../../acisf04720/products/events/fullrun_ccd2_acisf04720_pi14-548_pass1_cl_src16_bgd.evt.gz[events] does not have any counts, not extracting spectra.
[Thu Feb 16 12:09:28 2012] No arf file found
[Thu Feb 16 12:17:40 2012] Updating aperture counts using extracted products
[Thu Feb 16 12:17:40 2012] Error reading totcts from fullrun_ccd2_acisf04720_pi14-548_pass1_cl_src16_src.pi
[Thu Feb 16 12:17:40 2012] No arf file for this source, not re-computing flux
[Thu Feb 16 12:17:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Feb 16 12:17:47 2012] acisf04720/analysis//spectral/fullrun_ccd2_acisf04720_pi14-548_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete