[Fri Feb 24 12:32:30 2012] Detection parameters:
  Position = (767.9, 317.2) = 16 40 28.11 -48 53 52.6
  Extent = 1.2" x 0.6", rotation angle = 94 degrees
  Source counts = 38.4 +/- 6.6
  Background counts = 4.6
  Rate = 0.0004 +/- 7e-05

[Fri Feb 24 12:32:30 2012] Off-axis axis estimate = 5.23'
[Fri Feb 24 16:41:54 2012] Using EEF radius (= 1.27 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 16:41:54 2012] Initial guess for spatial extent in simple fitting = 1.27"
[Fri Feb 24 16:41:54 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.943
[Fri Feb 24 16:41:54 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 1.27"
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src81.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src81.csv
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src81_1.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src81.csv
[Fri Feb 24 18:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src81.ximg exists
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src81_1.ximg exists
[Fri Feb 24 18:58:09 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src81 appears to have run properly
[Fri Feb 24 21:26:28 2012] Spatial fit model total counts = 48.993000, observed total counts = 49.000000
[Fri Feb 24 21:26:28 2012] Offset between fit and detection position for source 207 = 0.665752 pixels
[Fri Feb 24 21:26:28 2012] 49.633700 total counts/ 21.600100 bgd. counts: snr = 6.031856
Spatial fit parameters:
  Offset between fit and detection position for source 207 = 0.665752 pixels
  Position = (768.2, 317.8) = 16 40 28.12 -48 53 52.6
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 28.0 +/- 7.0
  Background counts = 21.6
  Rate = 0.0003 +/- 8e-05
[Fri Feb 24 21:26:28 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:28 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:28 2012] Source does appear to be extended
[Fri Feb 24 21:26:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 01:25:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 01:25:05 2012] Initial guess for spatial extent in simple fitting = 0.72"
[Sat Feb 25 01:25:05 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.043
[Sat Feb 25 01:25:05 2012] Giving source the simple spatial ID 81 for pass 1, mean size = 0.72"
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src81.ximg exists
[Sat Feb 25 03:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src81.csv
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src81_1.ximg exists
[Sat Feb 25 03:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src81.csv
[Sat Feb 25 03:23:01 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src81_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src81.ximg exists
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src81_1.ximg exists
[Sat Feb 25 03:23:01 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src81 appears to have run properly
[Sat Feb 25 05:43:16 2012] Spatial fit model total counts = 46.981100, observed total counts = 47.000000
[Sat Feb 25 05:43:16 2012] Offset between fit and detection position for source 207 = 0.023673 pixels
[Sat Feb 25 05:43:16 2012] 47.565200 total counts/ 18.027000 bgd. counts: snr = 6.957005
Spatial fit parameters:
  Offset between fit and detection position for source 207 = 0.023673 pixels
  Position = (768.3, 317.8) = 16 40 28.11 -48 53 52.6
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 29.5 +/- 6.9
  Background counts = 18.0
  Rate = 0.0003 +/- 8e-05
[Sat Feb 25 05:43:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:43:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:43:16 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:43:16 2012] Source does appear to be extended
[Sat Feb 25 05:43:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 06:15:38 2012] Writing source region out to fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src207_src.reg
[Sat Feb 25 06:15:38 2012] Extracting stamp from image fullrun_ccd3_acisf04503_pi14-548_cl_sm2.00.img.gz, (734, 283) - (803, 352)
[Sat Feb 25 06:15:38 2012] Writing fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src207.gif
[Sat Feb 25 06:30:26 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src207_src.evt.gz[events] = 39 counts
[Sat Feb 25 06:30:26 2012] Mean chipx,y = (336.38, 877.28)
[Sat Feb 25 06:30:26 2012] Mean tdetx,y = (4254.72, 3397.38)
[Sat Feb 25 06:30:26 2012] chipx,y range = (317.00-354.00, 861.00-897.00)
[Sat Feb 25 06:30:26 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src207_bgd.evt.gz[events] = 33 counts
[Sat Feb 25 06:30:28 2012] Not generating rmf since there are only 29 counts
[Sat Feb 25 06:30:28 2012] arf not found, will run specextract
[Sat Feb 25 06:30:29 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src207_bkg.pi not found
[Sat Feb 25 06:30:29 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src207.warf not found
[Sat Feb 25 06:30:29 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src207.wrmf not found
[Sat Feb 25 06:30:29 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src207.soff failed
[Sat Feb 25 06:30:29 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src207_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src207_src.pi
[Sat Feb 25 06:45:37 2012] No arf file found
[Sat Feb 25 06:49:14 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:14 2012] Error reading totcts from fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src207_src.pi
[Sat Feb 25 06:49:16 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:32 2012] Source 207 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:33 2012] acisf04503/analysis//spectral/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src207_pl.csv not found, spectral fit skipped or did not complete