[Fri Feb 24 12:32:17 2012] Detection parameters:
  Position = (296.5, 771.7) = 16 40 51.56 -48 50 8.5
  Extent = 1.3" x 1.0", rotation angle = 92 degrees
  Source counts = 161.0 +/- 14.4
  Background counts = 45.0
  Rate = 0.002 +/- 0.0002

[Fri Feb 24 12:32:30 2012] Off-axis axis estimate = 8.88'
[Fri Feb 24 16:41:54 2012] Using EEF radius (= 3.48 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 16:41:54 2012] Initial guess for spatial extent in simple fitting = 3.48"
[Fri Feb 24 16:41:54 2012] source mask rpix=7.1, npix_max = 229, mask sum = 225, frac = 0.979
[Fri Feb 24 16:41:54 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 3.48"
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src17.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src17.csv
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src17_1.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src17.csv
[Fri Feb 24 18:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Feb 24 18:58:08 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Feb 24 21:26:28 2012] Spatial fit model total counts = 332.216000, observed total counts = 327.000000
[Fri Feb 24 21:26:28 2012] Offset between fit and detection position for source 19 = 0.683731 pixels
[Fri Feb 24 21:26:28 2012] 324.672100 total counts/ 247.659000 bgd. counts: snr = 4.893702
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.683731 pixels
  Position = (297.2, 771.7) = 16 40 51.55 -48 50 8.7
  Extent = 1.2 (1.0-1.6)", rotation angle = 0
  Source counts = 77.0 +/- 18.0
  Background counts = 247.7
  Rate = 0.0009 +/- 0.0002
[Fri Feb 24 21:26:28 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:28 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:28 2012] Source does appear to be extended
[Fri Feb 24 21:26:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 01:25:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 01:25:05 2012] Initial guess for spatial extent in simple fitting = 1.22"
[Sat Feb 25 01:25:05 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.014
[Sat Feb 25 01:25:05 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 1.22"
[Sat Feb 25 03:23:00 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src17.ximg exists
[Sat Feb 25 03:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src17.csv
[Sat Feb 25 03:23:00 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src17_1.ximg exists
[Sat Feb 25 03:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src17.csv
[Sat Feb 25 03:23:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Feb 25 03:23:01 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Feb 25 05:43:16 2012] Spatial fit model total counts = 120.956000, observed total counts = 121.000000
[Sat Feb 25 05:43:16 2012] Offset between fit and detection position for source 19 = 0.246795 pixels
[Sat Feb 25 05:43:16 2012] 118.442700 total counts/ 39.975600 bgd. counts: snr = 12.410524
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.246795 pixels
  Position = (297.3, 771.6) = 16 40 51.54 -48 50 8.8
  Extent = 1.2 (0.8-1.6)", rotation angle = 0
  Source counts = 78.5 +/- 10.9
  Background counts = 40.0
  Rate = 0.0009 +/- 0.0001
[Sat Feb 25 05:43:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:43:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:43:16 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:43:16 2012] Source does appear to be extended
[Sat Feb 25 05:43:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 06:15:36 2012] Writing source region out to fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src19_src.reg
[Sat Feb 25 06:15:36 2012] Extracting stamp from image fullrun_ccd3_acisf04503_pi14-548_cl_sm2.00.img.gz, (243, 717) - (352, 826)
[Sat Feb 25 06:15:36 2012] Writing fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src19.gif
[Sat Feb 25 06:18:42 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src19_src.evt.gz[events] = 133 counts
[Sat Feb 25 06:18:42 2012] Mean chipx,y = (196.35, 237.58)
[Sat Feb 25 06:18:42 2012] Mean tdetx,y = (4894.42, 3257.35)
[Sat Feb 25 06:18:42 2012] chipx,y range = (172.00-218.00, 212.00-258.00)
[Sat Feb 25 06:18:42 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 120 counts
[Sat Feb 25 06:18:44 2012] Not generating rmf since there are only 78 counts
[Sat Feb 25 06:18:44 2012] arf not found, will run specextract
[Sat Feb 25 06:18:45 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src19_bkg.pi not found
[Sat Feb 25 06:18:45 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src19.warf not found
[Sat Feb 25 06:18:45 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src19.wrmf not found
[Sat Feb 25 06:18:45 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src19.soff failed
[Sat Feb 25 06:18:45 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src19_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src19_src.pi
[Sat Feb 25 06:45:37 2012] No arf file found
[Sat Feb 25 06:49:13 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:13 2012] Error reading totcts from fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src19_src.pi
[Sat Feb 25 06:49:16 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:32 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:33 2012] acisf04503/analysis//spectral/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete