[Mon Feb 27 20:53:10 2012] Detection parameters:
  Position = (933.6, 428.1) = 0 42 40.19 41 18 45.5
  Extent = 0.6" x 0.5", rotation angle = 16 degrees
  Source counts = 17.9 +/- 4.2
  Background counts = 0.1
  Rate = 0.004 +/- 0.001

[Mon Feb 27 20:53:11 2012] Off-axis axis estimate = 3.49'
[Mon Feb 27 21:39:50 2012] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 21:39:50 2012] Initial guess for spatial extent in simple fitting = 0.69"
[Mon Feb 27 21:39:50 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.104
[Mon Feb 27 21:39:50 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 0.69"
[Mon Feb 27 22:17:21 2012] fullrun_ccd3_acisf04680_pi14-548_cl_pass0_src27.ximg exists
[Mon Feb 27 22:17:21 2012] Warning: total counts is not > 0
[Mon Feb 27 22:17:21 2012] fullrun_ccd3_acisf04680_pi14-548_cl_pass0_src27_1.ximg exists
[Mon Feb 27 22:17:21 2012] Warning: total counts is not > 0
[Mon Feb 27 22:17:21 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04680_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04680_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 22:17:21 2012] fullrun_ccd3_acisf04680_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Mon Feb 27 22:17:21 2012] Warning: total counts is not > 0
[Mon Feb 27 22:17:21 2012] fullrun_ccd3_acisf04680_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Feb 27 22:17:21 2012] Warning: total counts is not > 0
[Mon Feb 27 22:17:21 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04680_pi14-548_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04680_pi14-548_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 22:40:58 2012] Source 31 is offset by 4.975779 and -0.793840 pixels which is larger than
2 X fitted extent = 0.701886 x 0.701886, not incorporating fit results
[Mon Feb 27 22:40:58 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 22:40:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 22:40:58 2012] Assessing source extent using major
[Mon Feb 27 22:40:58 2012] Source does appear to be extended
[Mon Feb 27 22:40:58 2012] Computing asymmetry using major and minor axis, asym = 1.31
[Mon Feb 27 23:12:58 2012] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 23:12:58 2012] Initial guess for spatial extent in simple fitting = 0.69"
[Mon Feb 27 23:12:58 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.104
[Mon Feb 27 23:12:58 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 0.69"
[Mon Feb 27 23:36:22 2012] fullrun_ccd3_acisf04680_pi14-548_cl_pass1_src18.ximg exists
[Mon Feb 27 23:36:22 2012] Warning: total counts is not > 0
[Mon Feb 27 23:36:22 2012] fullrun_ccd3_acisf04680_pi14-548_cl_pass1_src18_1.ximg exists
[Mon Feb 27 23:36:22 2012] Warning: total counts is not > 0
[Mon Feb 27 23:36:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04680_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04680_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 23:36:23 2012] fullrun_ccd3_acisf04680_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Mon Feb 27 23:36:23 2012] Warning: total counts is not > 0
[Mon Feb 27 23:36:23 2012] fullrun_ccd3_acisf04680_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Feb 27 23:36:23 2012] Warning: total counts is not > 0
[Mon Feb 27 23:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04680_pi14-548_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04680_pi14-548_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 23:54:30 2012] Source 31 is offset by 5.732324 and 1.364235 pixels which is larger than
2 X fitted extent = 0.701886 x 0.701886, not incorporating fit results
[Mon Feb 27 23:54:30 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 23:54:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 23:54:30 2012] Assessing source extent using major
[Mon Feb 27 23:54:30 2012] Source does appear to be extended
[Mon Feb 27 23:54:30 2012] Computing asymmetry using major and minor axis, asym = 1.31
[Tue Feb 28 00:04:00 2012] Writing source region out to fullrun_ccd3_acisf04680_pi14-548_pass1_cl_src31_src.reg
[Tue Feb 28 00:04:00 2012] Extracting stamp from image fullrun_ccd3_acisf04680_pi14-548_cl_sm2.00.img.gz, (904, 399) - (963, 458)
[Tue Feb 28 00:04:00 2012] Writing fullrun_ccd3_acisf04680_pi14-548_pass1_cl_src31.gif
[Tue Feb 28 00:09:34 2012] ../../acisf04680/products/events/fullrun_ccd3_acisf04680_pi14-548_pass1_cl_src31_src.evt.gz[events] does not have any counts, not extracting products.
[Tue Feb 28 00:11:23 2012] No arf file found
[Tue Feb 28 00:11:45 2012] Updating aperture counts using extracted products
[Tue Feb 28 00:11:45 2012] Error reading totcts from fullrun_ccd3_acisf04680_pi14-548_pass1_cl_src31_src.pi
[Tue Feb 28 00:11:45 2012] No arf file for this source, not re-computing flux
[Tue Feb 28 00:11:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Feb 28 00:11:55 2012] acisf04680/analysis//spectral/fullrun_ccd3_acisf04680_pi14-548_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete