[Fri Feb 24 12:32:20 2012] Detection parameters:
  Position = (835.6, 545.2) = 16 40 24.71 -48 52 0.5
  Extent = 0.7" x 0.5", rotation angle = 179 degrees
  Source counts = 64.7 +/- 8.2
  Background counts = 3.3
  Rate = 0.0007 +/- 9e-05

[Fri Feb 24 12:32:30 2012] Off-axis axis estimate = 4.28'
[Fri Feb 24 16:41:54 2012] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 16:41:54 2012] Initial guess for spatial extent in simple fitting = 0.92"
[Fri Feb 24 16:41:54 2012] source mask rpix=1.9, npix_max = 22, mask sum = 24, frac = 1.069
[Fri Feb 24 16:41:54 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 0.92"
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src55.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src55.csv
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src55_1.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src55.csv
[Fri Feb 24 18:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src55.ximg exists
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src55_1.ximg exists
[Fri Feb 24 18:58:09 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src55 appears to have run properly
[Fri Feb 24 21:26:28 2012] Spatial fit model total counts = 71.338000, observed total counts = 74.000000
[Fri Feb 24 21:26:28 2012] Offset between fit and detection position for source 60 = 0.462695 pixels
[Fri Feb 24 21:26:28 2012] 72.308760 total counts/ 9.168560 bgd. counts: snr = 20.852368
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.462695 pixels
  Position = (835.9, 545.6) = 16 40 24.72 -48 52 0.6
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 63.1 +/- 8.5
  Background counts = 9.2
  Rate = 0.0007 +/- 0.0001
[Fri Feb 24 21:26:28 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:28 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:28 2012] Source does appear to be extended
[Fri Feb 24 21:26:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 01:25:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 01:25:05 2012] Initial guess for spatial extent in simple fitting = 0.70"
[Sat Feb 25 01:25:05 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.817
[Sat Feb 25 01:25:05 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 0.70"
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src55.ximg exists
[Sat Feb 25 03:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src55.csv
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src55_1.ximg exists
[Sat Feb 25 03:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src55.csv
[Sat Feb 25 03:23:01 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src55.ximg exists
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src55_1.ximg exists
[Sat Feb 25 03:23:01 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src55 appears to have run properly
[Sat Feb 25 05:43:16 2012] Spatial fit model total counts = 72.190100, observed total counts = 74.000000
[Sat Feb 25 05:43:16 2012] Offset between fit and detection position for source 60 = 0.000411 pixels
[Sat Feb 25 05:43:16 2012] 73.160650 total counts/ 9.143150 bgd. counts: snr = 21.171459
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.000411 pixels
  Position = (835.9, 545.6) = 16 40 24.72 -48 52 0.6
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 64.0 +/- 8.6
  Background counts = 9.1
  Rate = 0.0007 +/- 0.0001
[Sat Feb 25 05:43:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:43:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:43:16 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:43:16 2012] Source does appear to be extended
[Sat Feb 25 05:43:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 06:15:37 2012] Writing source region out to fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src60_src.reg
[Sat Feb 25 06:15:37 2012] Extracting stamp from image fullrun_ccd3_acisf04503_pi14-548_cl_sm2.00.img.gz, (804, 513) - (868, 578)
[Sat Feb 25 06:15:37 2012] Writing fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src60.gif
[Sat Feb 25 06:25:44 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src60_src.evt.gz[events] = 68 counts
[Sat Feb 25 06:25:44 2012] Mean chipx,y = (513.40, 726.29)
[Sat Feb 25 06:25:44 2012] Mean tdetx,y = (4405.71, 3574.40)
[Sat Feb 25 06:25:44 2012] chipx,y range = (500.00-538.00, 708.00-744.00)
[Sat Feb 25 06:25:44 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src60_bgd.evt.gz[events] = 26 counts
[Sat Feb 25 06:25:45 2012] Not generating rmf since there are only 64 counts
[Sat Feb 25 06:25:45 2012] arf not found, will run specextract
[Sat Feb 25 06:25:47 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src60_bkg.pi not found
[Sat Feb 25 06:25:47 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src60.warf not found
[Sat Feb 25 06:25:47 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src60.wrmf not found
[Sat Feb 25 06:25:47 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src60.soff failed
[Sat Feb 25 06:25:47 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src60_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src60_src.pi
[Sat Feb 25 06:45:37 2012] No arf file found
[Sat Feb 25 06:49:14 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:14 2012] Error reading totcts from fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src60_src.pi
[Sat Feb 25 06:49:16 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:32 2012] Source 60 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:33 2012] acisf04503/analysis//spectral/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete