[Fri Feb 24 12:32:22 2012] Detection parameters:
  Position = (850.1, 356.1) = 16 40 24.00 -48 53 33.6
  Extent = 0.7" x 0.5", rotation angle = 134 degrees
  Source counts = 33.2 +/- 6.0
  Background counts = 2.8
  Rate = 0.0004 +/- 7e-05

[Fri Feb 24 12:32:30 2012] Off-axis axis estimate = 4.48'
[Fri Feb 24 16:41:54 2012] Using EEF radius (= 0.99 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 16:41:54 2012] Initial guess for spatial extent in simple fitting = 0.99"
[Fri Feb 24 16:41:54 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.995
[Fri Feb 24 16:41:54 2012] Giving source the simple spatial ID 91 for pass 0, mean size = 0.99"
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src91.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src91.csv
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src91_1.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src91.csv
[Fri Feb 24 18:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src91.ximg exists
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src91_1.ximg exists
[Fri Feb 24 18:58:09 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src91 appears to have run properly
[Fri Feb 24 21:26:28 2012] Warning: source 91 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 82 at 12.111308 pixels away
[Fri Feb 24 21:26:28 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:28 2012] Assessing source extent using major
[Fri Feb 24 21:26:28 2012] Source does appear to be extended
[Fri Feb 24 21:26:28 2012] Computing asymmetry using major and minor axis, asym = 1.48
[Sat Feb 25 01:25:05 2012] Using EEF radius (= 0.99 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 01:25:05 2012] Initial guess for spatial extent in simple fitting = 0.99"
[Sat Feb 25 01:25:05 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.995
[Sat Feb 25 01:25:05 2012] Giving source the simple spatial ID 91 for pass 1, mean size = 0.99"
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src91.ximg exists
[Sat Feb 25 03:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src91.csv
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src91_1.ximg exists
[Sat Feb 25 03:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src91.csv
[Sat Feb 25 03:23:01 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src91_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 03:23:02 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src91.ximg exists
[Sat Feb 25 03:23:02 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src91_1.ximg exists
[Sat Feb 25 03:23:02 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src91 appears to have run properly
[Sat Feb 25 05:43:16 2012] Spatial fit model total counts = 102.444000, observed total counts = 103.000000
[Sat Feb 25 05:43:16 2012] Offset between fit and detection position for source 82 = 3.043010 pixels
[Sat Feb 25 05:43:16 2012] 85.020700 total counts/ 0.000000 bgd. counts: snr = 3839132160004541.000000
Spatial fit parameters:
  Offset between fit and detection position for source 82 = 3.043010 pixels
  Position = (847.1, 355.6) = 16 40 24.18 -48 53 34.0
  Extent = 1.4 (1.3-1.7)", rotation angle = 0
  Source counts = 85.0 +/- 9.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0001
[Sat Feb 25 05:43:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:43:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:43:16 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:43:16 2012] Source does appear to be extended
[Sat Feb 25 05:43:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 05:43:16 2012] Source is confused with source 80
[Sat Feb 25 06:15:38 2012] Writing source region out to fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src82_src.reg
[Sat Feb 25 06:15:38 2012] Extracting stamp from image fullrun_ccd3_acisf04503_pi14-548_cl_sm2.00.img.gz, (782, 291) - (912, 420)
[Sat Feb 25 06:15:38 2012] Writing fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src82.gif
[Sat Feb 25 06:32:12 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src82_src.evt.gz[events] = 110 counts
[Sat Feb 25 06:32:12 2012] Mean chipx,y = (420.31, 889.31)
[Sat Feb 25 06:32:12 2012] Mean tdetx,y = (4242.69, 3481.31)
[Sat Feb 25 06:32:12 2012] chipx,y range = (396.00-444.00, 870.00-910.00)
[Sat Feb 25 06:32:12 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src82_bgd.evt.gz[events] = 155 counts
[Sat Feb 25 06:32:13 2012] Not generating rmf since there are only 85 counts
[Sat Feb 25 06:32:13 2012] arf not found, will run specextract
[Sat Feb 25 06:32:15 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src82_bkg.pi not found
[Sat Feb 25 06:32:15 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src82.warf not found
[Sat Feb 25 06:32:15 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src82.wrmf not found
[Sat Feb 25 06:32:15 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src82.soff failed
[Sat Feb 25 06:32:15 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src82_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src82_src.pi
[Sat Feb 25 06:45:37 2012] No arf file found
[Sat Feb 25 06:49:14 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:15 2012] Error reading totcts from fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src82_src.pi
[Sat Feb 25 06:49:16 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:32 2012] Flag c found in src. 82 procflags, skipping spectral fitting
[Sat Feb 25 06:49:32 2012] Source 82 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:33 2012] acisf04503/analysis//spectral/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src82_pl.csv not found, spectral fit skipped or did not complete