[Fri Feb 24 12:32:21 2012] Detection parameters:
  Position = (690.5, 885.2) = 16 40 31.92 -48 49 13.1
  Extent = 1.0" x 0.8", rotation angle = 131 degrees
  Source counts = 39.3 +/- 7.0
  Background counts = 9.7
  Rate = 0.0004 +/- 8e-05

[Fri Feb 24 12:32:30 2012] Off-axis axis estimate = 6.09'
[Fri Feb 24 16:41:54 2012] Using EEF radius (= 1.68 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 16:41:54 2012] Initial guess for spatial extent in simple fitting = 1.68"
[Fri Feb 24 16:41:54 2012] source mask rpix=3.4, npix_max = 61, mask sum = 56, frac = 0.917
[Fri Feb 24 16:41:54 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 1.68"
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src79.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src79.csv
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src79_1.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src79.csv
[Fri Feb 24 18:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src79.ximg exists
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src79_1.ximg exists
[Fri Feb 24 18:58:09 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src79 appears to have run properly
[Fri Feb 24 21:26:28 2012] Spatial fit model total counts = 55.000000, observed total counts = 55.000000
[Fri Feb 24 21:26:28 2012] Offset between fit and detection position for source 72 = 1.442774 pixels
[Fri Feb 24 21:26:28 2012] 55.161300 total counts/ 30.343900 bgd. counts: snr = 4.505267
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 1.442774 pixels
  Position = (690.3, 886.6) = 16 40 31.95 -48 49 12.7
  Extent = 0.7 (0.5-1.5)", rotation angle = 0
  Source counts = 24.8 +/- 7.4
  Background counts = 30.3
  Rate = 0.0003 +/- 8e-05
[Fri Feb 24 21:26:28 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:28 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:28 2012] Source does appear to be extended
[Fri Feb 24 21:26:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 01:25:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 01:25:05 2012] Initial guess for spatial extent in simple fitting = 0.72"
[Sat Feb 25 01:25:05 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.039
[Sat Feb 25 01:25:05 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 0.72"
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src79.ximg exists
[Sat Feb 25 03:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src79.csv
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src79_1.ximg exists
[Sat Feb 25 03:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src79.csv
[Sat Feb 25 03:23:01 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src79.ximg exists
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src79_1.ximg exists
[Sat Feb 25 03:23:01 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src79 appears to have run properly
[Sat Feb 25 05:43:16 2012] Spatial fit model total counts = 46.283800, observed total counts = 46.000000
[Sat Feb 25 05:43:16 2012] Offset between fit and detection position for source 72 = 0.100565 pixels
[Sat Feb 25 05:43:16 2012] 48.134800 total counts/ 24.840000 bgd. counts: snr = 4.673941
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.100565 pixels
  Position = (690.2, 886.6) = 16 40 31.96 -48 49 12.7
  Extent = 0.7 (0.5-1.3)", rotation angle = 0
  Source counts = 23.3 +/- 6.9
  Background counts = 24.8
  Rate = 0.0003 +/- 8e-05
[Sat Feb 25 05:43:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:43:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:43:16 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:43:16 2012] Source does appear to be extended
[Sat Feb 25 05:43:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 06:15:38 2012] Writing source region out to fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src72_src.reg
[Sat Feb 25 06:15:38 2012] Extracting stamp from image fullrun_ccd3_acisf04503_pi14-548_cl_sm2.00.img.gz, (658, 855) - (722, 918)
[Sat Feb 25 06:15:38 2012] Writing fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src72.gif
[Sat Feb 25 06:30:05 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src72_src.evt.gz[events] = 35 counts
[Sat Feb 25 06:30:05 2012] Mean chipx,y = (585.91, 361.34)
[Sat Feb 25 06:30:05 2012] Mean tdetx,y = (4770.66, 3646.91)
[Sat Feb 25 06:30:05 2012] chipx,y range = (564.00-603.00, 342.00-379.00)
[Sat Feb 25 06:30:05 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src72_bgd.evt.gz[events] = 37 counts
[Sat Feb 25 06:30:06 2012] Not generating rmf since there are only 23 counts
[Sat Feb 25 06:30:06 2012] arf not found, will run specextract
[Sat Feb 25 06:30:08 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src72_bkg.pi not found
[Sat Feb 25 06:30:08 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src72.warf not found
[Sat Feb 25 06:30:08 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src72.wrmf not found
[Sat Feb 25 06:30:08 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src72.soff failed
[Sat Feb 25 06:30:08 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src72_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src72_src.pi
[Sat Feb 25 06:45:37 2012] No arf file found
[Sat Feb 25 06:49:14 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:14 2012] Error reading totcts from fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src72_src.pi
[Sat Feb 25 06:49:16 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:32 2012] Source 72 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:33 2012] acisf04503/analysis//spectral/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src72_pl.csv not found, spectral fit skipped or did not complete