[Fri Feb 24 12:32:19 2012] Detection parameters:
  Position = (596.3, 510.8) = 16 40 36.65 -48 52 17.2
  Extent = 1.8" x 1.2", rotation angle = 100 degrees
  Source counts = 98.9 +/- 10.6
  Background counts = 14.1
  Rate = 0.001 +/- 0.0001

[Fri Feb 24 12:32:30 2012] Off-axis axis estimate = 6.26'
[Fri Feb 24 16:41:54 2012] Using EEF radius (= 1.76 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 16:41:54 2012] Initial guess for spatial extent in simple fitting = 1.76"
[Fri Feb 24 16:41:54 2012] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.960
[Fri Feb 24 16:41:54 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 1.76"
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src34.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src34.csv
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src34_1.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src34.csv
[Fri Feb 24 18:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src34.ximg exists
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src34_1.ximg exists
[Fri Feb 24 18:58:09 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src34 appears to have run properly
[Fri Feb 24 21:26:28 2012] Spatial fit model total counts = 117.981000, observed total counts = 118.000000
[Fri Feb 24 21:26:28 2012] Offset between fit and detection position for source 33 = 0.595104 pixels
[Fri Feb 24 21:26:28 2012] 120.332200 total counts/ 47.598000 bgd. counts: snr = 10.542517
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.595104 pixels
  Position = (596.6, 511.3) = 16 40 36.66 -48 52 17.2
  Extent = 1.2 (0.9-1.5)", rotation angle = 0
  Source counts = 72.7 +/- 11.0
  Background counts = 47.6
  Rate = 0.0008 +/- 0.0001
[Fri Feb 24 21:26:28 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:28 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:28 2012] Source does appear to be extended
[Fri Feb 24 21:26:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 01:25:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 01:25:05 2012] Initial guess for spatial extent in simple fitting = 1.17"
[Sat Feb 25 01:25:05 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.088
[Sat Feb 25 01:25:05 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 1.17"
[Sat Feb 25 03:23:00 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src34.ximg exists
[Sat Feb 25 03:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src34.csv
[Sat Feb 25 03:23:00 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src34_1.ximg exists
[Sat Feb 25 03:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src34.csv
[Sat Feb 25 03:23:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src34.ximg exists
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src34_1.ximg exists
[Sat Feb 25 03:23:01 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src34 appears to have run properly
[Sat Feb 25 05:43:16 2012] Spatial fit model total counts = 99.479200, observed total counts = 100.000000
[Sat Feb 25 05:43:16 2012] Offset between fit and detection position for source 33 = 0.303889 pixels
[Sat Feb 25 05:43:16 2012] 101.288900 total counts/ 41.937900 bgd. counts: snr = 9.164836
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.303889 pixels
  Position = (596.5, 511.6) = 16 40 36.66 -48 52 17.1
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 59.4 +/- 10.1
  Background counts = 41.9
  Rate = 0.0007 +/- 0.0001
[Sat Feb 25 05:43:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:43:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:43:16 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:43:16 2012] Source does appear to be extended
[Sat Feb 25 05:43:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 06:15:36 2012] Writing source region out to fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src33_src.reg
[Sat Feb 25 06:15:36 2012] Extracting stamp from image fullrun_ccd3_acisf04503_pi14-548_cl_sm2.00.img.gz, (551, 466) - (642, 557)
[Sat Feb 25 06:15:36 2012] Writing fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src33.gif
[Sat Feb 25 06:21:42 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src33_src.evt.gz[events] = 96 counts
[Sat Feb 25 06:21:42 2012] Mean chipx,y = (299.70, 618.72)
[Sat Feb 25 06:21:42 2012] Mean tdetx,y = (4513.28, 3360.70)
[Sat Feb 25 06:21:42 2012] chipx,y range = (280.00-321.00, 599.00-641.00)
[Sat Feb 25 06:21:42 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src33_bgd.evt.gz[events] = 74 counts
[Sat Feb 25 06:21:43 2012] Not generating rmf since there are only 59 counts
[Sat Feb 25 06:21:43 2012] arf not found, will run specextract
[Sat Feb 25 06:21:45 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src33_bkg.pi not found
[Sat Feb 25 06:21:45 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src33.warf not found
[Sat Feb 25 06:21:45 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src33.wrmf not found
[Sat Feb 25 06:21:45 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src33.soff failed
[Sat Feb 25 06:21:45 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src33_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src33_src.pi
[Sat Feb 25 06:45:37 2012] No arf file found
[Sat Feb 25 06:49:14 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:14 2012] Error reading totcts from fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src33_src.pi
[Sat Feb 25 06:49:16 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:32 2012] Source 33 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:33 2012] acisf04503/analysis//spectral/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete