[Sun Oct  2 23:49:05 2011] Detection parameters:
  Position = (356.8, 1068.4) = 19 14 13.72 9 54 5.2
  Extent = 0.6" x 0.5", rotation angle = 89 degrees
  Source counts = 10.8 +/- 3.5
  Background counts = 1.2
  Rate = 0.0005 +/- 0.0002

[Sun Oct  2 23:49:06 2011] Off-axis axis estimate = 3.94'
[Sun Oct  2 23:49:45 2011] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 23:49:45 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Sun Oct  2 23:49:45 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.083
[Sun Oct  2 23:49:45 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.81"
[Sun Oct  2 23:49:46 2011] fullrun_ccd7_acisf04590_pi14-548_cl_pass0_src8.ximg exists
[Sun Oct  2 23:49:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04590_pi14-548_cl_pass0_src8.csv
[Sun Oct  2 23:49:46 2011] fullrun_ccd7_acisf04590_pi14-548_cl_pass0_src8_1.ximg exists
[Sun Oct  2 23:49:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04590_pi14-548_cl_pass0_src8.csv
[Sun Oct  2 23:49:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04590_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04590_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 23:49:46 2011] fullrun_ccd7_acisf04590_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Sun Oct  2 23:49:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04590_pi14-548_cl_pass0_tfrozen_src8.csv
[Sun Oct  2 23:49:46 2011] fullrun_ccd7_acisf04590_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Oct  2 23:49:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04590_pi14-548_cl_pass0_tfrozen_src8.csv
[Sun Oct  2 23:49:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04590_pi14-548_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04590_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 23:49:52 2011] Spatial fit model total counts = 11.526400, observed total counts = 13.000000
[Sun Oct  2 23:49:52 2011] Offset between fit and detection position for source 8 = 1.009480 pixels
[Sun Oct  2 23:49:52 2011] 11.474100 total counts/ 0.000000 bgd. counts: snr = 188903572066094.437500
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.009480 pixels
  Position = (357.4, 1069.2) = 19 14 13.71 9 54 5.3
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 11.5 +/- 3.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sun Oct  2 23:49:52 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 23:49:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 23:49:52 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 23:49:52 2011] Source does appear to be extended
[Sun Oct  2 23:49:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 23:49:52 2011] Deleting source due to low Poisson probability 0.9