[Mon Feb 27 20:53:10 2012] Detection parameters:
  Position = (849.6, 152.4) = 0 42 43.85 41 16 29.9
  Extent = 0.6" x 0.5", rotation angle = 119 degrees
  Source counts = 59.8 +/- 7.9
  Background counts = 3.2
  Rate = 0.01 +/- 0.002

[Mon Feb 27 20:53:11 2012] Off-axis axis estimate = 1.14'
[Mon Feb 27 21:39:50 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 21:39:50 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Feb 27 21:39:50 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.386
[Mon Feb 27 21:39:50 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 0.38"
[Mon Feb 27 22:17:21 2012] fullrun_ccd3_acisf04680_pi14-548_cl_pass0_src15.ximg exists
[Mon Feb 27 22:17:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04680_pi14-548_cl_pass0_src15.csv
[Mon Feb 27 22:17:21 2012] fullrun_ccd3_acisf04680_pi14-548_cl_pass0_src15_1.ximg exists
[Mon Feb 27 22:17:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04680_pi14-548_cl_pass0_src15.csv
[Mon Feb 27 22:17:21 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04680_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04680_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 22:17:21 2012] fullrun_ccd3_acisf04680_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Mon Feb 27 22:17:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04680_pi14-548_cl_pass0_tfrozen_src15.csv
[Mon Feb 27 22:17:21 2012] fullrun_ccd3_acisf04680_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Feb 27 22:17:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04680_pi14-548_cl_pass0_tfrozen_src15.csv
[Mon Feb 27 22:17:21 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04680_pi14-548_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04680_pi14-548_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 22:40:58 2012] Spatial fit model total counts = 2.924920, observed total counts = 5.000000
[Mon Feb 27 22:40:58 2012] Offset between fit and detection position for source 20 = 1.008562 pixels
[Mon Feb 27 22:40:58 2012] 4.190036 total counts/ 4.189990 bgd. counts: snr = 0.000022
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.008562 pixels
  Position = (849.0, 153.2) = 0 42 43.90 41 16 30.0
  Extent = 1.3 (1.0-1.5)", rotation angle = 0
  Source counts = 0.0 +/- 2.0
  Background counts = 4.2
  Rate = 3e-07 +/- 0.01
  Deleting source due to low Poisson probability