[Sat Oct 22 22:12:58 2011] Detection parameters:
  Position = (325.6, 989.8) = 11 28 4.29 56 56 15.4
  Extent = 2.3" x 1.2", rotation angle = 95 degrees
  Source counts = 106.3 +/- 11.0
  Background counts = 14.7
  Rate = 0.003 +/- 0.0003

[Sat Oct 22 22:13:00 2011] Off-axis axis estimate = 6.40'
[Sat Oct 22 22:13:48 2011] Using EEF radius (= 1.84 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 22:13:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 22:13:48 2011] Initial guess for spatial extent in simple fitting = 1.84"
[Sat Oct 22 22:13:48 2011] source mask rpix=3.7, npix_max = 71, mask sum = 72, frac = 1.003
[Sat Oct 22 22:13:48 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.84"
[Sat Oct 22 22:13:48 2011] fullrun_ccd7_acisf04659_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct 22 22:13:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04659_pi14-548_cl_pass0_src3.csv
[Sat Oct 22 22:13:48 2011] fullrun_ccd7_acisf04659_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct 22 22:13:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04659_pi14-548_cl_pass0_src3.csv
[Sat Oct 22 22:13:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04659_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04659_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 22:13:50 2011] fullrun_ccd7_acisf04659_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct 22 22:13:50 2011] fullrun_ccd7_acisf04659_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct 22 22:13:50 2011] Fit fullrun_ccd7_acisf04659_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Oct 22 22:14:06 2011] Spatial fit model total counts = 113.766000, observed total counts = 114.000000
[Sat Oct 22 22:14:06 2011] Offset between fit and detection position for source 30 = 1.122694 pixels
[Sat Oct 22 22:14:06 2011] 114.036800 total counts/ 22.548600 bgd. counts: snr = 19.266609
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.122694 pixels
  Position = (325.9, 990.9) = 11 28 4.30 56 56 15.7
  Extent = 1.7 (1.5-2.3)", rotation angle = 0
  Source counts = 91.5 +/- 10.7
  Background counts = 22.5
  Rate = 0.002 +/- 0.0003
[Sat Oct 22 22:14:06 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 22:14:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 22:14:06 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 22:14:06 2011] Source does appear to be extended
[Sat Oct 22 22:14:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 22:14:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 22:14:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 22:14:27 2011] Initial guess for spatial extent in simple fitting = 1.74"
[Sat Oct 22 22:14:27 2011] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.977
[Sat Oct 22 22:14:27 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.74"
[Sat Oct 22 22:14:29 2011] fullrun_ccd7_acisf04659_pi14-548_cl_pass1_src3.ximg exists
[Sat Oct 22 22:14:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04659_pi14-548_cl_pass1_src3.csv
[Sat Oct 22 22:14:29 2011] fullrun_ccd7_acisf04659_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Oct 22 22:14:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04659_pi14-548_cl_pass1_src3.csv
[Sat Oct 22 22:14:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04659_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04659_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 22:14:29 2011] fullrun_ccd7_acisf04659_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct 22 22:14:29 2011] fullrun_ccd7_acisf04659_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct 22 22:14:29 2011] Fit fullrun_ccd7_acisf04659_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Oct 22 22:14:41 2011] Spatial fit model total counts = 106.919000, observed total counts = 107.000000
[Sat Oct 22 22:14:41 2011] Offset between fit and detection position for source 30 = 0.207797 pixels
[Sat Oct 22 22:14:41 2011] 107.480100 total counts/ 13.931800 bgd. counts: snr = 25.062956
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.207797 pixels
  Position = (325.9, 990.7) = 11 28 4.30 56 56 15.6
  Extent = 1.8 (1.5-2.2)", rotation angle = 0
  Source counts = 93.5 +/- 10.4
  Background counts = 13.9
  Rate = 0.002 +/- 0.0003
[Sat Oct 22 22:14:41 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 22:14:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 22:14:41 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 22:14:41 2011] Source does appear to be extended
[Sat Oct 22 22:14:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 22:16:41 2011] Not overwriting source region fullrun_ccd7_acisf04659_pi14-548_pass1_cl_src30_src.reg
[Sat Oct 22 22:16:41 2011] Extracting stamp from image fullrun_ccd7_acisf04659_pi14-548_cl_sm2.00.img.gz, (246, 910) - (406, 1071)
[Sat Oct 22 22:16:41 2011] Writing fullrun_ccd7_acisf04659_pi14-548_pass1_cl_src30.gif
[Sat Oct 22 22:16:49 2011] ../../acisf04659/products/events/fullrun_ccd7_acisf04659_pi14-548_pass1_cl_src30_src.evt and ../../acisf04659/products/events/fullrun_ccd7_acisf04659_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Sat Oct 22 22:16:49 2011] Size of ../../acisf04659/products/events/fullrun_ccd7_acisf04659_pi14-548_pass1_cl_src30_src.evt.gz[events] = 117 counts
[Sat Oct 22 22:16:49 2011] Mean chipx,y = (978.61, 616.93)
[Sat Oct 22 22:16:49 2011] Mean tdetx,y = (4895.61, 2318.93)
[Sat Oct 22 22:16:49 2011] chipx,y range = (958.00-1003.00, 589.00-643.00)
[Sat Oct 22 22:16:49 2011] Size of ../../acisf04659/products/events/fullrun_ccd7_acisf04659_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 156 counts
[Sat Oct 22 22:16:49 2011] ../../acisf04659/products/images/fullrun_ccd7_acisf04659_pi14-548_pass1_cl_src30_src.img and ../../acisf04659/products/images/fullrun_ccd7_acisf04659_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Sat Oct 22 22:16:49 2011] ../../acisf04659/products/spectra/fullrun_ccd7_acisf04659_pi14-548_pass1_cl_src30_src.pi and ../../acisf04659/products/spectra/fullrun_ccd7_acisf04659_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Sat Oct 22 22:16:49 2011] Not generating rmf since there are only 93 counts
[Sat Oct 22 22:16:52 2011] ../../acisf04659/products/lightcurves/fullrun_ccd7_acisf04659_pi14-548_pass1_cl_src30_src.lc and ../../acisf04659/products/lightcurves/fullrun_ccd7_acisf04659_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Sat Oct 22 22:18:52 2011] 202.729
[Sat Oct 22 22:18:56 2011] Updating aperture counts using extracted products
[Sat Oct 22 22:18:56 2011] Error reading totcts from fullrun_ccd7_acisf04659_pi14-548_pass1_cl_src30_src.pi.gz
[Sat Oct 22 22:18:56 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 22:18:56 2011] Using photon index=1.80, rate=0.00236, arf fullrun_ccd7_acisf04659_pi14-548_pass1_cl_src30.arf
[Sat Oct 22 22:18:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 22:18:56 2011] Updating source flux to 1.8e-14
[Sat Oct 22 22:19:10 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting