[Fri Feb 24 12:32:19 2012] Detection parameters:
  Position = (1332.6, 560.9) = 16 39 59.93 -48 51 53.0
  Extent = 0.5" x 0.5", rotation angle = 78 degrees
  Source counts = 78.5 +/- 9.4
  Background counts = 9.5
  Rate = 0.0009 +/- 0.0001

[Fri Feb 24 12:32:30 2012] Off-axis axis estimate = 0.21'
[Fri Feb 24 16:41:54 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 16:41:54 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Feb 24 16:41:54 2012] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.840
[Fri Feb 24 16:41:54 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 0.41"
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src45.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src45.csv
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src45_1.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src45.csv
[Fri Feb 24 18:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src45.ximg exists
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src45_1.ximg exists
[Fri Feb 24 18:58:09 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src45 appears to have run properly
[Fri Feb 24 21:26:28 2012] Spatial fit model total counts = 98.889400, observed total counts = 99.000000
[Fri Feb 24 21:26:28 2012] Offset between fit and detection position for source 35 = 0.737094 pixels
[Fri Feb 24 21:26:28 2012] 97.785000 total counts/ 13.944300 bgd. counts: snr = 22.452078
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.737094 pixels
  Position = (1333.2, 561.4) = 16 39 59.93 -48 51 53.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 83.8 +/- 9.9
  Background counts = 13.9
  Rate = 0.0009 +/- 0.0001
[Fri Feb 24 21:26:28 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:28 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:28 2012] Source does appear to be extended
[Fri Feb 24 21:26:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 01:25:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 01:25:05 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Sat Feb 25 01:25:05 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.876
[Sat Feb 25 01:25:05 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 0.40"
[Sat Feb 25 03:23:00 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src45.ximg exists
[Sat Feb 25 03:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src45.csv
[Sat Feb 25 03:23:00 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src45_1.ximg exists
[Sat Feb 25 03:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src45.csv
[Sat Feb 25 03:23:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src45.ximg exists
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src45_1.ximg exists
[Sat Feb 25 03:23:01 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src45 appears to have run properly
[Sat Feb 25 05:43:16 2012] Spatial fit model total counts = 98.605200, observed total counts = 99.000000
[Sat Feb 25 05:43:16 2012] Offset between fit and detection position for source 35 = 0.000784 pixels
[Sat Feb 25 05:43:16 2012] 97.531000 total counts/ 13.956300 bgd. counts: snr = 22.371220
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.000784 pixels
  Position = (1333.2, 561.4) = 16 39 59.93 -48 51 53.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 83.6 +/- 9.9
  Background counts = 14.0
  Rate = 0.0009 +/- 0.0001
[Sat Feb 25 05:43:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:43:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:43:16 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:43:16 2012] Source does appear to be extended
[Sat Feb 25 05:43:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 06:15:37 2012] Writing source region out to fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src35_src.reg
[Sat Feb 25 06:15:37 2012] Extracting stamp from image fullrun_ccd3_acisf04503_pi14-548_cl_sm2.00.img.gz, (1315, 543) - (1351, 579)
[Sat Feb 25 06:15:37 2012] Writing fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src35.gif
[Sat Feb 25 06:23:50 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src35_src.evt.gz[events] = 86 counts
[Sat Feb 25 06:23:50 2012] Mean chipx,y = (942.14, 989.20)
[Sat Feb 25 06:23:50 2012] Mean tdetx,y = (4142.80, 4003.14)
[Sat Feb 25 06:23:50 2012] chipx,y range = (924.00-958.00, 973.00-1008.00)
[Sat Feb 25 06:23:50 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 28 counts
[Sat Feb 25 06:23:51 2012] Not generating rmf since there are only 83 counts
[Sat Feb 25 06:23:51 2012] arf not found, will run specextract
[Sat Feb 25 06:23:53 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src35_bkg.pi not found
[Sat Feb 25 06:23:53 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src35.warf not found
[Sat Feb 25 06:23:53 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src35.wrmf not found
[Sat Feb 25 06:23:53 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src35.soff failed
[Sat Feb 25 06:23:53 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src35_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src35_src.pi
[Sat Feb 25 06:45:37 2012] No arf file found
[Sat Feb 25 06:49:14 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:14 2012] Error reading totcts from fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src35_src.pi
[Sat Feb 25 06:49:16 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:32 2012] Source 35 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:33 2012] acisf04503/analysis//spectral/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete