[Mon Feb 27 20:53:07 2012] Detection parameters:
  Position = (887.2, 980.9) = 0 42 58.31 41 15 29.5
  Extent = 0.5" x 0.5", rotation angle = 67 degrees
  Source counts = 15.8 +/- 4.0
  Background counts = 0.2
  Rate = 0.004 +/- 0.001

[Mon Feb 27 20:53:07 2012] Off-axis axis estimate = 2.53'
[Mon Feb 27 21:27:55 2012] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 21:27:55 2012] Initial guess for spatial extent in simple fitting = 0.50"
[Mon Feb 27 21:27:55 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.988
[Mon Feb 27 21:27:55 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 0.50"
[Mon Feb 27 21:39:50 2012] fullrun_ccd2_acisf04680_pi14-548_cl_pass0_src8.ximg exists
[Mon Feb 27 21:39:50 2012] Warning: total counts is not > 0
[Mon Feb 27 21:39:50 2012] fullrun_ccd2_acisf04680_pi14-548_cl_pass0_src8_1.ximg exists
[Mon Feb 27 21:39:50 2012] Warning: total counts is not > 0
[Mon Feb 27 21:39:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04680_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04680_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 21:39:50 2012] fullrun_ccd2_acisf04680_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Mon Feb 27 21:39:50 2012] Warning: total counts is not > 0
[Mon Feb 27 21:39:50 2012] fullrun_ccd2_acisf04680_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Feb 27 21:39:50 2012] Warning: total counts is not > 0
[Mon Feb 27 21:39:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04680_pi14-548_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04680_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 22:40:54 2012] Source 8 is offset by 2.730935 and 3.368313 pixels which is larger than
2 X fitted extent = 0.504524 x 0.504524, not incorporating fit results
[Mon Feb 27 22:40:54 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 22:40:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 22:40:54 2012] Assessing source extent using major
[Mon Feb 27 22:40:54 2012] Source does appear to be extended
[Mon Feb 27 22:40:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 23:04:28 2012] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 23:04:28 2012] Initial guess for spatial extent in simple fitting = 0.50"
[Mon Feb 27 23:04:28 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.988
[Mon Feb 27 23:04:28 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.50"
[Mon Feb 27 23:12:58 2012] fullrun_ccd2_acisf04680_pi14-548_cl_pass1_src5.ximg exists
[Mon Feb 27 23:12:58 2012] Warning: total counts is not > 0
[Mon Feb 27 23:12:58 2012] fullrun_ccd2_acisf04680_pi14-548_cl_pass1_src5_1.ximg exists
[Mon Feb 27 23:12:58 2012] Warning: total counts is not > 0
[Mon Feb 27 23:12:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04680_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04680_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 23:12:58 2012] fullrun_ccd2_acisf04680_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Mon Feb 27 23:12:58 2012] Warning: total counts is not > 0
[Mon Feb 27 23:12:58 2012] fullrun_ccd2_acisf04680_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Feb 27 23:12:58 2012] Warning: total counts is not > 0
[Mon Feb 27 23:12:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04680_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04680_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 23:54:27 2012] Source 8 is offset by 3.749695 and -1.635163 pixels which is larger than
2 X fitted extent = 0.504524 x 0.504524, not incorporating fit results
[Mon Feb 27 23:54:27 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 23:54:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 23:54:27 2012] Assessing source extent using major
[Mon Feb 27 23:54:27 2012] Source does appear to be extended
[Mon Feb 27 23:54:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 00:00:29 2012] Writing source region out to fullrun_ccd2_acisf04680_pi14-548_pass1_cl_src8_src.reg
[Tue Feb 28 00:00:29 2012] Extracting stamp from image fullrun_ccd2_acisf04680_pi14-548_cl_sm2.00.img.gz, (865, 958) - (910, 1003)
[Tue Feb 28 00:00:29 2012] Writing fullrun_ccd2_acisf04680_pi14-548_pass1_cl_src8.gif
[Tue Feb 28 00:02:59 2012] ../../acisf04680/products/events/fullrun_ccd2_acisf04680_pi14-548_pass1_cl_src8_src.evt.gz[events] does not have any counts, not extracting products.
[Tue Feb 28 00:03:59 2012] No arf file found
[Tue Feb 28 00:11:45 2012] Updating aperture counts using extracted products
[Tue Feb 28 00:11:45 2012] Error reading totcts from fullrun_ccd2_acisf04680_pi14-548_pass1_cl_src8_src.pi
[Tue Feb 28 00:11:45 2012] No arf file for this source, not re-computing flux
[Tue Feb 28 00:11:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Feb 28 00:11:54 2012] acisf04680/analysis//spectral/fullrun_ccd2_acisf04680_pi14-548_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete