[Fri Feb 24 12:32:20 2012] Detection parameters:
  Position = (794.1, 1251.9) = 16 40 26.73 -48 46 12.8
  Extent = 1.3" x 1.1", rotation angle = 54 degrees
  Source counts = 96.1 +/- 10.7
  Background counts = 17.9
  Rate = 0.001 +/- 0.0001

[Fri Feb 24 12:32:30 2012] Off-axis axis estimate = 7.33'
[Fri Feb 24 16:41:54 2012] Using EEF radius (= 2.38 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 16:41:54 2012] Initial guess for spatial extent in simple fitting = 2.38"
[Fri Feb 24 16:41:54 2012] source mask rpix=4.8, npix_max = 114, mask sum = 100, frac = 0.877
[Fri Feb 24 16:41:54 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 2.38"
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src35.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src35.csv
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src35_1.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src35.csv
[Fri Feb 24 18:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Fri Feb 24 18:58:09 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly
[Fri Feb 24 21:26:28 2012] Spatial fit model total counts = 146.187000, observed total counts = 145.000000
[Fri Feb 24 21:26:28 2012] Offset between fit and detection position for source 49 = 0.688246 pixels
[Fri Feb 24 21:26:28 2012] 146.319400 total counts/ 59.723300 bgd. counts: snr = 11.205376
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.688246 pixels
  Position = (794.5, 1252.4) = 16 40 26.73 -48 46 12.8
  Extent = 1.6 (1.3-2.0)", rotation angle = 0
  Source counts = 86.6 +/- 12.1
  Background counts = 59.7
  Rate = 0.001 +/- 0.0001
[Fri Feb 24 21:26:28 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:28 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:28 2012] Source does appear to be extended
[Fri Feb 24 21:26:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 01:25:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 01:25:05 2012] Initial guess for spatial extent in simple fitting = 1.56"
[Sat Feb 25 01:25:05 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.914
[Sat Feb 25 01:25:05 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 1.56"
[Sat Feb 25 03:23:00 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src35.ximg exists
[Sat Feb 25 03:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src35.csv
[Sat Feb 25 03:23:00 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src35_1.ximg exists
[Sat Feb 25 03:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src35.csv
[Sat Feb 25 03:23:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Feb 25 03:23:01 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src35 appears to have run properly
[Sat Feb 25 05:43:16 2012] Spatial fit model total counts = 111.869000, observed total counts = 112.000000
[Sat Feb 25 05:43:16 2012] Offset between fit and detection position for source 49 = 0.162603 pixels
[Sat Feb 25 05:43:16 2012] 112.571800 total counts/ 32.766200 bgd. counts: snr = 13.941848
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.162603 pixels
  Position = (794.4, 1252.4) = 16 40 26.74 -48 46 12.8
  Extent = 1.5 (1.1-2.0)", rotation angle = 0
  Source counts = 79.8 +/- 10.6
  Background counts = 32.8
  Rate = 0.0009 +/- 0.0001
[Sat Feb 25 05:43:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:43:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:43:16 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:43:16 2012] Source does appear to be extended
[Sat Feb 25 05:43:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 06:15:36 2012] Writing source region out to fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src49_src.reg
[Sat Feb 25 06:15:36 2012] Extracting stamp from image fullrun_ccd3_acisf04503_pi14-548_cl_sm2.00.img.gz, (726, 1184) - (863, 1321)
[Sat Feb 25 06:15:36 2012] Writing fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src49.gif
[Sat Feb 25 06:21:53 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src49_src.evt.gz[events] = 123 counts
[Sat Feb 25 06:21:53 2012] Mean chipx,y = (875.24, 115.62)
[Sat Feb 25 06:21:53 2012] Mean tdetx,y = (5016.38, 3936.24)
[Sat Feb 25 06:21:53 2012] chipx,y range = (849.00-899.00, 91.00-140.00)
[Sat Feb 25 06:21:53 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src49_bgd.evt.gz[events] = 130 counts
[Sat Feb 25 06:21:54 2012] Not generating rmf since there are only 79 counts
[Sat Feb 25 06:21:54 2012] arf not found, will run specextract
[Sat Feb 25 06:21:56 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src49_bkg.pi not found
[Sat Feb 25 06:21:56 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src49.warf not found
[Sat Feb 25 06:21:56 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src49.wrmf not found
[Sat Feb 25 06:21:56 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src49.soff failed
[Sat Feb 25 06:21:56 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src49_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src49_src.pi
[Sat Feb 25 06:45:37 2012] No arf file found
[Sat Feb 25 06:49:14 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:14 2012] Error reading totcts from fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src49_src.pi
[Sat Feb 25 06:49:16 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:32 2012] Source 49 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:33 2012] acisf04503/analysis//spectral/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete