[Mon Feb 27 20:53:04 2012] Detection parameters:
  Position = (33.6, 341.8) = 0 42 38.58 41 16 3.9
  Extent = 0.5" x 0.5", rotation angle = 18 degrees
  Source counts = 998.3 +/- 31.7
  Background counts = 8.7
  Rate = 0.2 +/- 0.008

[Mon Feb 27 20:53:05 2012] Off-axis axis estimate = 1.37'
[Mon Feb 27 21:10:29 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 21:10:29 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Feb 27 21:10:29 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.360
[Mon Feb 27 21:10:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Mon Feb 27 21:27:55 2012] fullrun_ccd1_acisf04680_pi14-548_cl_pass0_src1.ximg exists
[Mon Feb 27 21:27:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04680_pi14-548_cl_pass0_src1.csv
[Mon Feb 27 21:27:55 2012] fullrun_ccd1_acisf04680_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Feb 27 21:27:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04680_pi14-548_cl_pass0_src1.csv
[Mon Feb 27 21:27:55 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04680_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04680_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 21:27:55 2012] fullrun_ccd1_acisf04680_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 27 21:27:55 2012] fullrun_ccd1_acisf04680_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 27 21:27:55 2012] Fit fullrun_ccd1_acisf04680_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 27 22:40:53 2012] Spatial fit model total counts = 72.001900, observed total counts = 77.000000
[Mon Feb 27 22:40:53 2012] Offset between fit and detection position for source 1 = 0.742519 pixels
[Mon Feb 27 22:40:53 2012] 72.682722 total counts/ 0.943222 bgd. counts: snr = 73.867157
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.742519 pixels
  Position = (34.1, 342.3) = 0 42 38.57 41 16 4.0
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 71.7 +/- 8.5
  Background counts = 0.9
  Rate = 0.5 +/- 0.06
[Mon Feb 27 22:40:53 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 22:40:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 22:40:53 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 22:40:53 2012] Source does appear to be extended
[Mon Feb 27 22:40:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 22:50:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 27 22:50:24 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Feb 27 22:50:24 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.904
[Mon Feb 27 22:50:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.39"
[Mon Feb 27 23:04:27 2012] fullrun_ccd1_acisf04680_pi14-548_cl_pass1_src1.ximg exists
[Mon Feb 27 23:04:27 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf04680_pi14-548_cl_pass1_src1.csv
[Mon Feb 27 23:04:27 2012] fullrun_ccd1_acisf04680_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Feb 27 23:04:27 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf04680_pi14-548_cl_pass1_src1.csv
[Mon Feb 27 23:04:27 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04680_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04680_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 23:04:27 2012] fullrun_ccd1_acisf04680_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 27 23:04:27 2012] fullrun_ccd1_acisf04680_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 27 23:04:27 2012] Fit fullrun_ccd1_acisf04680_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 27 23:54:27 2012] Spatial fit model total counts = 72.557900, observed total counts = 76.000000
[Mon Feb 27 23:54:27 2012] Offset between fit and detection position for source 1 = 0.018792 pixels
[Mon Feb 27 23:54:27 2012] 73.434633 total counts/ 0.436533 bgd. counts: snr = 110.484923
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.018792 pixels
  Position = (34.1, 342.3) = 0 42 38.57 41 16 3.9
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 73.0 +/- 8.6
  Background counts = 0.4
  Rate = 0.5 +/- 0.06
[Mon Feb 27 23:54:27 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 23:54:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 23:54:27 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 23:54:27 2012] Source does appear to be extended
[Mon Feb 27 23:54:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 23:56:15 2012] Writing source region out to fullrun_ccd1_acisf04680_pi14-548_pass1_cl_src1_src.reg
[Mon Feb 27 23:56:15 2012] Extracting stamp from image fullrun_ccd1_acisf04680_pi14-548_cl_sm2.00.img.gz, (17, 325) - (52, 360)
[Mon Feb 27 23:56:15 2012] Writing fullrun_ccd1_acisf04680_pi14-548_pass1_cl_src1.gif
[Mon Feb 27 23:56:17 2012] Size of ../../acisf04680/products/events/fullrun_ccd1_acisf04680_pi14-548_pass1_cl_src1_src.evt.gz[events] = 74 counts
[Mon Feb 27 23:56:17 2012] Mean chipx,y = (33.51, 892.28)
[Mon Feb 27 23:56:17 2012] Mean tdetx,y = (4239.72, 4140.51)
[Mon Feb 27 23:56:17 2012] chipx,y range = (15.00-49.00, 875.00-909.00)
[Mon Feb 27 23:56:17 2012] Size of ../../acisf04680/products/events/fullrun_ccd1_acisf04680_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1 counts
[Mon Feb 27 23:56:18 2012] Not generating rmf since there are only 72 counts
[Mon Feb 27 23:56:18 2012] arf not found, will run specextract
[Mon Feb 27 23:56:43 2012] ../../acisf04680/products/spectra/fullrun_ccd1_acisf04680_pi14-548_pass1_cl_src1.warf not found
[Mon Feb 27 23:56:43 2012] ../../acisf04680/products/spectra/fullrun_ccd1_acisf04680_pi14-548_pass1_cl_src1.wrmf not found
[Mon Feb 27 23:56:43 2012] Removal of ../../acisf04680/products/spectra/fullrun_ccd1_acisf04680_pi14-548_pass1_cl_src1.soff failed
[Tue Feb 28 00:00:29 2012] Spectrum 1 has only 73 counts, deleting rmf
[Tue Feb 28 00:00:29 2012] 209.528
[Tue Feb 28 00:11:44 2012] Updating aperture counts using extracted products
[Tue Feb 28 00:11:44 2012] Error reading totcts from fullrun_ccd1_acisf04680_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Feb 28 00:11:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 00:11:44 2012] Using photon index=1.80, rate=0.471, arf fullrun_ccd1_acisf04680_pi14-548_pass1_cl_src1.arf
[Tue Feb 28 00:11:44 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 00:11:44 2012] Updating source flux to 4.9e-12
[Tue Feb 28 00:11:52 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 28 00:11:53 2012] acisf04680/analysis//spectral/fullrun_ccd1_acisf04680_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete