[Sun Oct  9 02:04:07 2011] Detection parameters:
  Position = (833.8, 161.9) = 17 45 43.78 -28 59 46.8
  Extent = 0.7" x 0.5", rotation angle = 57 degrees
  Source counts = 70.1 +/- 10.2
  Background counts = 33.9
  Rate = 0.001 +/- 0.0002

[Sun Oct  9 02:04:19 2011] Off-axis axis estimate = 1.29'
[Sun Oct  9 02:06:43 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 02:06:43 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Oct  9 02:06:43 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.610
[Sun Oct  9 02:06:43 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.38"
[Sun Oct  9 02:06:49 2011] fullrun_ccd3_acisf04683_pi14-548_cl_pass0_src20.ximg exists
[Sun Oct  9 02:06:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04683_pi14-548_cl_pass0_src20.csv
[Sun Oct  9 02:06:49 2011] fullrun_ccd3_acisf04683_pi14-548_cl_pass0_src20_1.ximg exists
[Sun Oct  9 02:06:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04683_pi14-548_cl_pass0_src20.csv
[Sun Oct  9 02:06:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04683_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04683_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 02:06:52 2011] fullrun_ccd3_acisf04683_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Sun Oct  9 02:06:52 2011] fullrun_ccd3_acisf04683_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Oct  9 02:06:52 2011] Fit fullrun_ccd3_acisf04683_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Sun Oct  9 02:07:51 2011] Spatial fit model total counts = 299.996000, observed total counts = 300.000000
[Sun Oct  9 02:07:51 2011] Offset between fit and detection position for source 9 = 0.694367 pixels
[Sun Oct  9 02:07:51 2011] 294.314300 total counts/ 241.840000 bgd. counts: snr = 3.374291
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.694367 pixels
  Position = (834.3, 162.3) = 17 45 43.78 -28 59 46.8
  Extent = 0.3 (0.3-0.5)", rotation angle = 0
  Source counts = 52.5 +/- 17.2
  Background counts = 241.8
  Rate = 0.001 +/- 0.0003
[Sun Oct  9 02:07:52 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 02:07:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 02:07:52 2011] Assessing source extent using major axis lower bound
[Sun Oct  9 02:07:52 2011] Source does appear to be extended
[Sun Oct  9 02:07:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 02:08:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  9 02:08:53 2011] Initial guess for spatial extent in simple fitting = 0.35"
[Sun Oct  9 02:08:53 2011] source mask rpix=0.7, npix_max = 5, mask sum = 9, frac = 1.541
[Sun Oct  9 02:08:53 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.35"
[Sun Oct  9 02:08:55 2011] fullrun_ccd3_acisf04683_pi14-548_cl_pass1_src18.ximg exists
[Sun Oct  9 02:08:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04683_pi14-548_cl_pass1_src18.csv
[Sun Oct  9 02:08:55 2011] fullrun_ccd3_acisf04683_pi14-548_cl_pass1_src18_1.ximg exists
[Sun Oct  9 02:08:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04683_pi14-548_cl_pass1_src18.csv
[Sun Oct  9 02:08:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04683_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04683_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 02:08:59 2011] fullrun_ccd3_acisf04683_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Sun Oct  9 02:08:59 2011] fullrun_ccd3_acisf04683_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Oct  9 02:08:59 2011] Fit fullrun_ccd3_acisf04683_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Sun Oct  9 02:09:34 2011] Spatial fit model total counts = 299.908000, observed total counts = 300.000000
[Sun Oct  9 02:09:34 2011] Offset between fit and detection position for source 9 = 0.005963 pixels
[Sun Oct  9 02:09:34 2011] 294.222600 total counts/ 241.363000 bgd. counts: snr = 3.402425
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.005963 pixels
  Position = (834.3, 162.3) = 17 45 43.78 -28 59 46.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 52.9 +/- 17.2
  Background counts = 241.4
  Rate = 0.001 +/- 0.0003
[Sun Oct  9 02:09:34 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 02:09:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 02:09:34 2011] Assessing source extent using major axis lower bound
[Sun Oct  9 02:09:34 2011] Source does appear to be extended
[Sun Oct  9 02:09:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 02:28:51 2011] Not overwriting source region fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9_src.reg
[Sun Oct  9 02:28:51 2011] Extracting stamp from image fullrun_ccd3_acisf04683_pi14-548_cl_sm2.00.img.gz, (818, 146) - (851, 179)
[Sun Oct  9 02:28:51 2011] Writing fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9.gif
[Sun Oct  9 02:31:17 2011] ../../acisf04683/products/events/fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9_src.evt and ../../acisf04683/products/events/fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Oct  9 02:31:17 2011] Size of ../../acisf04683/products/events/fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9_src.evt.gz[events] = 80 counts
[Sun Oct  9 02:31:17 2011] Mean chipx,y = (832.67, 921.75)
[Sun Oct  9 02:31:17 2011] Mean tdetx,y = (4210.25, 3893.68)
[Sun Oct  9 02:31:17 2011] chipx,y range = (813.00-849.00, 905.00-939.00)
[Sun Oct  9 02:31:17 2011] Size of ../../acisf04683/products/events/fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 294 counts
[Sun Oct  9 02:31:17 2011] ../../acisf04683/products/images/fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9_src.img and ../../acisf04683/products/images/fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Oct  9 02:31:17 2011] Not generating rmf since there are only 52 counts
[Sun Oct  9 02:31:17 2011] arf not found, will run specextract
[Sun Oct  9 02:31:19 2011] ../../acisf04683/products/spectra/fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9_bkg.pi not found
[Sun Oct  9 02:31:19 2011] ../../acisf04683/products/spectra/fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9.warf not found
[Sun Oct  9 02:31:19 2011] ../../acisf04683/products/spectra/fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9.wrmf not found
[Sun Oct  9 02:31:19 2011] Removal of ../../acisf04683/products/spectra/fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9.soff failed
[Sun Oct  9 02:31:19 2011] Failed to rename ../../acisf04683/products/spectra/fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9_grp.pi to ../../acisf04683/products/spectra/fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9_src.pi
[Sun Oct  9 02:31:25 2011] ../../acisf04683/products/lightcurves/fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9_src.lc and ../../acisf04683/products/lightcurves/fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Oct  9 02:36:59 2011] No arf file found
[Sun Oct  9 02:37:17 2011] Updating aperture counts using extracted products
[Sun Oct  9 02:37:17 2011] Error reading totcts from fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9_src.pi
[Sun Oct  9 02:37:18 2011] No arf file for this source, not re-computing flux
[Sun Oct  9 02:37:29 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct  9 02:37:30 2011] acisf04683/analysis//spectral/fullrun_ccd3_acisf04683_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete